Pepperl+Fuchs 190149

KFU8-DW-1.D

Rotation Speed Monitor

По запросу. Пожалуйста, отправьте нам письмо, чтобы узнать цену и наличие.
"ucnguBrctvdgcxgt0eqo"

Описание

Speed monitoring up to 40 kHz, 1 pre-select value with relay output and LED indicator, 2-, 3-, 4-wire and NAMUR sensors as well as rotary encoder connectable, Start-up delay, Menu driven operation via 4 front keys, Period measurement, Output signal can be inverted, Display devices can be set between 0.1 ... 2.5 sec.pa

Технические характеристики

Signal type: Digital Input
MTTFd: 100 a
Rated voltage: 200 ... 230 V AC ; 100 … 130 V AC; 50/60 Hz 20 VDC ... 30 VDC
Fusing: external fusing 4 A
Power consumption: AC: < 5 VA DC: < 5 W
Connection side: field side
Connection: terminals 8-, 9+
Connectable sensor types: NAMUR sensors according to DIN EN 60947-5-6
Open loop voltage: 8.2 V DC
Short-circuit current: 6.5 mA
Switching point: 1.2 ... 2.1 mA Switching hysteresis approx. 0.2 mA
Input frequency: 0.002 ... 10000 Hz, pulse length/duration: ≥ 20µs
Impedance: 1.2 kΩ
Switching point: high: 16 ... 30 V DC; max.10 mA due to integrated constant current sink; Ri ≅ 3 kΩ low: 0 ... 6 V DC
Input frequency: 0.002 ... 40000 Hz, pulse length/duration: ≥ 12µs
Connection: terminals 7+, 13- sensor supply terminals 14, 15 NPN/PNP input (galvanically isolated)
Connectable sensor types: Two, three, or four-wire proximity switch, incremental rotary encoder, or externally generated pulses 16 ... 30 V
Sensor supply: 19 ... 28 V DC non-stabilised; ≤ 30 mA short-circuit protected
Start-up override: Triggering by external signal 16 ... 30 V or Place jumper between terminals 2/3 or by switching on supply voltage (terminal 2 and terminal 3 permanently bridged)
Jumpering time: 0.1 ... 999.9 s (External trigger signal)
Connection side: control side
Relay: 1 changeover contact NO, NC, COM
Sensor supply: 24 V DC ± 10 %, 30 mA , short-circuit protected
Contact loading: 250 V AC/2 A/ cos φ ≥ 0.7 40 V DC/2 A
Delay: ≤ 20 ms (incl. calculation time)
Mechanical life: ≥ 30.000.000 switching cycles
Changing interval: 5 ms (Internal processing time)
Time delay before availability: ≤ 400 ms
Measuring error: 0 ... 40000 Hz: ≤ ±0,10% Display: ±1 digit
Timer function: ON-delay, OFF-delay, one shot, pulse extension
Time: 0 ... 999.9 s ; mode of operation reversible
Display elements: display , 4-digit, 7-segment red display, 7 mm digit height and LED
LED indication: yellow LED : switching state
Display indication: 0.002 ... 9999 Hz or 0,01 ... 9999 min-1
Control elements: Control panel
Configuration: via operating buttons
Labeling: space for labeling at the front
Electromagnetic compatibility: acc. to EN 50081-2 / EN 50082-2
Ambient temperature: -25 ... 40 °C (-13 ... 104 °F)
Storage temperature: -40 ... 85 °C (-40 ... 185 °F)
Relative humidity: max. 80 %, not condensing
Altitude: 0 ... 2000 m
Operating conditions: The device has only to be used in an indoor area.
Connection assembly: Caution: Please be aware that the device may only be connected to a switchable power supply. The switch or circuit breaker must be easy to reach and identified as the separator for the device.
Degree of protection: IP20
Connection: coded, removable terminals , max. core cross section 0.34 ... 2.5 mm2
Construction type: modular terminal housing in Makrolon, System KF For use in the switch cabinet/switch cabinet module
Mounting: snap-on to 35 mm standard rail or screw fixing
Supplementary information: Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.

Логистические характеристики

ТН ВЭД:
Страна происхождения: DE
EAN:
Вес: 0,00 kg
Длина: 0,00 m
Ширина: 0,00 m
Высота: 0,00 m