130150
U-P6-B6-V15B SLKopf
Base for read/write station
Base for PROFIBUS DP, plug-in connectionfa. The base is used in combination with an upper part, the IPT*-FP read/write station. The device is operated as a slave on the PROFIBUS DP. The device makes available the complete read/write functionality. Up to 32 bytes are transmitted per cycle. Of these, up to 7 double words, each with 32 bits, are available to the user. The rounded connector M12 for BUS and supply allows a rapid assembly.
| DIP switch: | Setting the station address bus connection ON = active OFF = non-active |
| Rated operating voltage: | 20 ... 30 V DC , ripple 10 %SS , PELV |
| Power consumption: | max. 5 W with read/write head IPT*-FP |
| Galvanic isolation: Operating voltage/interface: | functional insulation acc. to DIN EN 50178, rated insulation voltage 50 Veff |
| Physical: | RS-485 |
| Protocol: | PROFIBUS DP acc. to EN 50170 |
| Transfer rate: | 9.6; 19.2; 93.75; 187.5; 500; 1500 kBit/s 3; 6; 12 Mbit/s self-synchronizing |
| Ambient temperature: | -25 ... 70 °C (-13 ... 158 °F) |
| Storage temperature: | -40 ... 85 °C (-40 ... 185 °F) |
| Climatic conditions: | air humidity max. 95 % |
| Degree of protection: | IP67 according to EN 60529 with IPT*-FP |
| Connection: | 4-pin, M12 x 1 connector for supply; M12 x 1 device socket, 5-pin, B-coded for PROFIBUS |
| Material: Housing: | aluminum, black anodized |
| ТН ВЭД: | |
| Страна происхождения: | Deutschland |
| EAN: | 4050143013999 |
| Вес: | 0,77 kg |
| Длина: | 0,00 m |
| Ширина: | 0,00 m |
| Высота: | 0,00 m |