View this page in: English
Email: "ucnguBrctvdgcxgt0eqo"
Выберите язык
Запрос цены в 1 клик
Продукт
Pepperl+Fuchs
213968
KFU8-SR-1.3L.V
Сделать запрос
Pepperl+Fuchs 213968
KFU8-SR-1.3L.V
Switch Amplifier, Timer Relay
По запросу. Пожалуйста, отправьте нам письмо, чтобы узнать цену и наличие.
"ucnguBrctvdgcxgt0eqo"
Описание
1-channel signal conditioner, Universal usage at different power supplies, 3-wire PNP/NPN sensor or push-pull input, 2 relay contact outputs, Adjustable energized/de-energized delaypa. This signal conditioner converts the state of 3-wire sensors (PNP or NPN) or sensors with push-pull output stages into two relay outputs. It has one input and two form C changeover relay outputs. The switch amplifier has an adjustable energized/de-energized delay for the relay outputs. The start-up time of the device is as long as the time setting value + 500 ms.
Технические характеристики
| Signal type: | Digital Input |
| Connection: | terminals 14, 15 |
| Rated voltage: | 20 ... 48 V DC or 90 ... 253 V AC , 45 ... 65 Hz |
| Rated current: | ≤ 230 mA |
| Power dissipation: | 2.3 W |
| Power consumption: | max. 4.5 W |
| Connection side: | field side |
| Connection: | terminals 1+, 2, 3- |
| Rated values: | 22 ... 24 V DC / 100 mA , see additional information |
| Short-circuit current: | max. 125 mA |
| Switching point: | PNP: 0-signal: < 12.5 V 1-signal: > 13.5 V NPN and push-pull output: 0-signal: < 4.5 V 1-signal: > 5.5 V |
| Connection side: | control side |
| Connection: | output I: terminals 7, 8, 9 output II: terminals 10, 11, 12 |
| Output I, II: | signal, relay |
| : Contact loading: | 250 V AC / 2 A / cos φ ≥ 0.7 ; 125 V AC/4 A/ cos φ > 0.7 ; 40 V DC / 2 A |
| : Mechanical life: | 20 x 106 switching cycles |
| : Electrical life: | 0.2 x 106 switching cycles (40 V DC, 2 A, ohmic) 0.4 x 106 switching cycles (253 V AC, 2 A, cos φ = 1) 0.25 x 106 switching cycles (253 V AC, 2 A, cos φ = 0.7) |
| : Minimum load: | 50 mW, 5 V DC |
| : Energized/De-energized delay: | ≤ 90 ms / ≤ 90 ms |
| Switching frequency: | ≤ 5 Hz for delay 0 s adjustable energized/de-energized delay: 0 ... 79 s |
| Input/Output: | reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff |
| Input/power supply: | reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff |
| Output/power supply: | reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff |
| Output/Output: | reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff |
| Display elements: | LEDs |
| Control elements: | DIP-switch |
| Configuration: | via DIP switches |
| Labeling: | space for labeling at the front |
| Electromagnetic compatibility: Directive 2014/30/EU: | EN 61326-1:2013 (industrial locations) |
| Low voltage: Directive 2014/35/EU: | EN 61010-1:2010 |
| Electromagnetic compatibility: | NE 21:2012 |
| Degree of protection: | IEC 60529:2001 |
| Ambient temperature: | -20 ... 60 °C (-4 ... 140 °F) |
| Degree of protection: | IP20 |
| Connection: | screw terminals |
| Mass: | approx. 166 g |
| Dimensions: | 20 x 119 x 115 mm (0.8 x 4.7 x 4.5 inch) , housing type B2 |
| Mounting: | on 35 mm DIN mounting rail acc. to EN 60715:2001 |
| Supply: | 48 V DC |
| Certificate: | PF 10 CERT 1417 X |
| Low voltage: Marking: | II 3G Ex nA nC IIC T4 Gc |
| Output I, II: Contact loading: | 50 V AC/2 A/cos φ > 0.7; 40 V DC/1 A resistive load |
| Directive conformity: Directive 2014/34/EU: | EN 60079-0:2012+A11:2013 , EN 60079-15:2010 |
| Supplementary information: | Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com. |
Логистические характеристики
| ТН ВЭД: | |
| Страна происхождения: | SG |
| EAN: | |
| Вес: | 0,00 kg |
| Длина: | 0,00 m |
| Ширина: | 0,00 m |
| Высота: | 0,00 m |