Article image EL2722

Beckhoff EL2722

EL2722 | 2-channel triac output terminal

По запросу. Пожалуйста, отправьте нам письмо, чтобы узнать цену и наличие.
"ucnguBrctvdgcxgt0eqo"

Описание

The EL2722 output terminal uses a power switch to control mains voltage from 12 V to 230 V AC. The switching element is a triac, which is connected to the power contact potential. As a semiconductor switch, it is not subject to wear. The steady load capacity of a digital output is 1 A. The EtherCAT Terminal has two independent outputs and indicates its signal state by means of light emitting diodes. The EL2722 has two mutually locked outputs and is very suitable for turning motors (blinds).

Технические характеристики

Connection technology: triac output, 2-wire
Number of outputs: 2 x make contacts, mutually locked
Rated load voltage: 12…230 V AC
Load type: ohmic, inductive
Distributed clocks:
Max. output current: 1 A (0.5 A if both outputs are on)
Switching times: in zero crossing, 0.1…10 ms
Frequency range: 47…63 Hz
Surge voltage protection: > 275 V
Peak current: 40 A (16 ms), 1.5 A (30 s)
Standby current: 0.6 mA
Leakage current (OFF state): typ. 0.8 mA, max. 1.5 mA
Switch-on time: 0.1…10 ms, zero crossing
Switch-off time: T/2
Max. residual voltage: 1.5 V (60 mA…1 A), 150 Ω (< 60 mA)
Current consumption E-bus: typ. 120 mA
Electrical isolation: 500 V (E-bus/field voltage), 3750 V AC (1 min.)
Current consumption power contacts:
Bit width in the process image: 2 outputs
Configuration: no address or configuration setting
Special features: suitable for conventional blind motors
Weight: approx. 55 g
Operating/storage temperature: 0…+55 °C/-25…+85 °C
Relative humidity: 95 %, no condensation
Vibration/shock resistance: conforms to EN 60068-2-6/EN 60068-2-27
EMC immunity/emission: conforms to EN 61000-6-2/EN 61000-6-4
Protect. class/installation pos.: IP 20/variable
Pluggable wiring: for all ESxxxx terminals

Логистические характеристики

ТН ВЭД:
Страна происхождения:
EAN:
Вес: 0,00 kg
Длина: 0,00 m
Ширина: 0,00 m
Высота: 0,00 m