EP5001-0002
EP5001-0002 | SSI encoder interface
The EP5001 EtherCAT Box is an interface for the direct connection of SSI encoders with differential inputs (RS485).The interface circuit generates a pulse for reading the encoder and makes the incoming data stream available to the controller as a data word in the process image. Various operating modes, transmission frequencies and bit widths can be permanently stored in a control register. The encoder is connected via an 8-pin M12 socket.
Connection technology: | M12, screw type |
Number of channels: | 1 |
Connection encoder/sensor: | M12, screw type |
Encoder connection: | binary input: D+, D-, binary output: Cl+, Cl- |
Nominal voltage: | 24 V DC (-15 %/+20 %) |
Signal type: | differential (RS422) |
Distributed clocks: | yes |
Data transfer rates: | variable up to 1 MHz, 250 kHz default |
Serial input: | 24 bit width (variable) |
Data direction: | read |
Power supply connection: | feed: 1 x M8 male socket, 4-pin; downstream connection: 1 x M8 female socket, 4-pin |
Current consumption from US: | typ. 130 mA + sensor supply |
Bit width in the process image: | 1 x 32 bit input, 8 bit status |
Electrical isolation: | 500 V |
Special features: | adjustable baud rate, coding and data length |
Weight: | approx. 165 g |
Operating/storage temperature: | 0…+55 °C/-25…+85 °C |
Vibration/shock resistance: | conforms to EN 60068-2-6/EN 60068-2-27 |
EMC immunity/emission: | conforms to EN 61000-6-2/EN 61000-6-4 |
Protect. class/installation pos.: | IP 65/66/67 (conforms to EN 60529)/variable |
Approvals/markings: | CE |
ECCN: | |
País de origen: | |
EAN: | |
Peso: | 0,00 kg |
Longitud: | 0,00 m |
Anchura: | 0,00 m |
Altura: | 0,00 m |