110697
U-P3-RX
Base for read/write station
The base is used in combination with an upper part, the IPT*-FP read/write station. Either an RS 232- or an RS 485-interface is available. Base with serial interfaces RS 232 and RS 485fa. The read/write station is connected to a higher-order control system via the serial interface and receives the commands for writing and/or reading code or data carriers via this interface.
| Rated operating voltage: | 20 ... 30 V DC , ripple 10 %SS , PELV |
| Power consumption: | max. 4 W with read/write head IPT*-FP |
| Galvanic isolation: Operating voltage/interface: | functional insulation acc. to DIN EN 50178, rated insulation voltage 50 Veff |
| Physical: | RS-232/RS-485 |
| Protocol: | ASCII |
| Transfer rate: | 1200; 2400; 4800; 9600; 19200; 38400 |
| Cable length: | ≤ 15 m at RS 232 ≤ 1200 m at RS-485 |
| EAC conformity: | TR CU 020/2011 |
| Ambient temperature: | -25 ... 70 °C (-13 ... 158 °F) |
| Storage temperature: | -40 ... 85 °C (-40 ... 185 °F) |
| Degree of protection: | IP67 according to EN 60529 with IPT*-FP |
| Connection: | screw terminals |
| Interface cable: | 3 conductor, acc. to RS-232 or 2 acc. to RS-485 |
| Supply: | up to 3 x 1.5 mm2 |
| Material: Housing: | diecast aluminum |
| ТН ВЭД: | |
| Страна происхождения: | DE |
| EAN: | |
| Вес: | 0,00 kg |
| Длина: | 0,00 m |
| Ширина: | 0,00 m |
| Высота: | 0,00 m |