Pepperl+Fuchs
205835
TopScan-S-MS/L900
Pepperl+Fuchs 205835
TopScan-S-MS/L900
Active infrared scanner
Описание
Moving presence sensor for swing doors, Configurable for a wide range of door leaf widths, Category 2, tested and certified to DIN 18650/EN 16005, Modular construction with master/slave modules, Safe function even on difficult floors, Function: Open and secure, Sensor principle: Active infrared scannerfa. The TopScan-S is a presence sensor for automatic revolving doors that operates according to the active infrared principle in background evaluation, and can be installed for mobile use in addition to static use. The modular structure consisting of master and slave modules means that the systems can be configured for different door panel widths up to 1400 mm. Up to 7 individually adjustable beams can be used in one device. This ensures test object detection across the entire door width. The sensors are certified according to the current DIN 18650/EN 16005 standard and, in conjunction with an appropriate, safe controller, fulfill all requirements for testable active opto-electronic protective devices (AOPDs) in Category 2.
Технические характеристики
| Detection range min.: | 0 ... 1500 mm |
| Detection range max.: | 0 ... 2500 mm |
| Reference target: | Minimum degree of reflection of the floor: 6 % Minimum degree of reflection to objects being detected: 0 % |
| Light source: | IRED |
| Light type: | modulated infrared light 875 nm |
| Black/White difference (6 %/90 %): | < 2 % at 2000 mm sensor range |
| Number of beams: | 2 (number of built-in sensor modules AIR) |
| Operating mode: | Background evaluation |
| Diameter of the light spot: | 1.1 cm x 8.3 cm at 2000 mm sensor range |
| Resolution: | Reference object CA DIN 186850-1/EN 16005 in all applicable locations |
| Safety Integrity Level (SIL): | SIL 1 |
| Performance level (PL): | PL c |
| Category: | Cat. 2 |
| MTTFd: | 880 a per module |
| Mission Time (TM): | 20 a |
| Diagnostic Coverage (DC): | 90 % |
| Function indicator: | LED red/green |
| Control elements: | Sensing range adjuster ; Adjuster for edge monitoring left/right |
| Operating voltage: | 24 V DC +/- 20 % |
| No-load supply current: | 140 mA |
| Test input: | active at U = 11 V DC at 30 V DC inactive at U = -3 V DC at 5 V DC |
| Switching type: | Relay de-energized at object inside the scanning range |
| Signal output: | Relay, 1 alternator |
| Switching voltage: | 5 V ... 30 V AC/DC |
| Switching current: | max. 300 mA |
| Response time: | ≤ 70 ms |
| Functional safety: | ISO 13849-1 |
| Product standard: | EN 12978 ; EN 16005 ; DIN 18650 |
| CCC approval: | CCC approval / marking not required for products rated ≤36 V |
| TÜV approval: | TÜV NORD |
| Ambient temperature: | -10 ... 50 °C (14 ... 122 °F) |
| Relative humidity: | Humidity at 20 °C: < 90 % Humidity at 60 °C: < 50 % |
| Housing length L: | 900 mm |
| Mounting height: | max. 2500 mm |
| Degree of protection: | IP52 , IP54 Optional (with special seal) |
| Connection: | screw terminals ; Cable cross-section 0.3 mm2 ... 1.3 mm2 (AWG26-16), single-stranded/multistranded CU |
| Material: Housing: | aluminum / ABS |
| Material: Optical face: | PMMA |
| Note: | Safety fuse ≤ 1 A (slow-blow) according to IEC 60127-2 Sheet 1 Recommendation: after a short circuit, check that the device is functioning correctly. |
Логистические характеристики
| ТН ВЭД: | |
| Страна происхождения: | SG |
| EAN: | |
| Вес: | 0,00 kg |
| Длина: | 0,00 m |
| Ширина: | 0,00 m |
| Высота: | 0,00 m |