View this page in: English
Email: "ucnguBrctvdgcxgt0eqo"
Выберите язык
Запрос цены в 1 клик
Продукт
Pepperl+Fuchs
233001
NBN40-U1L-Z2
Сделать запрос
Pepperl+Fuchs 233001
NBN40-U1L-Z2
Inductive sensor
По запросу. Пожалуйста, отправьте нам письмо, чтобы узнать цену и наличие.
"ucnguBrctvdgcxgt0eqo"
Описание
Series: VariKont ®, Housing material: PA, Output type: 2-wire, Installation: non-flush, Type of voltage: DC, Connection type: screw terminals, Degree of protection: IP68 / IP69Kfa
Технические характеристики
| Switching function: | Normally open/closed (NO/NC) |
| Output type: | Two-wire |
| Rated operating distance: | 40 mm |
| Installation: | non-flush |
| Output polarity: | DC |
| Assured operating distance: | 0 ... 32.4 mm |
| Actual operating distance: | 36 ... 44 mm typ. 40 mm |
| Reduction factor rAl: | 0.39 |
| Reduction factor rCu: | 0.37 |
| Reduction factor r304: | 0.76 |
| Output type: | 2-wire |
| Operating voltage: | 5 ... 60 V DC |
| Switching frequency: | 0 ... 100 Hz |
| Hysteresis: | 1 ... 10 typ. 5 % |
| Reverse polarity protection: | reverse polarity tolerant |
| Short-circuit protection: | pulsing |
| Voltage drop: | ≤ 5 V |
| Voltage drop at IL: Voltage drop IL = 100 mA, switching element on: | ... 5 V |
| Rated insulation voltage: | 60 V |
| Operating current: | 2 ... 200 mA |
| Off-state current: | 0 ... 1 mA typ. 0.7 mA |
| Switching state indicator: | 2 LED, yellow |
| MTTFd: | 1170 a |
| Mission Time (TM): | 20 a |
| Diagnostic Coverage (DC): | 0 % |
| Standard conformity: Standards: | EN 60947-5-2:2007 IEC 60947-5-2:2007 |
| Protection class: | II |
| Standard conformity: Rated insulation voltage: | 60 V |
| Standard conformity: Rated impulse withstand voltage: | 800 V |
| UL approval: | cULus Listed, General Purpose |
| CSA approval: | cCSAus Listed, General Purpose |
| Ambient temperature: | -25 ... 85 °C (-13 ... 185 °F) |
| Storage temperature: | -25 ... 85 °C (-13 ... 185 °F) |
| Connection type: | screw terminals |
| Information for connection: | A maximum of two conductors with the same core cross section may be mounted on one terminal connection! tightening torque 1.2 Nm + 10 % |
| Core cross-section: | up to 2.5 mm2 |
| Standard conformity: Minimum core cross-section: | without wire end ferrule 0.5 mm2 , with connector sleeves 0.34 mm2 |
| Standard conformity: Maximum core cross-section: | without wire end ferrule 2.5 mm2 , with connector sleeves 1.5 mm2 |
| Housing material: | PA |
| Sensing face: | PA |
| Housing base: | plastic |
| Degree of protection: | IP68 / IP69K |
| Mass: | 225 g |
| Note: | Tightening torque: 1.8 Nm (housing) |
Логистические характеристики
| ТН ВЭД: | |
| Страна происхождения: | ID |
| EAN: | |
| Вес: | 0,00 kg |
| Длина: | 0,00 m |
| Ширина: | 0,00 m |
| Высота: | 0,00 m |