Pepperl+Fuchs 017588

NJ50-FP-E-P1

Inductive sensor

По запросу. Пожалуйста, отправьте нам письмо, чтобы узнать цену и наличие.
"ucnguBrctvdgcxgt0eqo"

Описание

Series: Rectangular type, Housing material: PBT, Output type: 3-wire, Installation: non-flush, Type of voltage: DC, Connection type: screw terminals, Degree of protection: IP67fa

Технические характеристики

Switching function: Normally open (NO)
Output type: NPN
Rated operating distance: 50 mm
Installation: non-flush
Output polarity: DC
Assured operating distance: 0 ... 40.5 mm
Reduction factor rAl: 0.4
Reduction factor rCu: 0.3
Reduction factor r304: 0.85
Output type: 3-wire
Operating voltage: 10 ... 30 V
Switching frequency: 0 ... 100 Hz
Hysteresis: typ. 3 %
Reverse polarity protection: reverse polarity protected
Short-circuit protection: pulsing
Voltage drop: ≤ 3 V
Operating current: 0 ... 200 mA
Off-state current: 0 ... 0.5 mA typ. 0.1 µA at 25 °C
No-load supply current: ≤ 20 mA
Time delay before availability: ≤ 30 ms
Operating voltage indicator: LED, green
Switching state indicator: LED, yellow
Standard conformity: Standards: EN 60947-5-2:2007 EN 60947-5-2/A1:2012 IEC 60947-5-2:2007 IEC 60947-5-2 AMD 1:2012
UL approval: cULus Listed, General Purpose
CSA approval: cCSAus Listed, General Purpose
Ambient temperature: -25 ... 70 °C (-13 ... 158 °F)
Connection type: screw terminals
Information for connection: A maximum of two conductors with the same core cross section may be mounted on one terminal connection! tightening torque 1.2 Nm + 10 %
Core cross-section: up to 2.5 mm2
Standard conformity: Minimum core cross-section: without wire end ferrule 0.5 mm2 , with connector sleeves 0.34 mm2
Standard conformity: Maximum core cross-section: without wire end ferrule 2.5 mm2 , with connector sleeves 1.5 mm2
Housing material: PBT
Sensing face: PBT
Housing base: PBT
Degree of protection: IP67

Логистические характеристики

ТН ВЭД:
Страна происхождения: ID
EAN:
Вес: 0,00 kg
Длина: 0,00 m
Ширина: 0,00 m
Высота: 0,00 m