Pepperl+Fuchs
192797
KFD2-USC-1.D
Pepperl+Fuchs 192797
KFD2-USC-1.D
Signal Converter with Trip Value
Описание
1-channel signal conditioner, 24 V DC supply (Power Rail), Scaleable current or voltage input, Current or voltage output, Relay contact output, Configurable by keypad, Line fault detection (LFD)pa. This signal conditioner is suitable for the connection of current and voltage signals and provides isolation for non-intrinsically safe applications. The input ranges include 0 mA ... 20 mA, 0 V ... 10 V or 0 mV ... 60 mV. Subranges from the input ranges are selectable. The output measuring signals are 0/4 mA ... 20 mA, 0/2 V ... 10 V or 0/1 V ... 5 V. The output relay serves as trip value contact. On the display the measured value can be indicated in various physical units. The unit is easily programmed by the use of a keypad located on the front of the unit. For additional information, refer to the manual and www.pepperl-fuchs.com.
Технические характеристики
| Signal type: | Analog input |
| Connection: | terminals 14+, 15- or Power Rail |
| Rated voltage: | 20 ... 30 V DC |
| Rated current: | ≤ 80 mA DC |
| Power consumption: | ≤ 1.6 W |
| Connection side: | field side |
| Connection: | terminals 1+, 3- : mV, V ; terminals 2+, 3- : mA |
| Input resistance: | voltage: 1 MΩ , current: max. 100 Ω |
| Limit: | 30 V |
| Current: | 0 ... 20 mA |
| Voltage: | 0 ... 10 V / 0 ... 60 mV |
| Resolution: | 15 Bit |
| Connection side: | control side |
| Connection: | output I: terminals 10, 11, 12 output II: terminals 7-, 8+, 9- |
| Output I: | signal, relay |
| : Contact loading: | 250 V AC/2 A/cos φ 0.7; 40 V DC/2 A |
| : Mechanical life: | 2 x 107 switching cycles |
| : Energized/De-energized delay: | approx. 10 ms / approx. 10 ms |
| Output II: | analog |
| : Load: | current: max. 550 Ω , voltage: min. 1 kΩ |
| : Analog voltage output: | 0/1 ... 5 V , 0/2 ... 10 V |
| : Analog current output: | 0/4 ... 20 mA |
| Deviation: | 0.1 % of full-scale value |
| : Resolution/accuracy: | current: 1 µA/20 µA voltage: 0.5 mV/10 mV mV: 3 µV/60 µV |
| : Influence of ambient temperature: | 0.003 %/K (30 ppm) |
| Reaction time: | ≥ 150 ms/≤ 300 ms |
| Input/Output: | reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff |
| Input/power supply: | reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff |
| Output/power supply: | reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff |
| Display elements: | display |
| Control elements: | Control panel |
| Configuration: | via operating buttons |
| Labeling: | space for labeling at the front |
| Electromagnetic compatibility: Directive 2014/30/EU: | EN 61326-1:2013 (industrial locations) |
| Low voltage: Directive 2014/35/EU: | EN 61010-1:2010 |
| Electromagnetic compatibility: | NE 21 |
| Degree of protection: | IEC 60529 |
| Ambient temperature: | -20 ... 60 °C (-4 ... 140 °F) |
| Degree of protection: | IP20 |
| Connection: | screw terminals |
| Mass: | 150 g |
| Dimensions: | 20 x 119 x 115 mm (0.8 x 4.7 x 4.5 inch) , housing type B3 |
| Mounting: | on 35 mm DIN mounting rail acc. to EN 60715:2001 |
| Supplementary information: | Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com. |
Логистические характеристики
| ТН ВЭД: | |
| Страна происхождения: | SG |
| EAN: | |
| Вес: | 0,00 kg |
| Длина: | 0,00 m |
| Ширина: | 0,00 m |
| Высота: | 0,00 m |