View this page in: English
Email: "ucnguBrctvdgcxgt0eqo"
Выберите язык
Запрос цены в 1 клик
Продукт
Pepperl+Fuchs
226315
NBB20-U1-B3B
Сделать запрос
Pepperl+Fuchs 226315
NBB20-U1-B3B
Inductive sensor
По запросу. Пожалуйста, отправьте нам письмо, чтобы узнать цену и наличие.
"ucnguBrctvdgcxgt0eqo"
Описание
Series: VariKont ®, Housing material: PA/metal with epoxy powder coating, Output type: 2-wire, Installation: flush, Type of voltage: DC, Connection type: screw terminals, Degree of protection: IP68 / IP69Kfa
Технические характеристики
| Switching function: | Normally open/closed (NO/NC) programmable |
| Output type: | AS-Interface |
| Rated operating distance: | 20 mm |
| Installation: | flush |
| Assured operating distance: | 0 ... 16.2 mm |
| Actual operating distance: | 18 ... 22 mm typ. 20 mm |
| Reduction factor rAl: | 0.4 |
| Reduction factor rCu: | 0.35 |
| Reduction factor r304: | 0.85 |
| Slave type: | A/B slave |
| AS-Interface specification: | V3.0 |
| Required master specification: | ≥ V2.1 |
| Output type: | 2-wire |
| Operating voltage: | 26.5 ... 31.9 V via AS-i bus system |
| Switching frequency: | 0 ... 150 Hz |
| Hysteresis: | 1 ... 15 typ. 5 % |
| Reverse polarity protection: | reverse polarity protected |
| No-load supply current: | ≤ 25 mA |
| Time delay before availability: | ≤ 1000 ms |
| Operating voltage indicator: | LED, green |
| Switching state indicator: | LED, yellow |
| Error indicator: | LED, red |
| MTTFd: | 1330 a |
| Mission Time (TM): | 20 a |
| Diagnostic Coverage (DC): | 0 % |
| Standard conformity: Standards: | EN 60947-5-2:2007 IEC 60947-5-2:2007 |
| UL approval: | cULus Listed, General Purpose |
| CSA approval: | cCSAus Listed, General Purpose |
| CCC approval: | CCC approval / marking not required for products rated ≤36 V |
| Ambient temperature: | -25 ... 70 °C (-13 ... 158 °F) |
| Storage temperature: | -40 ... 85 °C (-40 ... 185 °F) |
| Connection type: | screw terminals |
| Information for connection: | A maximum of two conductors with the same core cross section may be mounted on one terminal connection! tightening torque 1.2 Nm + 10 % |
| Core cross-section: | up to 2.5 mm2 |
| Standard conformity: Minimum core cross-section: | without wire end ferrule 0.5 mm2 , with connector sleeves 0.34 mm2 |
| Standard conformity: Maximum core cross-section: | without wire end ferrule 2.5 mm2 , with connector sleeves 1.5 mm2 |
| Housing material: | PA/metal with epoxy powder coating |
| Sensing face: | PBT |
| Housing base: | plastic |
| Degree of protection: | IP68 / IP69K |
Логистические характеристики
| ТН ВЭД: | |
| Страна происхождения: | ID |
| EAN: | |
| Вес: | 0,00 kg |
| Длина: | 0,00 m |
| Ширина: | 0,00 m |
| Высота: | 0,00 m |