View this page in: English
Email: "ucnguBrctvdgcxgt0eqo"
Выберите язык
Запрос цены в 1 клик
Продукт
Pepperl+Fuchs
110696
U-P3-R4
Сделать запрос
Pepperl+Fuchs 110696
U-P3-R4
Base for read/write station
По запросу. Пожалуйста, отправьте нам письмо, чтобы узнать цену и наличие.
"ucnguBrctvdgcxgt0eqo"
Описание
The base is used in combination with an upper part, the IPT*-FP read/write station. An addressable RS 485 interface is available. It is thus possible to create a simple bus connection with up to 30 subscribers. Base with addressable serial Interface RS 485fa. The address is set and the terminating resistor for the bus is connected via DIP switches. The read/write station is connected to a higher-order control system via the serial interface and receives the commands for writing and/or reading code or data carriers via this interface.
Технические характеристики
| DIP switch: | Setting the station address bus connection ON = active OFF = non-active |
| Rated operating voltage: | 20 ... 30 V DC , ripple 10 %SS , PELV |
| Power consumption: | max. 4 W with read/write head IPT*-FP |
| Galvanic isolation: Operating voltage/interface: | functional insulation acc. to DIN EN 50178, rated insulation voltage 50 Veff |
| Physical: | RS-485, addressable , up to 30 bases , address 1 ... 30 |
| Protocol: | ASCII |
| Transfer rate: | 1200; 2400; 4800; 9600; 19200; 38400 Bit/s |
| Cable length: | ≤ 1200 m |
| Ambient temperature: | -25 ... 70 °C (-13 ... 158 °F) |
| Storage temperature: | -40 ... 85 °C (-40 ... 185 °F) |
| Degree of protection: | IP67 according to EN 60529 with IPT*-FP |
| Connection: | screw terminals |
| Interface cable: | 2 conductor, acc. to RS-485 |
| Supply: | up to 3 x 1.5 mm2 |
| Material: Housing: | diecast aluminum |
Логистические характеристики
| ТН ВЭД: | |
| Страна происхождения: | DE |
| EAN: | |
| Вес: | 0,00 kg |
| Длина: | 0,00 m |
| Ширина: | 0,00 m |
| Высота: | 0,00 m |