View this page in: English
Email: "ucnguBrctvdgcxgt0eqo"
Seleccione el idioma
Solicitud con 1 clic
Producto
Pepperl+Fuchs
111255
VAA-1E3A-M18-ZE/E2-V1 ASI-Mo
Solicitar una oferta
Pepperl+Fuchs 111255
VAA-1E3A-M18-ZE/E2-V1 ASI-Mo
AS-Interface sensor/actuator module
Bajo pedido. Envíenos un correo electrónico para consultar el precio y la disponibilidad.
"ucnguBrctvdgcxgt0eqo"
Descripción
AS-Interface module in M18 stainless steel head ferrule. 1 input/3 outputsfa
Parámetros técnicos
| Slave type: | Standard slave |
| MTTFd: | 350 a at 30 °C |
| LED FAULT: | communication error / address is 0; LED red |
| LED PWR: | AS-Interface voltage; LED green |
| Auxiliary voltage (output): | 24 V DC ± 15 % PELV (protection class 3 according to VDE 0106/IEC 364-4-41) |
| Rated operating voltage: | 26.5 ... 31.6 V from AS-Interface |
| Rated operating current: | ≤ 20 mA |
| Number/Type: | 1 Input for 2-wire sensor |
| Supply: | from external auxiliary voltage UAUX |
| Switching point: | OFF ≤ 0.8 mA ON ≥ 5 mA |
| Number/Type: | 3 electronic outputs, PNP |
| Supply: | from external auxiliary voltage UAUX |
| Current: | 20 mA per output |
| Electromagnetic compatibility: Directive 2014/30/EU: | EN 62026-2:2013 |
| Degree of protection: | EN 60529:2000 |
| AS-Interface: | EN 62026-2:2013 |
| Profile: | S-9.F |
| IO code: | 9 |
| ID code: | F |
| ID2 code: | 0 |
| Data bits (function via AS-Interface): | input output |
| Electromagnetic compatibility: D0: | - OUT1 |
| Electromagnetic compatibility: D1: | - OUT2 |
| Electromagnetic compatibility: D2: | - OUT3 |
| Electromagnetic compatibility: D3: | IN1 - |
| Parameter bits (programmable via AS-i): | function |
| Electromagnetic compatibility: P0: | not used |
| Electromagnetic compatibility: P1: | not used |
| Electromagnetic compatibility: P2: | not used |
| Electromagnetic compatibility: P3: | not used |
| Ambient temperature: | 0 ... 70 °C (32 ... 158 °F) |
| Storage temperature: | -40 ... 70 °C (-40 ... 158 °F) |
| Degree of protection: | IP67 according to EN 60529 The protection class appplies only for installation of the module in a connection housing for parts of the module located outside of the connection housing (external M12 connection, inside cable connection). The housing duct must be sealed with a suitable adhesive. |
| Connection: | AS-Interface and auxiliary voltage: M12x1 round connector auxiliary voltage, input and outputs: 20 cm connection cable |
| Mass: | 110 g |
Parámetros logísticos
| ECCN: | |
| País de origen: | Deutschland |
| EAN: | 4050143010110 |
| Peso: | 0,08 kg |
| Longitud: | 0,00 m |
| Anchura: | 0,00 m |
| Altura: | 0,00 m |