Pepperl+Fuchs 281885

VBG-EC-K30-DMD-S32-EV

AS-Interface Gateway/Safety Monitor

Opis

EtherCat gateway with integrated safety monitor, double master for 2 AS-Interface networks, power supply input with decoupling coilsfa. The VBG-EC-K30-DMD-S32-EV is a EtherCAT gateway with a safety monitor and a double master according to AS-Interface specification 3.0. The device is a gateway with full functionality combined with a safety monitor. The gateway connects an AS-Interface system to a higher-level EtherCAT protocol. It acts as a master for the AS-Interface segment and as a slave for Ethernet / Modbus. During cyclic data exchange, the digital data of an AS-Interface segment is transferred. Analog values as well as the complete command set of the new AS-Interface specification are transferred via EtherCAT using a command interface. The gateway has 6 inputs and outputs. The 6 inputs are used for enhanced device monitoring EDM or start inputs. The 6 outputs switch channel 1 and 2 as semiconductor outputs. The K30 design is particularly suitable for use in control cabinets. Configuration of the device can be performed using switches. Seven LED located on the front panel indicate the current status of the AS-Interface segment. One LED shows the power supply via AUX. A further eight LEDs indicate the status of the inputs and outputs. With the graphical display, the commissioning of the AS-Interface circuits and testing of the connected peripherals can take place completely separately from the commissioning of the higher-level network and the programming. With the 4 switches, all functions can be controlled and visualized on the display. An RJ-45 Ethernet port provides a way of exporting data relating to the gateway, network and operation directly from the gateway for extended local diagnosis purposes. Via the RJ-45 Ethernet diagnostic interface, up to 31 devices can establish a secure cross-communication. The integrated data decoupling allows to operate 2 AS-Interface circuits with just a standard power supply. The device has a card slot for a memory card for the storage of configuration data. The device can be operated with a 24 V power supply according to PELV.