Pepperl+Fuchs 281014

OBE12M-R101-SEP-IO-0,3M-V3

Thru-beam sensor

По запросу. Пожалуйста, отправьте нам письмо, чтобы узнать цену и наличие.
"ucnguBrctvdgcxgt0eqo"

Описание

The miniature optical sensors are the first devices of their kind to offer an end-to- end solution in a small single standard design — from thru-beam sensor through to a distance measurement device. As a result of this design, the sensors are able to perform practically all standard automation tasks. Thru-beam sensor SET, Miniature design with versatile mounting options, IO-link interface for service and process data, Various frequencies for avoiding mutual interference (cross-talk immunity), Extended temperature range. 40°C ... 60°C, High degree of protection IP69Kfa. The DuraBeam laser sensors are durable and can be used in the same way as a standard sensor. The use of Multi Pixel Technology gives the standard sensors a high level of flexibility and enables them to adapt more effectively to their operating environment.

Технические характеристики

Emitter: OBE12M-R101-S-IO-0,3M-V3
Receiver: OBE12M-R101-EP-IO-0,3M-V3
Effective detection range: 0 ... 12 m
Threshold detection range: 15 m
Light source: LED
Light type: modulated visible red light
LED risk group labelling: exempt group
Diameter of the light spot: approx. 65 mm at a distance of 1 m
Angle of divergence: 3.7 °
Ambient light limit: EN 60947-5-2 : 30000 Lux
MTTFd: 462 a
Mission Time (TM): 20 a
Diagnostic Coverage (DC): 0 %
Operation indicator: LED green: constantly on - power on flashing (4Hz) - short circuit flashing with short break (1 Hz) - IO-Link mode
Function indicator: Yellow LED: Permanently lit - light path clear Permanently off - object detected Flashing (4 Hz) - insufficient operating reserve
Control elements: Receiver: light/dark switch
Control elements: Receiver: sensitivity adjustment
Parameterization indicator: IO link communication: green LED goes out briefly (1 Hz)
Operating voltage: 10 ... 30 V DC
Ripple: max. 10 %
No-load supply current: Emitter: ≤ 14 mA Receiver: ≤ 13 mA at 24 V supply voltage
Protection class: III
Interface type: IO-Link ( via C/Q = pin 4 )
Transfer rate: COM 2 (38.4 kBaud)
IO-Link Revision: 1.1
Min. cycle time: 2.3 ms
Process data width: Emitter: Process data output: 2 Bit Receiver: Process data input: 2 Bit Process data output: 2 Bit
SIO mode support: yes
Device ID: Emitter: 0x110401 (1115137) Receiver: 0x110301 (1114881)
Compatible master port type: A
Test input: emitter deactivation at +UB
Switching type: The switching type of the sensor is adjustable. The default setting is: C/Q - Pin4: NPN normally open / dark-on, PNP normally closed / light-on, IO-Link
Signal output: 1 push-pull (4 in 1) output, short-circuit protected, reverse polarity protected, overvoltage protected
Switching voltage: max. 30 V DC
Switching current: max. 100 mA , resistive load
Usage category: DC-12 and DC-13
Voltage drop: ≤ 1.5 V DC
Switching frequency: 1000 Hz
Response time: 0.5 ms
Directive conformity: EMC Directive 2004/108/EC: EN 60947-5-2:2007+A1:2012
Standard conformity: Product standard: EN 60947-5-2:2007+A1:2012 IEC 60947-5-2:2007 + A1:2012
Standard conformity: Standards: UL 60947-5-2: 2014 IEC 61131-9:2013 EN 62471:2008 EN 61131-9:2013
UL approval: E87056 , cULus Listed , class 2 power supply , type rating 1
Ambient temperature: -40 ... 60 °C (-40 ... 140 °F) , fixed cable -25 ... 60 °C (-13 ... 140 °F) , movable cable not appropriate for conveyor chains
Storage temperature: -40 ... 70 °C (-40 ... 158 °F)
Housing width: 13.9 mm
Housing height: 33.8 mm
Housing depth: 18.3 mm
Degree of protection: IP67 / IP69 / IP69K
Connection: 300 mm fixed cable with M8 x 1, 3-pin connector
Material: Housing: PC (Polycarbonate)
Material: Optical face: PMMA
Mass: Emitter: approx. 10 g receiver: approx. 10 g
Cable length: 0.3 m

Логистические характеристики

ТН ВЭД:
Страна происхождения: SG
EAN:
Вес: 0,00 kg
Длина: 0,00 m
Ширина: 0,00 m
Высота: 0,00 m