1129090000
RSM-32 PLC C SW 1CO Z
Type: | RSM-32 PLC C SW 1CO Z |
Order No.: | 1129090000 |
Version: | Interface, RSM PLC, 32 with switch, RSS, Tension-clamp connection |
GTIN (EAN): | 4032248910489 |
Qty.: | 1 pc(s). |
Length: | 255 mm |
Length (inches): | 10.039 inch |
Width: | 109 |
Width (inches): | 4.291 inch |
Height: | 85 mm |
Height (inches): | 3.346 inch |
Net weight: | 1,373.983 g |
Operating temperature, max.: | 50 °C |
Operating temperature, min.: | -25 °C |
Storage temperature, max.: | 60 °C |
Storage temperature, min.: | -40 °C |
Operating temperature: | -25...50 °C |
Storage temperature: | -40...60 °C |
LED status display per relay: | green |
Fuse per relay: | No |
Switch: | Yes (coil side) |
LED status of the supply voltage: | yellow |
Power supply fuse: | No |
Connection on control side: | Plug-in connector in acc. with IEC60603-13 / DIN41651 |
Number of poles (control side): | 40-pole plug |
Connection (field side): | LM3NZF 5.08mm |
Connection supply: | LMNZF 5.08mm |
Input voltage: | 24 V DC ± 10% |
Input current: | 13 mA |
Power rating: | 0.36 W |
Relay type: | RSS |
Type of output: | Potential-free contact |
Contact material: | AgNi 90/10 |
Rated voltage (text): | 250 V AC |
Max. AC continuous current: | 2.5 A |
Minimum contact current: | 0.1 A |
Minimum contact voltage: | 5 V |
According to: | DIN EN 50178 |
Rated input insulation voltage: | < 50 V AC |
Rated output insulation voltage: | 250 V AC |
Overvoltage category input/output: | III |
Overvoltage category input/input: | II |
Overvoltage category output/output: | II |
Pollution severity level: | 2 |
Pulse voltage test (1,2/50μs): | 6 kV |
Insulation test voltage: | 1.2 kVAC |
Clearance input/output: | ≥ 5.5 mm |
Clearance input/input: | ≥ 0.2 mm |
Clearance output/output: | ≥ 1.17 mm |
Type of connection: | Tension-clamp connection |
Clamping range, min.: | 0.13 mm² |
Clamping range, max.: | 2.5 mm² |
Solid, min. H05(07) V-U: | 0.2 mm² |
Solid, max. H05(07) V-U: | 2.5 mm² |
Flexible, min. H05(07) V-K: | 0.2 mm² |
Flexible, max. H05(07) V-K: | 1.5 mm² |
Flexible with sleeve, max.: | 1.5 mm² |
Flexible with sleeve, min.: | 0.25 mm² |
Sleeve with plastic collar, max.: | 1.5 mm² |
Min. wire cross-section, AWG: | AWG 24 |
Max. wire cross-section, AWG: | AWG 14 |
Stripping length: | 7.5 mm |
Type of connection: | Tension-clamp connection |
Clamping range, min.: | 0.13 mm² |
Clamping range, max.: | 2.5 mm² |
Solid, min. H05(07) V-U: | 0.13 mm² |
Solid, max. H05(07) V-U: | 2.5 mm² |
Flexible, min. H05(07) V-K: | 0.13 mm² |
Flexible, max. H05(07) V-K: | 2.5 mm² |
Flexible with sleeve, max.: | 1.5 mm² |
Flexible with sleeve, min.: | 0.25 mm² |
Ferrule with plastic collar, max.: | 1.5 mm² |
Wire cross-section, min. AWG: | AWG 26 |
Wire cross-section, max. AWG: | AWG 14 |
Stripping length: | 6 mm |
ETIM 6.0: | EC002780 |
ETIM 7.0: | EC002780 |
eClass 9.0: | 27-14-11-52 |
eClass 9.1: | 27-24-22-16 |
eClass 10.0: | 27-14-11-52 |
ROHS: | Conform |
Type: | RSM-32 PLC C SW 1CO Z |
Order No.: | 1129090000 |
Version: | Interface, RSM PLC, 32 with switch, RSS, Tension-clamp connection |
GTIN (EAN): | 4032248910489 |
Qty.: | 1 pc(s). |
Length: | 255 mm |
Length (inches): | 10.039 inch |
Width: | 109 |
Width (inches): | 4.291 inch |
Height: | 85 mm |
Height (inches): | 3.346 inch |
Net weight: | 1,373.983 g |
Operating temperature, max.: | 50 °C |
Operating temperature, min.: | -25 °C |
Storage temperature, max.: | 60 °C |
Storage temperature, min.: | -40 °C |
Operating temperature: | -25...50 °C |
Storage temperature: | -40...60 °C |
LED status display per relay: | green |
Fuse per relay: | No |
Switch: | Yes (coil side) |
LED status of the supply voltage: | yellow |
Power supply fuse: | No |
Connection on control side: | Plug-in connector in acc. with IEC60603-13 / DIN41651 |
Number of poles (control side): | 40-pole plug |
Connection (field side): | LM3NZF 5.08mm |
Connection supply: | LMNZF 5.08mm |
Input voltage: | 24 V DC ± 10% |
Input current: | 13 mA |
Power rating: | 0.36 W |
Relay type: | RSS |
Type of output: | Potential-free contact |
Contact material: | AgNi 90/10 |
Rated voltage (text): | 250 V AC |
Max. AC continuous current: | 2.5 A |
Minimum contact current: | 0.1 A |
Minimum contact voltage: | 5 V |
According to: | DIN EN 50178 |
Rated input insulation voltage: | < 50 V AC |
Rated output insulation voltage: | 250 V AC |
Overvoltage category input/output: | III |
Overvoltage category input/input: | II |
Overvoltage category output/output: | II |
Pollution severity level: | 2 |
Pulse voltage test (1,2/50μs): | 6 kV |
Insulation test voltage: | 1.2 kVAC |
Clearance input/output: | ≥ 5.5 mm |
Clearance input/input: | ≥ 0.2 mm |
Clearance output/output: | ≥ 1.17 mm |
Type of connection: | Tension-clamp connection |
Clamping range, min.: | 0.13 mm² |
Clamping range, max.: | 2.5 mm² |
Solid, min. H05(07) V-U: | 0.2 mm² |
Solid, max. H05(07) V-U: | 2.5 mm² |
Flexible, min. H05(07) V-K: | 0.2 mm² |
Flexible, max. H05(07) V-K: | 1.5 mm² |
Flexible with sleeve, max.: | 1.5 mm² |
Flexible with sleeve, min.: | 0.25 mm² |
Sleeve with plastic collar, max.: | 1.5 mm² |
Min. wire cross-section, AWG: | AWG 24 |
Max. wire cross-section, AWG: | AWG 14 |
Stripping length: | 7.5 mm |
Type of connection: | Tension-clamp connection |
Clamping range, min.: | 0.13 mm² |
Clamping range, max.: | 2.5 mm² |
Solid, min. H05(07) V-U: | 0.13 mm² |
Solid, max. H05(07) V-U: | 2.5 mm² |
Flexible, min. H05(07) V-K: | 0.13 mm² |
Flexible, max. H05(07) V-K: | 2.5 mm² |
Flexible with sleeve, max.: | 1.5 mm² |
Flexible with sleeve, min.: | 0.25 mm² |
Ferrule with plastic collar, max.: | 1.5 mm² |
Wire cross-section, min. AWG: | AWG 26 |
Wire cross-section, max. AWG: | AWG 14 |
Stripping length: | 6 mm |
ETIM 6.0: | EC002780 |
ETIM 7.0: | EC002780 |
eClass 9.0: | 27-14-11-52 |
eClass 9.1: | 27-24-22-16 |
eClass 10.0: | 27-14-11-52 |
ROHS: | Conform |
ECCN: | |
Kraj pochodzenia: | |
EAN: | |
Waga: | 1,218 kg |
Długość: | 0,00 m |
Szerokość: | 0,00 m |
Wysokość: | 0,00 m |