301108
OBE25M-R201-S2EP-IO-V1
Thru-beam sensor (pair)
The optical sensors in the series are the first devices to offer an end-to-end solution in a medium-sized standard design – from the thru-beam sensor through to the measuring distance sensor. As a result of this design, the sensors are able to perform practically all standard automation tasks. Thru-beam sensor SET, Medium design with versatile mounting options, IO-link interface for service and process data, Various frequencies for avoiding mutual interference (cross-talk immunity), Extended temperature range. 40°C ... 60°C, High degree of protection IP69Kfa. The entire series enables sensors to communicate via IO-Link. The DuraBeam laser sensors are durable and can be used in the same way as a standard sensor. Multi Pixel Technology (MPT) ensures that the standard sensors are flexible and can be adapted to the application environment.
Emitter: | OBE25M-R201-S-IO-V1 |
Receiver: | OBE25M-R201-2EP-IO-V1 |
Effective detection range: | 0 ... 25 m |
Threshold detection range: | 33 m |
Light source: | LED |
Light type: | modulated visible red light |
LED risk group labelling: | exempt group |
Alignment aid: | LED red (in receiver lens) illuminated constantly: beam is interrupted, flashes: reaching switching point, off: sufficient stability control |
Diameter of the light spot: | approx. 850 mm at a distance of 25 m |
Angle of divergence: | approx. 2 ° |
Ambient light limit: | EN 60947-5-2 : 40000 Lux |
MTTFd: | 462 a |
Mission Time (TM): | 20 a |
Diagnostic Coverage (DC): | 60 % |
Operation indicator: | LED green: constantly on - power on flashing (4Hz) - short circuit flashing with short break (1 Hz) - IO-Link mode |
Function indicator: | Yellow LED: Permanently lit - light path clear Permanently off - object detected Flashing (4 Hz) - insufficient operating reserve |
Control elements: | Receiver: light/dark switch |
Control elements: | Receiver: sensitivity adjustment |
Operating voltage: | 10 ... 30 V DC |
Ripple: | max. 10 % |
No-load supply current: | Emitter: ≤ 15 mA Receiver: ≤ 15 mA at 24 V Operating voltage |
Protection class: | III |
Interface type: | IO-Link ( via C/Q = pin 4 ) |
Device profile: | Identification and diagnosis Smart Sensor: Receiver: type 2.4 Emitter: - |
Transfer rate: | COM 2 (38.4 kBaud) |
IO-Link Revision: | 1.1 |
Min. cycle time: | 2.3 ms |
Process data width: | Emitter: Process data input: 0 bit Process data output: 1 bit Receiver: Process data input: 2 bit Process data output: 2 bit |
SIO mode support: | yes |
Device ID: | Emitter: 0x111411 (1119249) Receiver: 0x111311 (1118993) |
Compatible master port type: | A |
Test input: | emitter deactivation at +UB |
Switching type: | The switching type of the sensor is adjustable. The default setting is: C/Q - Pin4: NPN normally open / dark-on, PNP normally closed / light-on, IO-Link /Q - Pin2: NPN normally closed / light-on, PNP normally open / dark-on |
Signal output: | 2 push-pull (4 in 1)outputs, short-circuit protected, reverse polarity protected, overvoltage protected |
Switching voltage: | max. 30 V DC |
Switching current: | max. 100 mA , resistive load |
Usage category: | DC-12 and DC-13 |
Voltage drop: | ≤ 1.5 V DC |
Switching frequency: | 1000 Hz |
Response time: | 0.5 ms |
Communication interface: | IEC 61131-9 |
Product standard: | EN 60947-5-2 |
UL approval: | E87056 , cULus Listed , class 2 power supply , type rating 1 |
CCC approval: | CCC approval / marking not required for products rated ≤36 V |
Ambient temperature: | -40 ... 60 °C (-40 ... 140 °F) |
Storage temperature: | -40 ... 70 °C (-40 ... 158 °F) |
Housing width: | 15 mm |
Housing height: | 61.7 mm |
Housing depth: | 41.7 mm |
Degree of protection: | IP67 / IP69 / IP69K |
Connection: | 4-pin, M12 x 1 connector, 90° rotatable |
Material: Housing: | PC (Polycarbonate) |
Material: Optical face: | PMMA |
Mass: | Emitter: approx. 47 g receiver: approx. 47 g |
ТН ВЭД: | |
Страна происхождения: | SG |
EAN: | |
Вес: | 0,00 kg |
Длина: | 0,00 m |
Ширина: | 0,00 m |
Высота: | 0,00 m |