103004370
RSS16-D-ST8H
Without latching. Series-wiring unlimited. Thermoplastic enclosure. Suitable for series-wiring. 1 x connector plug M12, 8-pole. Door stop with magnetic latching. 3 different directions of actuation. Universal coding with RFID technology. Connection terminal or plug connection. RFID-technology for needs-based protection against, tampering
| Produkt-Typbezeichnung: | RSS16-D-ST8H |
| Artikelnummer (Bestellnummer): | 103004370 |
| EAN (European Article Number): | 4030661456843 |
| Housing construction form: | Block |
| Zertifikate: | TÜV cULus EAC FCC IC |
| Produktname: | RSS16 |
| Vorschriften: | IEC 60947-5-3 |
| Codierung: | Universelle Codierung |
| Time to readiness, maximum: | 2,000 ms |
| Reaction time, maximum: | 100 ms |
| Gehäusebauform: | Quader |
| Diagnostic output: | Yes |
| Topologie des Senors: | Reihenschaltungsgerät |
| Short-circuit recognition: | Yes |
| Werkstoff der aktiven Flächen: | Kunststoff, glasfaserverstärkter Thermoplast |
| Bereitschaftsverzugszeit, maximum: | 2.000 ms |
| Reaktionszeit, maximum: | 100 ms |
| Integral System Diagnostics, status: | Yes |
| Diagnoseausgang: | Ja |
| Number of semi-conductor outputs with signaling function: | 1 |
| Number of fail-safe digital outputs: | 2 |
| Reihenschaltung: | Ja |
| Sicherheitsfunktionen: | Ja |
| PFH-value: | 6.30 x 10⁻¹¹ /h |
| Integrierte Anzeige, Status: | Ja |
| Anzahl der LEDs: | 2 |
| Anzahl der Halbleiter-Ausgänge mit Meldefunktion: | 1 |
| Active area: | lateral front side cover-side |
| Normen, Vorschriften: | ISO 13849-1 IEC 60947-5-3 EN 62061 IEC 61508 |
| Performance Level: | e |
| Ensured switch distance "ON" Sao: | 12 mm |
| Ensured switch distance "OFF" Sar: | 30 mm |
| Safety Integrity Level (SIL): | 3 |
| Gebrauchsdauer: | 20 Jahre |
| Betätigungsebene: | vorderseitig rückseitig kopfseitig |
| Aktive Fläche: | seitlich vorderseitig deckelseitig |
| Befestigung: | 2 x M5, Zylinderkopfschraube |
| Height of sensor: | 30 mm |
| Length of sensor: | 91 mm |
| Gesicherter Schaltabstand "AUS" Sar: | 30 mm |
| Hysterese (Schaltabstand), maximum: | 2 mm |
| Wiederholgenauigkeit R: | 0,5 mm |
| Anzugsdrehmoment der Muttern, maximum: | 2 Nm |
| Anschluss, Stecker: | Steckverbinder M12, 8-polig |
| Storage and transport temperature, maximum: | +85 °C |
| Höhe des Sensors: | 30 mm |
| Voltage type: | DC (direct current) |
| Breite des Sensors: | 52 mm |
| Rated operating voltage, minimum: | 20.4 VDC |
| Rated operating voltage, maximum: | 26.4 VDC |
| Operating current: | 2,100 mA |
| Lager- und Transporttemperatur, minimum: | -25 °C |
| Switching frequency, approx.: | 1 Hz |
| Rated operating current (safety outputs): | 1,000 mA |
| Output current, (fail-safe output), maximum: | 1 A |
| Bemessungsstoßspannungsfestigkeit: | 0,8 kV |
| Operating current (diagnostic output): | 50 mA |
| Note (LED switching conditions display): | Multi-coloured LED: Green, Red LED yellow: Operating condition LED green: Supply voltage LED red: Fault |
| Spannungsart: | DC (Gleichspannung) |
| Strom: | Leerlaufstrom I0, typ.: 0.1 A |
| Bemessungsbetriebsspannung, minimum: | 20.4 VDC |
| Bemessungsbetriebsspannung, maximum: | 26.4 VDC |
| Bemessungsbetriebsstrom: | 2.100 mA |
| Bedingter Bemessungskurzschlussstrom nach EN 60947-5-1: | 100 A |
| Schaltfrequenz, circa: | 1 Hz |
| Bemessungsbetriebsstrom: | 1.000 mA |
| Ausgangsstrom, maximum: | 1 A |
| Ausführung: | p-schaltend |
| Spannungsfall Ud, maximum: | 1 V |
| Reststrom: | 0,5 mA |
| Spannung, Gebrauchskategorie DC12: | 24 VDC |
| Strom, Gebrauchskategorie DC12: | 1 A |
| Spannung, Gebrauchskategorie DC13: | 24 VDC |
| Strom, Gebrauchskategorie DC13: | 1 A |
| Bemessungsbetriebsstrom (Diagnose-Ausgang): | 50 mA |
| Ausführung: | p-schaltend |
| Spannungsfall Ud, maximum: | 2 V |
| Spannung, Gebrauchskategorie DC12: | 24 VDC |
| Strom, Gebrauchskategorie DC12: | 0,05 A |
| Spannung, Gebrauchskategorie DC13: | 24 VDC |
| Strom, Gebrauchskategorie DC13: | 0,05 A |
| Störaussendung: | IEC 61000-6-4 |
| Störfestigkeit: | IEC 60947-3 |
| Hinweis (LED-Zustandsanzeige): | Mehrfarben-LED: Grün Rot gelbe LED: Betriebszustand grüne LED: Versorgungsspannung rote LED: Fehler |
| Lieferumfang: | Die Betätiger sind nicht im Lieferumfang enthalten. |
| Empfehlung (Betätiger): | RST16-1 RST-U-2 |
| Empfehlung Sicherheitsschaltgerät: | PROTECT PSC1 SRB-E-301ST SRB-E-201LC |
| ТН ВЭД: | |
| Страна происхождения: | DE |
| EAN: | |
| Вес: | 0,16 kg |
| Длина: | 0,00 m |
| Ширина: | 0,00 m |
| Высота: | 0,00 m |