213969
NCB3-14GM65-E2-D-V1
Inductive sensor
Series: Cylindrical type, Housing material: Stainless steel 1.4305 / AISI 303, Output type: 3-wire, Installation: flush, Type of voltage: DC, Connection type: Connector plug M12 x 1 , 4-pin, Degree of protection: IP68fa
| Switching function: | Normally open (NO) |
| Output type: | PNP |
| Rated operating distance: | 3 mm |
| Installation: | flush |
| Output polarity: | DC |
| Reduction factor rAl: | 0 |
| Reduction factor rCu: | 0 |
| Reduction factor r304: | 0.85 |
| Reduction factor rSt37: | 1 |
| Reduction factor rBrass: | 0.15 |
| Output type: | 3-wire |
| Operating voltage: | 10 ... 30 V DC |
| Switching frequency: | 0 ... 500 Hz |
| Hysteresis: | typ. 10 % |
| Reverse polarity protection: | reverse polarity protected |
| Short-circuit protection: | pulsing |
| Voltage drop: | ≤ 2 V |
| Repeat accuracy: | 0.1 mm |
| Temperature drift: | ± 15% max. |
| Operating current: | ≤ 200 mA |
| No-load supply current: | ≤ 10 mA |
| Time delay before availability: | ≤ 10 ms |
| Operating pressure: | 500 bar (7252 psi) |
| Peak pressure: | 800 bar (11603.2 psi) |
| Standard conformity: Standards: | EN 60947-5-2:2007 IEC 60947-5-2:2007 |
| UL approval: | cULus Listed, General Purpose |
| CSA approval: | cCSAus Listed, General Purpose |
| CCC approval: | CCC approval / marking not required for products rated ≤36 V |
| Ambient temperature: | -25 ... 80 °C (-13 ... 176 °F) |
| Connection type: | Connector plug M12 x 1 , 4-pin |
| Housing material: | Stainless steel 1.4305 / AISI 303 |
| Sensing face: | Ceramic |
| Degree of protection: | IP68 |
| Mass: | 73 g |
| ТН ВЭД: | |
| Страна происхождения: | CH |
| EAN: | |
| Вес: | 0,06 kg |
| Длина: | 0,00 m |
| Ширина: | 0,00 m |
| Высота: | 0,00 m |