190763
NBB6-F-B3
Inductive sensor
Series: Rectangular type, Housing material: PBT, Output type: 2-wire, Installation: flush, Type of voltage: DC, Connection type: cable PVC , 2 m, Degree of protection: IP67fa
| Switching function: | Normally open/closed (NO/NC) programmable |
| Output type: | AS-Interface |
| Rated operating distance: | 6 mm |
| Installation: | flush |
| Assured operating distance: | 0 ... 4.86 mm |
| Reduction factor rAl: | 0.28 |
| Reduction factor rCu: | 0.25 |
| Reduction factor r304: | 0.75 |
| Slave type: | Standard slave |
| AS-Interface specification: | V2.1 |
| Required master specification: | ≥ V2.1 |
| Output type: | 2-wire |
| Operating voltage: | 26.5 ... 31.9 V via AS-i bus system |
| Switching frequency: | ≥ 500 (P3=0), |
| Hysteresis: | typ. 5 % |
| Operating current: | 20 mA |
| Time delay before availability: | ≤ 1000 ms |
| MTTFd: | 1873 a |
| Mission Time (TM): | 20 a |
| Diagnostic Coverage (DC): | 0 % |
| LED POWER: | AS-Interface voltage; LED green |
| LED IN: | switching state (input); LED yellow |
| LED OUT: | Dual LED yellow/red yellow: switching state red: error mode |
| Rated operating voltage: | 26.5 ... 31.6 V from AS-Interface |
| Standard conformity: Standards: | EN 60947-5-2:2007 IEC 60947-5-2:2007 EN 50295:1999 |
| UL approval: | cULus Listed, General Purpose |
| CSA approval: | cCSAus Listed, General Purpose |
| CCC approval: | CCC approval / marking not required for products rated ≤36 V |
| Ambient temperature: | -25 ... 70 °C (-13 ... 158 °F) |
| Storage temperature: | -40 ... 85 °C (-40 ... 185 °F) |
| Connection type: | cable PVC , 2 m |
| Core cross-section: | 0.34 mm2 |
| Housing material: | PBT |
| Degree of protection: | IP67 |
| Mass: | 90 g |
| ТН ВЭД: | |
| Страна происхождения: | ID |
| EAN: | |
| Вес: | 0,00 kg |
| Длина: | 0,00 m |
| Ширина: | 0,00 m |
| Высота: | 0,00 m |