Pepperl+Fuchs
274895
KFD2-RSH-1.2E.L2
Pepperl+Fuchs 274895
KFD2-RSH-1.2E.L2
Relay Module
Описание
1-channel signal conditioner, 24 V DC supply, Logic input 19 V DC .. 26.4 V DC, Recommended connectable voltage 8 V DC .. 60 V DC, Relay contact output for energized to safe function , Line fault transparency (LFT), Diagnostic function, Up to SIL 3 acc. to IEC 61508pa. This signal conditioner provides the galvanic isolation between field circuits and control circuits. The device is a relay module that is suitable for safely switching applications of a load circuit. The device isolates load circuits up to 60 V DC and the 24 V DC control circuit. The energized to safe (ETS) function is permitted for SIL 3 applications. An internal fault or a line fault is signalized by the impedance change of the relay contact input and an additional relay contact output. A fault is signalized by LEDs and a separate collective error message output.
Технические характеристики
| Signal type: | Digital Output |
| Safety Integrity Level (SIL): | SIL 3 |
| Connection: | Power Rail or terminals 14+, 15- |
| Rated voltage: | 19 ... 26.4 V DC |
| Input current: | 35 mA at 24 V DC , max. 44 mA at 19 V DC , with enabled internal fault detection |
| Power consumption: | < 1.7 W , includes the power consumption of the digital input , see derating curves |
| Connection side: | control side |
| Connection: | terminals 7+, 8- |
| Pulse/Pause ratio: | min. 150 ms / min. 150 ms with disabled internal fault detection min. 1 s / min. 1 s with enabled internal fault detection |
| Test pulse length: | max. 2 ms from DO card |
| Signal level: | 0-signal: -5 ... 5 V DC 1-signal: 19 ... 26.4 V DC |
| Rated current: | 0-signal: typ. 1.6 mA at 1.5 V DC; typ. 8 mA at 3 V DC (maximum leakage current DO card) 1-signal: ≥ 36 mA (minimum load current DO card) |
| Inrush current: | < 200 mA after 100 µs |
| Connection side: | field side |
| Connection: | external voltage : terminals 5+, 2- load : terminals 6, 3 |
| Connectable voltage: | 8 ... 60 V DC |
| Power dissipation: | < 3.3 W at 5 A , see derating curves |
| Contact loading: | 30 V DC / 5 A resistive load , see derating curves |
| Minimum switch current: | 10 mA |
| Mechanical life: | 5 x 106 switching cycles |
| Line fault detection: | low voltage < 5 V DC undercurrent: 10 mA DC; overcurrent: 2.2 A DC (relay energized) breakage: 8.2 kΩ; short-circuit: 11 Ω (load, relay de-energized) |
| Connection: | terminals 10, 11 |
| Contact loading: | 30 V DC/ 0.5 A resistive load |
| Reaction time: | < 2 s |
| Mechanical life: | 105 switching cycles |
| Switching frequency: | < 3 Hz with disabled internal fault detection < 0.5 Hz with enabled internal fault detection |
| Input/power supply: | basic insulation according to IEC/EN 61010-1, rated insulation voltage 60 Veff |
| Input/fault indication output: | basic insulation according to IEC/EN 61010-1, rated insulation voltage 30 Veff |
| Output/other circuits: | reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff |
| Display elements: | LEDs |
| Control elements: | DIP-switch |
| Configuration: | via DIP switches |
| Labeling: | space for labeling at the front |
| Electromagnetic compatibility: Directive 2014/30/EU: | EN 61326-1:2013 (industrial locations) |
| Electromagnetic compatibility: | NE 21:2012 , EN 61326-3-2:2008 , EN 61326-3-1:2008 |
| Degree of protection: | IEC 60529:2013 |
| Protection against electrical shock: | EN 61010-1:2010 |
| Ambient temperature: | -20 ... 60 °C (-4 ... 140 °F) Observe the temperature range limited by derating, see section derating. |
| Degree of protection: | IP20 |
| Connection: | screw terminals |
| Mass: | approx. 134 g |
| Dimensions: | 20 x 119 x 115 mm (0.8 x 4.7 x 4.5 inch) , housing type B2 |
| Mounting: | on 35 mm DIN mounting rail acc. to EN 60715:2001 |
| Certificate: | PF 17 CERT 4305 X |
| Electromagnetic compatibility: Marking: | II 3G Ex nC ec IIC T4 Gc [device in zone 2] |
| Directive conformity: Directive 2014/34/EU: | EN 60079-0:2012+A11:2013 , EN 60079-7:2015 , EN 60079-15:2010 |
| UL approval: | E106378 |
| Supplementary information: | Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com. |
Логистические характеристики
| ТН ВЭД: | |
| Страна происхождения: | SG |
| EAN: | |
| Вес: | 0,00 kg |
| Длина: | 0,00 m |
| Ширина: | 0,00 m |
| Высота: | 0,00 m |