232395
NCB10-30GM40-N0-15M-OG
Inductive sensor
Series: Cylindrical type, Housing material: Stainless steel 1.4305 / AISI 303, Output type: 3-wire, Installation: flush, Type of voltage: DC, Connection type: cable PUR (halogen-free) , 15 m , screened , Oil resistant , Flame-retardant as per IEC 60332-1, Degree of protection: IP66 / IP67fa
Switching function: | Normally closed (NC) |
Output type: | NAMUR |
Rated operating distance: | 10 mm |
Installation: | flush |
Assured operating distance: | 0 ... 8.1 mm |
Actual operating distance: | 9 ... 11 mm typ. |
Reduction factor rAl: | 0.32 |
Reduction factor rCu: | 0.32 |
Reduction factor r304: | 0.72 |
Output type: | 3-wire |
Nominal voltage: | 8 V |
Switching frequency: | 0 ... 650 Hz |
Hysteresis: | 1 ... 10 typ. 5 % |
Reverse polarity protection: | reverse polarity protected |
Short-circuit protection: | yes |
Suitable for 2:1 technology: | yes , Reverse polarity protection diode not required |
Current consumption: Measuring plate not detected: | min. 3 mA |
Current consumption: Measuring plate detected: | ≤ 1 mA |
Switching state indicator: | LED, yellow |
MTTFd: | 1870 a |
Mission Time (TM): | 20 a |
Diagnostic Coverage (DC): | 0 % |
Standard conformity: NAMUR: | EN 60947-5-6:2000 IEC 60947-5-6:1999 |
Standard conformity: Standards: | EN 60947-5-2:2007 EN 60947-5-2/A1:2012 IEC 60947-5-2:2007 IEC 60947-5-2 AMD 1:2012 |
UL approval: Ordinary Location: | E87056 |
UL approval: Hazardous Location: | E501628 |
UL approval: Control drawing: | 116-0452 |
CSA approval: | cCSAus Listed, General Purpose |
CCC approval: | CCC approval / marking not required for products rated ≤36 V |
Ambient temperature: | -25 ... 80 °C (-13 ... 176 °F) |
Storage temperature: | -40 ... 80 °C (-40 ... 176 °F) |
Connection type: | cable PUR (halogen-free) , 15 m , screened , Oil resistant , Flame-retardant as per IEC 60332-1 |
Core cross-section: | 2x 0.5 mm2 |
Housing material: | Stainless steel 1.4305 / AISI 303 |
Sensing face: | PBT |
Degree of protection: | IP66 / IP67 |
Cable: Bending radius: | > 7.5 x cable diameter |
Note: | The shield is not connected to the sensor. |
Use in the hazardous area: | see instruction manuals |
ТН ВЭД: | |
Страна происхождения: | DE |
EAN: | |
Вес: | 0,00 kg |
Длина: | 0,00 m |
Ширина: | 0,00 m |
Высота: | 0,00 m |