View this page in: English
Email: "ucnguBrctvdgcxgt0eqo"
Выберите язык
Запрос цены в 1 клик
Продукт
Pepperl+Fuchs
217921
NBN40-U1-E2-M
Сделать запрос
Pepperl+Fuchs 217921
NBN40-U1-E2-M
Inductive sensor
По запросу. Пожалуйста, отправьте нам письмо, чтобы узнать цену и наличие.
"ucnguBrctvdgcxgt0eqo"
Описание
Series: VariKont ®, Housing material: PA/metal with epoxy powder coating, Output type: 3-wire, Installation: non-flush, Type of voltage: DC, Connection type: screw terminals, Degree of protection: IP68 / IP69Kfa
Технические характеристики
| Switching function: | Normally open (NO) |
| Output type: | PNP |
| Rated operating distance: | 40 mm |
| Installation: | non-flush |
| Output polarity: | DC |
| Assured operating distance: | 0 ... 32.4 mm |
| Actual operating distance: | 36 ... 44 mm |
| Reduction factor rAl: | 0.34 |
| Reduction factor rCu: | 0.3 |
| Reduction factor r304: | 0.81 |
| Reduction factor rSt37: | 1 |
| Reduction factor rBrass: | 0.4 |
| Operating voltage: | 10 ... 60 V DC |
| Switching frequency: | 0 ... 150 Hz |
| Hysteresis: | typ. 5 % |
| Reverse polarity protection: | reverse polarity protected |
| Short-circuit protection: | pulsing |
| Voltage drop: | ≤ 2 V |
| Operating current: | 0 ... 200 mA |
| Off-state current: | 0 ... 0.5 mA |
| No-load supply current: | ≤ 20 mA |
| Operating voltage indicator: | LED, green |
| Switching state indicator: | LED, yellow |
| MTTFd: | 880 a |
| Mission Time (TM): | 20 a |
| Diagnostic Coverage (DC): | 0 % |
| UL approval: | cULus Listed, General Purpose |
| CSA approval: | cCSAus Listed, General Purpose |
| CCC approval: | Certified by China Compulsory Certification (CCC) |
| E1 Type approval: | 10R-04 |
| Ambient temperature: | -40 ... 85 °C (-40 ... 185 °F) |
| Connection type: | screw terminals |
| Information for connection: | A maximum of two conductors with the same core cross section may be mounted on one terminal connection! tightening torque 1.2 Nm + 10 % |
| Core cross-section: | up to 2.5 mm2 |
| : Minimum core cross-section: | without wire end ferrule 0.5 mm2 , with connector sleeves 0.34 mm2 |
| : Maximum core cross-section: | without wire end ferrule 2.5 mm2 , with connector sleeves 1.5 mm2 |
| Housing material: | PA/metal with epoxy powder coating |
| Sensing face: | PA-GF35 |
| Degree of protection: | IP68 / IP69K |
| Mass: | 225 g |
| Note: | Tightening torque: 1.8 Nm (housing) |
Логистические характеристики
| ТН ВЭД: | |
| Страна происхождения: | VN |
| EAN: | |
| Вес: | 0,00 kg |
| Длина: | 0,00 m |
| Ширина: | 0,00 m |
| Высота: | 0,00 m |