View this page in: English
Email: "ucnguBrctvdgcxgt0eqo"
Seleccione el idioma
Solicitud con 1 clic
Producto
Pepperl+Fuchs
242031
KFD0-SD2-Ex1.1045
Solicitar una oferta
Pepperl+Fuchs 242031
KFD0-SD2-Ex1.1045
Amplificador Separador para electroválvula
Bajo pedido. Envíenos un correo electrónico para consultar el precio y la disponibilidad.
"ucnguBrctvdgcxgt0eqo"
Descripción
Barrera aislada de 1 canal, Alimentación de 24 V CC (mediante lazo), Límite de corriente 45 mA a 10 V CC, Hasta SIL 3 según IEC 61508pa
Parámetros técnicos
| Signal type: | Digital Output |
| Safety Integrity Level (SIL): | SIL 3 |
| Rated voltage: | loop powered |
| Power dissipation: | < 1.05 W (≤ 30 V) |
| Connection side: | control side |
| Connection: | terminals 7, 8 |
| Rated voltage: | 20 ... 35 V DC |
| Current: | 72 mA at 20 V input voltage, load = 220 Ω 50 mA at 35 V input voltage, load = 220 Ω |
| Inrush current: | ≤ 200 mA after 100 µs |
| Connection side: | field side |
| Connection: | terminals 1+, 2- |
| Internal resistor: | max. 282 Ω |
| Current: | ≤ 45 mA |
| Voltage: | ≥ 10 V |
| Open loop voltage: | min. 22.7 V |
| Output rated operating current: | 45 mA |
| Output signal: | These values are valid for the rated operating voltage 20 ... 35 V DC. |
| Energized/De-energized delay: | single operation: typ. 1.7 ms/50 µs; periodical: typ. 5 µs/50 µs |
| Display elements: | LED |
| Labeling: | space for labeling at the front |
| Electromagnetic compatibility: Directive 2014/30/EU: | EN 61326-1:2013 (industrial locations) |
| Electromagnetic compatibility: | NE 21:2006 |
| Degree of protection: | IEC 60529:2001 |
| Protection against electrical shock: | UL 61010-1:2004 |
| Ambient temperature: | -20 ... 60 °C (-4 ... 140 °F) |
| Degree of protection: | IP20 |
| Connection: | screw terminals |
| Mass: | approx. 100 g |
| Dimensions: | 20 x 107 x 115 mm (0.8 x 4.2 x 4.5 inch) , housing type B1 |
| Mounting: | on 35 mm DIN mounting rail acc. to EN 60715:2001 |
| EU-type examination certificate: | BASEEFA 06 ATEX 0252 |
| Electromagnetic compatibility: Marking: | II (1)G [Ex ia Ga] IIC, II (1)D [Ex ia Da] IIIC, I (M1) [Ex ia Ma] I (-20 °C ≤ Tamb ≤ 60 °C) |
| Electromagnetic compatibility: Voltage: | 25.2 V |
| Electromagnetic compatibility: Current: | 93 mA |
| Electromagnetic compatibility: Power: | 590 mW |
| Input: Maximum safe voltage: | 250 V (Attention! The rated voltage can be lower.) |
| Certificate: | TÜV 99 ATEX 1499 X |
| Input: Marking: | II 3G Ex nA II T4 [device in zone 2] |
| Galvanic isolation: Input/Output: | safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V |
| Directive conformity: Directive 2014/34/EU: | EN 60079-0:2012+A11:2013 , EN 60079-11:2012 , EN 60079-15:2010 |
| FM approval: Control drawing: | 116-0309 |
| UL approval: Control drawing: | 116-0316 (cULus) |
| IECEx approval: IECEx certificate: | IECEx BAS 06.0058 IECEx CML 19.0093X |
| IECEx approval: IECEx marking: | [Ex ia Ga] IIC , [Ex ia Da] IIIC , [Ex ia Ma] I Ex ec IIC T4 Gc |
| Supplementary information: | Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com. |
Parámetros logísticos
| ECCN: | |
| País de origen: | SG |
| EAN: | |
| Peso: | 0,00 kg |
| Longitud: | 0,00 m |
| Anchura: | 0,00 m |
| Altura: | 0,00 m |