Pepperl+Fuchs 287957

VBG-CCL-K30-D-S32-EV

AS-Interface Gateway/Safety Monitor

Bajo pedido. Envíenos un correo electrónico para consultar el precio y la disponibilidad.
"ucnguBrctvdgcxgt0eqo"

Descripción

CC-Link gateway with integrated safety monitor, power supply input with decoupling coilsfa

Parámetros técnicos

AS-Interface specification: V3.0
PLC-Functionality: activateable
Duplicate address detection: from AS-Interface slaves
Earth fault detection: integrated
EMC monitoring: integrated
Diagnostics function: Extended function via display
Data decoupling: integrated
Switch-on delay: < 10 s
Response delay: < 40 ms
UL File Number: E223772 only from low voltage, limited energy source (SELV or PELV) or listed Class 2 source
Safety Integrity Level (SIL): SIL 3
Performance level (PL): PL e
MTTFd: 100 a
B10d: 2.5 E+5
Display: Illuminated graphical LC display for addressing and error messages
LED AS-i ACTIVE: AS-Interface operation normal; LED green
LED CONFIG ERR: configuration error; LED red
LED PRG ENABLE: autom. programming; LED green
LED POWER: voltage ON; LED green
LED PRJ MODE: projecting mode active; LED yellow
LED U AS-i: AS-Interface voltage; LED green
LED AUX: ext. auxiliary voltage UAUX ; LED green
LED IN: 6 x LED green
LED OUT: Output circuit closed; 6 x green LEDs
LED CC-Link: CC link in operation; LED green CC Link error; LED red
Button: 4
Switch SET: Selection and setting of a slave address
OK button: Mode selection traditional-graphical/confirmation
Button MODE: Mode selection PRJ-operation/save configuration/cursor
ESC button: Mode selection traditional-graphical/cancel
Insulation voltage: ≥ 500 V
Rated operating voltage: 26.5 ... 31.6 V from AS-Interface; 24 V DC
Rated operating current: approx. 300 mA PELV
Interface type: Remote device, 2 – 4 occupied stations (depending on operating mode)
Physical: Screw terminal block, pluggable
Protocol: according to CC-Link specification
Transfer rate: 156 Bit/s up to 10 MBit/s
Interface type: RJ-45 Ethernet Diagnostic Interface
Transfer rate: 10 MBit/s
Interface type: Chip card slot
Number/Type: 6 inputs Safety: 3 x 2 channels Or 6 standard inputs
Supply: from AUX
Switching threshold: Static: 4 mA at 24 V. Dynamic: 15 mA at 24 V (T=100 µs)
Safety output: 6 semiconductor outputs Output circuits: 6 PNP transistor outputs Max. contact load: 1.2 ADC-13 at 30 VDC, Σ = 7.2 A in total (see derating)
Supply: from AUX
AS-Interface: spring terminals, removable
CC Link: 5-pin screw terminal
Electromagnetic compatibility: Directive 2014/30/EU: EN 62026-2:2013 EN 61000-6-2/AC:2005, EN 61000-6-4:2007+A1:2011
Machinery Directive: Directive 2006/42/EC: EN 61508:2010 EN ISO 13849-1/AC:2009 EN 62061:2005+A1:2013
Degree of protection: EN 60529:2000
Emitted interference: EN 61000-6-4:2007/A1:2011
AS-Interface: EN 62026-2:2013
Noise immunity: EN 61000-6-2/AC:2005
Shock resistance: EN 61131-2:2004
Functional safety: EN ISO 13849-1:2008/AC:2009, EN ISO 13849-2:2012 (up to PL e), EN 61508:2010 and EN 62061:2005+A1:2013 (up to SIL3)
UL approval: An isolated source with a secondary open circuit voltage of ≤ 30 VDC with a 3 A maximum over current protection. Over current protection is not required when a Class 2 source is employed. UL mark does not provide UL certification for any functional safety rating or aspects of the device.
Ambient temperature: 0 ... 55 °C (32 ... 131 °F)
Storage temperature: -25 ... 85 °C (-13 ... 185 °F)
Degree of protection: IP20
Material: Housing: Stainless steel
Mass: 800 g
Construction type: Low profile housing

Parámetros logísticos

ECCN:
País de origen: DE
EAN:
Peso: 0,10 kg
Longitud: 0,00 m
Anchura: 0,00 m
Altura: 0,00 m