View this page in: English
Email: "ucnguBrctvdgcxgt0eqo"
Выберите язык
Запрос цены в 1 клик
Продукт
Schmersal
101153920
SE-400 C AUSWERTEGERAET
Сделать запрос
Авторское право на изображение: Schmersal
Schmersal 101153920
SE-400 C AUSWERTEGERAET
По запросу. Пожалуйста, отправьте нам письмо, чтобы узнать цену и наличие.
"ucnguBrctvdgcxgt0eqo"
Описание
1 Signalling output. 2 safety contacts, STOP 0. To monitor 1 safety edge(s)
Технические характеристики
| Product type description: | SE-400C |
| Article number (order number): | 101153920 |
| EAN (European Article Number): | 4030661289175 |
| eCl@ss number, Version 9.0: | 27-37-18-19 |
| Certificates: | TÜV cULus EAC |
| Product name: | SE-400C |
| Standards: | ISO 13849-1 EN ISO 13850 |
| Climatic stress: | EN ISO 13856-2 |
| Enclosure material: | Plastic, PE (Black), Crastin (Grey) |
| Weight: | 184 g |
| Time to readiness, maximum: | 32 ms |
| Reaction time, maximum: | 32 ms |
| Stop-Category: | 0 |
| Electronic Fuse: | Yes |
| Wire breakage detection: | Yes |
| Short-circuit recognition: | Yes |
| Start input: | Yes |
| Feedback circuit: | Yes |
| Automatic reset function: | Yes |
| Reset edge detection: | Yes |
| Reset after disconnection of supply voltage: | Yes |
| Earth connection detection: | Yes |
| Integral System Diagnostics, status: | Yes |
| Number of LEDs: | 2 |
| Number of undelayed semi-conductor outputs with signaling function: | 1 |
| Number of safety contacts: | 2 |
| Number of signalling outputs: | 1 |
| Performance Level: | e |
| Control category to EN13849: | 4 |
| Control category to EN954: | 4 |
| PFH-value: | 2.47 x 10⁻⁸ /h |
| Note (PFH-value): | up to max. 50,000 switching cycles/year |
| Mission Time: | 20 Year(s) |
| Mounting: | Snaps onto standard DIN rail to EN 60715 |
| Mechanical life, minimum: | 30,000,000 Operations |
| Terminal Connector: | Screw connection |
| Length of cable: | 200 m |
| Cable section, maximum: | 2 x 1.5 mm² |
| Note (Cable section): | All indications about the cable section are including the conductor ferrules. |
| Width: | 22.5 mm |
| Height: | 100 mm |
| Depth: | 121 mm |
| Protection class of the enclosure: | IP40 |
| Protection class of the Clearance: | IP54 |
| Protection class of Clips or Terminals: | IP20 |
| Ambient temperature, minimum: | +5 °C |
| Ambient temperature, maximum: | +55 °C |
| Resistance to vibrations to EN 60068-2-6: | 10 … 55 Hz, amplitude 0.15 mm |
| Rated impulse withstand voltage: | 4 kV |
| Degree of pollution to VDE 0110: | 2 |
| Rated operating voltage: | 24 VDC +20% / -10% |
| Operating current: | 150 mA |
| Rated AC voltage for controls at DC minimum: | 21.6 VDC |
| Rated control voltage at DC, maximum: | 28.8 VDC |
| Utilisation category AC-15: | 230 VAC |
| Utilisation category AC-15: | 2 A |
| Utilisation category DC-13: | 24 VDC |
| Utilisation category DC-13: | 3 A |
| Electrical power consumption, maximum: | 4 W |
| Indicated operating states: | Safety edge function |
| Note (applications): | Safety edges |
| Note (General): | The overall machine safety depends on the professional mounting and installation of the safety monitoring module and the signal transmitter, as well as on the correct and professional electrical connection of the components. If there it any risk whatsoever, the machine may not be restarted. |
| Note (Wiring diagram): | A Start-Reset-Taster (S) can optionally be connected to the feedback circuit. Both re-initialisation and auto-reset must comply with the requirements of EN 1760-2 (diagram A2, A3). The wiring diagram is shown for the de-energised condition. Monitoring the safety edges SE 40 / SE 70 with a safety monitoring unit SE-400C up to PL e and Category 4. The feedback circuit monitors the position of the contactors KA and KB. |
| Hinweis (Allgemein): | Die Gesamtsicherheit der Maschine ist von der fachgerechten Montage und Installation von Sicherheitsbaustein und Signalgeber, sowie von der fachgerechten elektrischen Verbindung der Baugruppen abhängig. Bei bestehender Gefahr darf die Maschine nicht erneut gestartet werden. |
| Hinweis (Schaltungsbeispiel): | Ein Start-Reset-Taster (S) kann optional in den Rückführkreis eingebunden werden. Manueller Reset und Autoreset muss den Anforderungen der EN 1760-2 (Zustandsdiagramm A2, A3) entsprechen. Das Schaltungsbeispiel ist im spannungslosen Zustand dargestellt. Überwachung der Sicherheits-Schaltleisten SE 40 / SE 70 mit einem Sicherheitsbaustein SE-400C bis zu PL e und Kategorie 4. Der Rückführkreis überwacht die Stellung der Schütze KA und KB. |
Логистические характеристики
| ТН ВЭД: | |
| Страна происхождения: | CZ |
| EAN: | |
| Вес: | 0,18 kg |
| Длина: | 0,00 m |
| Ширина: | 0,00 m |
| Высота: | 0,00 m |