Pepperl+Fuchs
283680
KFD2-STC4-Ex1-Y1
Pepperl+Fuchs 283680
KFD2-STC4-Ex1-Y1
SMART Transmitter Power Supply, Output Current Sink
Описание
1-channel isolated barrier, 24 V DC supply (Power Rail), Input 2-wire and 3-wire SMART transmitters and 2-wire SMART current sources, Output 0/4 mA ... 20 mA current sink, Terminal blocks with test sockets, Up to SIL 2 acc. to IEC 61508pa. This isolated barrier is used for intrinsic safety applications. The device supplies 2-wire and 3-wire SMART transmitters in a hazardous area, and can also be used with 2-wire SMART current sources. It transfers the analog input signal to the safe area as an isolated current value. Digital signals may be superimposed on the input signal in the hazardous or safe area and are transferred bi-directionally. It is designed to provide a sink mode output on the safe area terminals. If the HART communication resistance in the loop is too low, the internal resistance of 250 Ω between terminals 8 and 9 can be used. Test sockets for the connection of HART communicators are integrated into the terminals of the device.
Технические характеристики
| Signal type: | Analog input |
| Safety Integrity Level (SIL): | SIL 2 |
| Connection: | Power Rail or terminals 14+, 15- |
| Rated voltage: | 20 ... 35 V DC |
| Ripple: | within the supply tolerance |
| Power dissipation: | 1.4 W |
| Power consumption: | 1.8 W |
| Connection side: | field side |
| Connection: | terminals 1+, 2-, 3 or 5-, 6+ |
| Input signal: | 0/4 ... 20 mA |
| Voltage drop: | ≤ 2.4 V at 20 mA (terminals 5, 6) |
| Input resistance: | ≤ 64 Ω terminals 2-, 3 ; ≤ 500 Ω terminals 1+, 3 (250 Ω load) |
| Available voltage: | ≥ 16 V at 20 mA terminals 1+, 3 |
| Connection side: | control side |
| Connection: | terminals 7+, 8- |
| Output signal: | 0/4 ... 20 mA (overload > 25 mA) |
| Ripple: | max. 50 µA rms |
| External supply (loop): | 11 ... 30 V DC |
| Deviation: | at 20 °C (68 °F), 0/4 ... 20 mA ≤ 10 µA incl. calibration, linearity, hysteresis, loads and fluctuations of supply voltage |
| : Influence of ambient temperature: | 0.25 µA/K |
| Frequency range: | field side into the control side: bandwidth with 0.5 Vpp signal 0 ... 7.5 kHz (-3 dB) control side into the field side: bandwidth with 0.5 Vpp signal 0.3 ... 7.5 kHz (-3 dB) |
| Settling time: | 200 µs |
| Rise time/fall time: | 20 µs |
| Output/power supply: | functional insulation, rated insulation voltage 50 V AC |
| Display elements: | LED |
| Labeling: | space for labeling at the front |
| Electromagnetic compatibility: Directive 2014/30/EU: | EN 61326-1:2013 (industrial locations) |
| Electromagnetic compatibility: | NE 21:2011 |
| Degree of protection: | IEC 60529:2001 |
| Protection against electrical shock: | UL 61010-1:2012 |
| Ambient temperature: | -20 ... 60 °C (-4 ... 140 °F) |
| Degree of protection: | IP20 |
| Connection: | screw terminals |
| Mass: | approx. 200 g |
| Dimensions: | 20 x 124 x 115 mm (0.8 x 4.9 x 4.5 inch) , housing type B2 |
| Mounting: | on 35 mm DIN mounting rail acc. to EN 60715:2001 |
| EU-type examination certificate: | BAS 99 ATEX 7060 X |
| Electromagnetic compatibility: Marking: | II (1)G [Ex ia Ga] IIC , II (1)D [Ex ia Da] IIIC , I (M1) [Ex ia Ma] I |
| Electromagnetic compatibility: Input: | [Ex ia Ga] IIC, [Ex ia Da] IIIC, [Ex ia Ma] I |
| Supply: Maximum safe voltage: | 250 V (Attention! The rated voltage can be lower.) |
| Equipment: | terminals 1+, 3- |
| Supply: Voltage Uo: | 25.4 V |
| Supply: Current Io: | 86.8 mA |
| Supply: Power Po: | 551 mW |
| Supply: Internal capacitance Ci: | 12 nF |
| Supply: Internal inductance Li: | 0 mH |
| Equipment: | terminals 2-, 3 |
| Supply: Current Io/Current Ii: | 74 mA / 115 mA |
| Supply: Current Ii: | 115 mA |
| Supply: Voltage Uo: | 3.5 V |
| Supply: Current Io: | 74 mA |
| Supply: Power Po: | 64 mW |
| Equipment: | terminals 1+, 2 / 3- |
| Supply: Voltage Ui: | 30 V |
| Supply: Current Ii: | 115 mA |
| Supply: Voltage Uo: | 25.4 V |
| Supply: Current Io: | 115 mA |
| Supply: Power Po: | 584 mW |
| Equipment: | terminals 5-, 6+ |
| Supply: Voltage Ui: | 30 V |
| Supply: Current Ii: | 115 mA |
| Supply: Voltage Uo: | 8.7 V |
| Supply: Current Io: | 0 mA |
| Certificate: | TÜV 99 ATEX 1499 X |
| Supply: Marking: | II 3G Ex nA II T4 [device in zone 2] |
| Galvanic isolation: Input/Output: | safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V |
| Galvanic isolation: Input/power supply: | safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V |
| Directive conformity: Directive 2014/34/EU: | EN 60079-0:2012+A11:2013 , EN 60079-11:2012 , EN 60079-15:2010 |
| UL approval: Control drawing: | 116-0428 (cULus) |
| IECEx approval: | IECEx BAS 04.0016X IECEx CML 15.0055X |
| UL approval: Approved for: | [Ex ia Ga] IIC, [Ex ia Da] IIIC, [Ex ia Ma] I Ex nA IIC T4 Gc |
| Supplementary information: | Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com. |
Логистические характеристики
| ТН ВЭД: | |
| Страна происхождения: | SG |
| EAN: | |
| Вес: | 0,00 kg |
| Длина: | 0,00 m |
| Ширина: | 0,00 m |
| Высота: | 0,00 m |