View this page in: English
Email: "ucnguBrctvdgcxgt0eqo"
Выберите язык
Запрос цены в 1 клик
Продукт
Pepperl+Fuchs
291803
NCN3-F25F-N4-V1
Сделать запрос
Pepperl+Fuchs 291803
NCN3-F25F-N4-V1
Inductive sensor
По запросу. Пожалуйста, отправьте нам письмо, чтобы узнать цену и наличие.
"ucnguBrctvdgcxgt0eqo"
Описание
Series: Double sensor, Housing material: PBT, Output type: 2-wire, Installation: flush mountable, Type of voltage: DC, Connection type: Connector plug M12 x 1 , 4-pin, Degree of protection: IP67fa
Технические характеристики
| Switching function: | 2 x normally closed (NC) |
| Output type: | NAMUR |
| Rated operating distance: | 3 mm |
| Installation: | flush mountable |
| Assured operating distance: | 0 ... 2.43 mm |
| Actual operating distance: | 2.7 ... 3.3 mm typ. |
| Reduction factor rAl: | 0.52 |
| Reduction factor rCu: | 0.43 |
| Reduction factor r304: | 0.86 |
| Reduction factor rSt37: | 1 |
| Reduction factor rBrass: | 0.54 |
| Output type: | 2-wire |
| Nominal voltage: | 8.2 V (Ri approx. 1 kΩ) |
| Switching frequency: | 0 ... 1500 Hz |
| Hysteresis: | typ. 5 % |
| Reverse polarity protection: | reverse polarity protected |
| Short-circuit protection: | yes |
| Suitable for 2:1 technology: | yes , Reverse polarity protection diode not required |
| Current consumption: Measuring plate not detected: | ≥ 3 mA |
| Current consumption: Measuring plate detected: | ≤ 1 mA |
| Time delay before availability: | ≤ 1 ms |
| Switching state indicator: | LED, yellow |
| MTTFd: | 1010 a |
| Mission Time (TM): | 20 a |
| Diagnostic Coverage (DC): | 0 % |
| Standard conformity: NAMUR: | EN 60947-5-6:2000 IEC 60947-5-6:1999 |
| Standard conformity: Electromagnetic compatibility: | NE 21:2007 |
| Standard conformity: Standards: | EN 60947-5-2:2007 EN 60947-5-2/A1:2012 IEC 60947-5-2:2007 IEC 60947-5-2 AMD 1:2012 |
| EAC conformity: | TR CU 012/2011 |
| FM approval: Control drawing: | 116-0165 |
| UL approval: | cULus Listed, General Purpose |
| FM approval: Ordinary Location: | E87056 |
| FM approval: Hazardous Location: | E501628 |
| FM approval: Control drawing: | 116-0456 |
| CSA approval: | cCSAus Listed, General Purpose |
| CCC approval: | CCC approval / marking not required for products rated ≤36 V |
| Ambient temperature: | -25 ... 100 °C (-13 ... 212 °F) |
| Storage temperature: | -40 ... 100 °C (-40 ... 212 °F) |
| Connection type: | Connector plug M12 x 1 , 4-pin |
| Housing material: | PBT |
| Sensing face: | PBT |
| Degree of protection: | IP67 |
| Mass: | 44 g |
| Tightening torque, fastening screws: | M5 x 25 : 2.7 Nm |
| Note: | Mounted on mechanical drive |
| Use in the hazardous area: | see instruction manuals |
Логистические характеристики
| ТН ВЭД: | |
| Страна происхождения: | CZ |
| EAN: | |
| Вес: | 0,00 kg |
| Длина: | 0,00 m |
| Ширина: | 0,00 m |
| Высота: | 0,00 m |