Article image EQ3204-0002

Beckhoff EQ3204-0002

EQ3204-0002 | 4-channel analog input PT100 (RTD)

Bajo pedido. Envíenos un correo electrónico para consultar el precio y la disponibilidad.
"ucnguBrctvdgcxgt0eqo"

Descripción

The EQ3204 EtherCAT Box with analog inputs allows resistance sensors to be connected directly. The module’s circuitry can operate the sensors using 2-, 3- or 4-wire connection techniques. Linearisation over the full temperature range is realised with the aid of a microprocessor. The temperature range can be selected freely. The module can also be used for simple resistance measurement with the output in ohms. The module’s standard settings are: resolution 0.1°C in the temperature range of PT100 sensors in 2-wire connection. Sensor malfunctions such as broken wires are indicated by error LEDs. The module is quite versatile, but the default values are selected in such a way that in most cases it is not necessary to perform configuration. The input filter and associated conversion times can be set within a wide range; several data output formats may be chosen. If required, the inputs can be scaled differently. Automatic limit monitoring is also available. Parameterisation is carried out via EtherCAT.

Parámetros técnicos

Number of inputs: 4
Housing width: 39 mm
Input connections: M12, screw type
Connection method: screw type M12 for 2-, 3- and 4-wire connections, presetting: 2-wire
Protocol: EtherCAT
Bus interface: 2 x M8 socket, shielded, screw type
Sensor types: PT100, PT200, PT500, PT1000, Ni100, Ni120, Ni1000 resistance measurement (e.g. potentiometer, 10 Ω…1.2/4 kΩ)
Signal type: PT100
Measuring range: -200…+850 °C (PT sensors); -60…+250 °C (Ni sensors)
Resolution: 0.1 °C per digit
Measuring error: < ±0.5 °C for PT sensors (further types see documentation)
Conversion time: 800 ms up to 2 ms, see documentation, default: approx. 85 ms
Nominal voltage: 24 V DC (-15 %/+20 %)
Distributed clocks:
Measuring current: typ. 0.5 mA
Input filter: 5 variations, configurable
Current consumption from US: 120 mA
Power supply connection: feed: 1 x M8 male socket, 4-pin; downstream connection: 1 x M8 female socket, 4-pin
Bit width in the process image: 4 x 32 bit RTD input
Electrical isolation: 500 V
Special features: stainless steel, Hygienic Design
Dimensions (W x H x D): 39 mm x 160 mm x 43 mm
Operating/storage temperature: -25…+60 °C/-40…+85 °C
Vibration/shock resistance: conforms to EN 60068-2-6/EN 60068-2-27
EMC immunity/emission: conforms to EN 61000-6-2/EN 61000-6-4
Protect. class/installation pos.: IP 69K (according to EN 60529)/variable
Approvals/markings: CE, UL

Parámetros logísticos

ECCN:
País de origen:
EAN:
Peso: 0,00 kg
Longitud: 0,00 m
Anchura: 0,00 m
Altura: 0,00 m