205344
UB800-18GM40A-E5-V1
Ultrasonic sensor
Single head system, Short design, 40 mm, Function indicators visible from all directions, Switch output, Series: -18GM, Housing: brass, nickel-plated, Connection type: Connector M12 x 1 , 4-pinfa
| Sensing range: | 50 ... 800 mm |
| Adjustment range: | 70 ... 800 mm |
| Dead band: | 0 ... 50 mm |
| Standard target plate: | 100 mm x 100 mm |
| Transducer frequency: | approx. 255 kHz |
| Response delay: | approx. 100 ms |
| LED green: | Power on |
| LED yellow: | indication of the switching state flashing: program function object detected |
| LED red: | solid red: Error red, flashing: program function, object not detected |
| Operating voltage: | 10 ... 30 V DC , ripple 10 %SS |
| No-load supply current: | ≤ 20 mA |
| Input type: | 1 program input operating distance 1: -UB ... +1 V, operating distance 2: +6 V ... +UB input impedance: > 4,7 kΩ program pulse: ≥ 1 s |
| Output type: | 1 switching output E5, PNP NO/NC, programmable |
| Rated operating current: | 200 mA , short-circuit/overload protected |
| Default setting: | Switch point A1: 70 mm Switch point A2: 800 mm |
| Voltage drop: | ≤ 3 V |
| Repeat accuracy: | ≤ 1 % |
| Switching frequency: | ≤ 4 Hz |
| Range hysteresis: | 1 % of the set operating distance |
| Temperature influence: | ± 1.5 % of full-scale value |
| UL approval: | cULus Listed, General Purpose |
| CSA approval: | cCSAus Listed, General Purpose |
| CCC approval: | CCC approval / marking not required for products rated ≤36 V |
| Ambient temperature: | -25 ... 70 °C (-13 ... 158 °F) |
| Storage temperature: | -40 ... 85 °C (-40 ... 185 °F) |
| Connection type: | Connector M12 x 1 , 4-pin |
| Degree of protection: | IP67 |
| Material: Housing: | brass, nickel-plated |
| Material: Transducer: | epoxy resin/hollow glass sphere mixture; foam polyurethane, cover PBT |
| Mass: | 25 g |
| ТН ВЭД: | |
| Страна происхождения: | SG |
| EAN: | |
| Вес: | 0,00 kg |
| Длина: | 0,00 m |
| Ширина: | 0,00 m |
| Высота: | 0,00 m |