1406230000
PSSR 1PH CONTROL UNIT
| Type: | PSSR 1PH CONTROL UNIT |
| Order No.: | 1406230000 |
| Version: | Power Solid-State Relais, Current monitoring, Screw connection |
| GTIN (EAN): | 4050118206739 |
| Qty.: | 1 pc(s). |
| Width: | 25 mm |
| Width (inches): | 0.984 inch |
| Height: | 112.3 mm |
| Height (inches): | 4.421 inch |
| Depth: | 65 mm |
| Depth (inches): | 2.559 inch |
| Net weight: | 85 g |
| Humidity: | 40...85 % (indoor) no condensation |
| Operating temperature, max.: | 80 °C |
| Operating temperature, min.: | -40 °C |
| Storage temperature, max.: | 125 °C |
| Storage temperature, min.: | -40 °C |
| Operating temperature: | -40 °C...80 °C |
| Storage temperature: | -40 °C...125 °C |
| REACH SVHC: | Lead 7439-92-1 |
| Voltage supply: | 8…30 V DC |
| Current consumption: | ≤ 20 mA (feedback output unloaded), ≤ 120 mA (switched feedback output max. loaded) |
| Protective circuit: | Varistor, Reverse polarity protection |
| Rated control voltage (control input): | 4…30 V DC |
| Nominal control current (control input): | ≤ 2.5 mA |
| Rated control voltage (external teach input): | 4…30 V DC |
| Nominal control current (external teach input): | ≤ 2.5 mA |
| Cut-in / dropout voltage: | 2 V DC |
| Nominal switching voltage: | 8...30 V DC |
| Solid-state type: | Transistor |
| Switch-on delay: | ≤ 15 ms |
| Switch-off delay: | ≤ 16 ms |
| Solid-state type: | MOS-FET |
| Nominal switching voltage: | 8...30 V DC |
| Continuous current: | 0.1 A |
| Switch-on delay: | ≤ 100 ms |
| Switch-off delay: | ≤ 100 ms |
| Leakage current in PSSR output, max.: | 0.3 A |
| Current measurement range AC, min.: | 2 A |
| Current measurement range AC, max.: | 40 A |
| Current sensor hole diameter: | 9 mm |
| Colour: | black |
| Pollution severity: | 2 |
| Surge voltage category: | III |
| Protection degree: | IP20 |
| Standards: | EN 60947-4-3, EN 60950 |
| Wire connection method: | Screw connection |
| Tightening torque, min.: | 0.4 Nm |
| Tightening torque, max.: | 0.5 Nm |
| Clamping range, rated connection: | 1.5 mm² |
| Clamping range, min.: | 0.15 mm² |
| Clamping range, max.: | 2.5 mm² |
| Wire connection cross-section, finely stranded, min.: | 0.2 mm² |
| Wire connection cross section, finely stranded, max.: | 1.5 mm² |
| Wire cross-section, finely stranded, min. (AWG): | AWG 26 |
| Wire cross-section, finely stranded, max. (AWG): | AWG 12 |
| Conductor cross-section, flexible, AEH (DIN 46228-1), min.: | 0.2 mm² |
| Conductor cross-section, flexible, AEH (DIN 46228-1), max.: | 1.5 mm² |
| Blade size: | 0.6 x 3.5 mm |
| ETIM 6.0: | EC001440 |
| ETIM 7.0: | EC001440 |
| eClass 9.0: | 27-37-18-02 |
| eClass 9.1: | 27-37-18-02 |
| eClass 10.0: | 27-37-18-02 |
| ROHS: | Conform |
| Type: | PSSR 1PH CONTROL UNIT |
| Order No.: | 1406230000 |
| Version: | Power Solid-State Relais, Current monitoring, Screw connection |
| GTIN (EAN): | 4050118206739 |
| Qty.: | 1 pc(s). |
| Width: | 25 mm |
| Width (inches): | 0.984 inch |
| Height: | 112.3 mm |
| Height (inches): | 4.421 inch |
| Depth: | 65 mm |
| Depth (inches): | 2.559 inch |
| Net weight: | 85 g |
| Humidity: | 40...85 % (indoor) no condensation |
| Operating temperature, max.: | 80 °C |
| Operating temperature, min.: | -40 °C |
| Storage temperature, max.: | 125 °C |
| Storage temperature, min.: | -40 °C |
| Operating temperature: | -40 °C...80 °C |
| Storage temperature: | -40 °C...125 °C |
| REACH SVHC: | Lead 7439-92-1 |
| Voltage supply: | 8…30 V DC |
| Current consumption: | ≤ 20 mA (feedback output unloaded), ≤ 120 mA (switched feedback output max. loaded) |
| Protective circuit: | Varistor, Reverse polarity protection |
| Rated control voltage (control input): | 4…30 V DC |
| Nominal control current (control input): | ≤ 2.5 mA |
| Rated control voltage (external teach input): | 4…30 V DC |
| Nominal control current (external teach input): | ≤ 2.5 mA |
| Cut-in / dropout voltage: | 2 V DC |
| Nominal switching voltage: | 8...30 V DC |
| Solid-state type: | Transistor |
| Switch-on delay: | ≤ 15 ms |
| Switch-off delay: | ≤ 16 ms |
| Solid-state type: | MOS-FET |
| Nominal switching voltage: | 8...30 V DC |
| Continuous current: | 0.1 A |
| Switch-on delay: | ≤ 100 ms |
| Switch-off delay: | ≤ 100 ms |
| Leakage current in PSSR output, max.: | 0.3 A |
| Current measurement range AC, min.: | 2 A |
| Current measurement range AC, max.: | 40 A |
| Current sensor hole diameter: | 9 mm |
| Colour: | black |
| Pollution severity: | 2 |
| Surge voltage category: | III |
| Protection degree: | IP20 |
| Standards: | EN 60947-4-3, EN 60950 |
| Wire connection method: | Screw connection |
| Tightening torque, min.: | 0.4 Nm |
| Tightening torque, max.: | 0.5 Nm |
| Clamping range, rated connection: | 1.5 mm² |
| Clamping range, min.: | 0.15 mm² |
| Clamping range, max.: | 2.5 mm² |
| Wire connection cross-section, finely stranded, min.: | 0.2 mm² |
| Wire connection cross section, finely stranded, max.: | 1.5 mm² |
| Wire cross-section, finely stranded, min. (AWG): | AWG 26 |
| Wire cross-section, finely stranded, max. (AWG): | AWG 12 |
| Conductor cross-section, flexible, AEH (DIN 46228-1), min.: | 0.2 mm² |
| Conductor cross-section, flexible, AEH (DIN 46228-1), max.: | 1.5 mm² |
| Blade size: | 0.6 x 3.5 mm |
| ETIM 6.0: | EC001440 |
| ETIM 7.0: | EC001440 |
| eClass 9.0: | 27-37-18-02 |
| eClass 9.1: | 27-37-18-02 |
| eClass 10.0: | 27-37-18-02 |
| ROHS: | Conform |
| ECCN: | |
| Kraj pochodzenia: | |
| EAN: | |
| Waga: | 0,09 kg |
| Długość: | 0,00 m |
| Szerokość: | 0,00 m |
| Wysokość: | 0,00 m |