132618
DF12-11-3K/145/151
Print mark color sensor
Print mark color sensor, 11 mm detection range, RGB light, external Teach-In, 3 push-pull outputs, M12 plug, Diffuse mode sensor for recording colored print marks on backgrounds with different colors, Color detection by means of the active three-range method, TEACH-IN procedure for automatic threshold value setting, 3 independent channels, 3 tolerance steps per channelfa
| Sensor range: | 11 mm ± 2 mm |
| Light source: | 3 LEDs (R,G,B) |
| Light type: | Visible green/red/blue, modulated light |
| Light spot representation: | 1 mm x 3 mm |
| Angle deviation: | max. ± 3° |
| MTTFd: | 730 a |
| Mission Time (TM): | 20 a |
| Diagnostic Coverage (DC): | 60 % |
| Operation indicator: | LED green, statically lit Power on , Undervoltage indicator: Green LED, pulsing (approx. 0.8 Hz) , short-circuit : LED green flashing (approx. 4 Hz) |
| Function indicator: | 2 LEDs yellow, light up in case of detection |
| Teach-In indicator: | Teach-In channel: LED green/yellow equiphase flashing; 2.5 Hz . Teach-In tolerance: LED green/yellow non equiphase flashing; 2.5 Hz . |
| Control elements: | 2 Teach-In rotary switch for Teach-In channel and Teach-In tolerance . |
| Operating voltage: | 10 ... 30 V DC |
| Ripple: | 10 % |
| No-load supply current: | ≤ 40 mA |
| Protection class: | II, rated voltage ≤ 250 V AC with pollution degree 1-2 according to IEC 60664-1 |
| Function input: | Ext. Teach-In input (ET) Ext. blanking-input (AT) |
| Signal output: | 3 push-pull (4 in 1) outputs, short-circuit proof, reverse polarity protected |
| Switching voltage: | max. 30 V DC |
| Switching current: | max. 100 mA |
| Switching frequency: | 500 Hz |
| Response time: | 1 ms |
| Product standard: | EN 60947-5-2 |
| CCC approval: | CCC approval / marking not required for products rated ≤36 V |
| Approvals: | CE, cULus |
| Ambient temperature: | -20 ... 60 °C (-4 ... 140 °F) |
| Storage temperature: | -20 ... 75 °C (-4 ... 167 °F) |
| Housing width: | 41.5 mm |
| Housing height: | 49 mm |
| Housing depth: | 15 mm |
| Degree of protection: | IP67 |
| Connection: | 8-pin, M12 metal connector, 90° convertible |
| Material: Housing: | Frame: nickel plated, die cast zinc, Laterals: glass-fiber reinforced plastic PC |
| Material: Optical face: | Plastic pane |
| Mass: | 60 g |
| Note: | (use V19 type connection cable ) |
| ТН ВЭД: | |
| Страна происхождения: | SG |
| EAN: | |
| Вес: | 0,00 kg |
| Длина: | 0,00 m |
| Ширина: | 0,00 m |
| Высота: | 0,00 m |