291801
PL3-F25-N4-K
Inductive sensor
Series: Pcb version, Housing material: PBT, Output type: 2-wire, Installation: flush mountable, Type of voltage: DCfa
Switching function: | 2 x normally closed (NC) |
Output type: | NAMUR |
Rated operating distance: | 3 mm |
Installation: | flush mountable |
Assured operating distance: | 0 ... 2.43 mm |
Actual operating distance: | 2.7 ... 3.3 mm |
Reduction factor rAl: | 0.52 |
Reduction factor rCu: | 0.43 |
Reduction factor r304: | 0.86 |
Reduction factor rSt37: | 1 |
Reduction factor rBrass: | 0.54 |
Output type: | 2-wire |
Nominal voltage: | 8.2 V (Ri approx. 1 kΩ) |
Operating voltage: | 5 ... 25 V |
Switching frequency: | 0 ... 100 Hz |
Hysteresis: | typ. 5 % |
Reverse polarity protection: | reverse polarity protected |
Short-circuit protection: | yes |
Suitable for 2:1 technology: | yes , Reverse polarity protection diode not required |
Current consumption: Measuring plate not detected: | ≥ 3 mA at nominal voltage |
Current consumption: Measuring plate detected: | ≤ 1 mA at nominal voltage |
Time delay before availability: | ≤ 1 ms |
Switching state indicator: | LED, yellow |
Valve status indicator: | LED, yellow can be switched off by of DB1 |
MTTFd: | 834 a |
Mission Time (TM): | 20 a |
Diagnostic Coverage (DC): | 0 % |
Standard conformity: NAMUR: | EN 60947-5-6:2000 IEC 60947-5-6:1999 |
Standard conformity: Electromagnetic compatibility: | NE 21:2007 |
Standard conformity: Standards: | EN 60947-5-2:2007 EN 60947-5-2/A1:2012 IEC 60947-5-2:2007 IEC 60947-5-2 AMD 1:2012 |
Ambient temperature: | -25 ... 100 °C (-13 ... 212 °F) |
Storage temperature: | -40 ... 100 °C (-40 ... 212 °F) |
Connection (system side): | Cage tension spring terminals |
Core cross-section (system side): | up to 2.5 mm2 |
Connection (valve side): | Cage tension spring terminals |
Core cross-section (valve side): | up to 2.5 mm2 |
Housing material: | PBT |
Sensing face: | PBT |
Mass: | 91 g |
Tightening torque, fastening screws: | 0.3 Nm |
Use in the hazardous area: | see instruction manuals |
ТН ВЭД: | |
Страна происхождения: | CZ |
EAN: | |
Вес: | 0,00 kg |
Длина: | 0,00 m |
Ширина: | 0,00 m |
Высота: | 0,00 m |