View this page in: English
Email: "ucnguBrctvdgcxgt0eqo"
Выберите язык
Запрос цены в 1 клик
Продукт
Pepperl+Fuchs
217923
NBN40-U1LK-N0
Сделать запрос
Pepperl+Fuchs 217923
NBN40-U1LK-N0
Inductive sensor
По запросу. Пожалуйста, отправьте нам письмо, чтобы узнать цену и наличие.
"ucnguBrctvdgcxgt0eqo"
Описание
Series: VariKont ®, Housing material: PA, Output type: 2-wire, Installation: non-flush, Type of voltage: DC, Connection type: screw terminals, Degree of protection: IP67 / IP69Kfa
Технические характеристики
| Switching function: | Normally closed (NC) |
| Output type: | NAMUR |
| Rated operating distance: | 40 mm |
| Installation: | non-flush |
| Assured operating distance: | 0 ... 32.4 mm |
| Reduction factor rAl: | 0.41 |
| Reduction factor rCu: | 0.38 |
| Reduction factor r304: | 0.75 |
| Reduction factor rBrass: | 0.46 |
| Output type: | 2-wire |
| Installation conditions: A: | 25 mm |
| Nominal voltage: | 8.2 V |
| Switching frequency: | 0 ... 100 Hz |
| Hysteresis: | 2 ... 20 typ. 10 % |
| Reverse polarity protection: | reverse polarity protected |
| Short-circuit protection: | yes |
| Current consumption: Measuring plate not detected: | min. 2.5 mA |
| Current consumption: Measuring plate detected: | ≤ 1 mA |
| Switching state indicator: | LED, yellow |
| Standard conformity: NAMUR: | EN 60947-5-6:2000 IEC 60947-5-6:1999 |
| Standard conformity: Electromagnetic compatibility: | NE 21:2012 |
| Standard conformity: Standards: | EN 60947-5-2:2007 EN 60947-5-2/A1:2012 IEC 60947-5-2:2007 IEC 60947-5-2 AMD 1:2012 |
| UL approval: Ordinary Location: | E87056 |
| UL approval: Hazardous Location: | E501628 |
| UL approval: Control drawing: | 116-0451 |
| CCC approval: | CCC approval / marking not required for products rated ≤36 V |
| Ambient temperature: | -25 ... 100 °C (-13 ... 212 °F) |
| Storage temperature: | -40 ... 100 °C (-40 ... 212 °F) |
| Connection type: | screw terminals |
| Information for connection: | A maximum of two conductors with the same core cross section may be mounted on one terminal connection! tightening torque 1.2 Nm + 10 % |
| Core cross-section: | up to 2.5 mm2 |
| UL approval: Minimum core cross-section: | without wire end ferrule 0.5 mm2 , with connector sleeves 0.34 mm2 |
| UL approval: Maximum core cross-section: | without wire end ferrule 2.5 mm2 , with connector sleeves 1.5 mm2 |
| Connection (system side): | screw terminals , M20 x 1.5 cable gland , usable thread length 9.1 mm , screw-in depth max. 9.1 mm |
| Housing material: | PA |
| Sensing face: | PA |
| Housing base: | plastic |
| Degree of protection: | IP67 / IP69K |
| Use in the hazardous area: | see instruction manuals |
Логистические характеристики
| ТН ВЭД: | |
| Страна происхождения: | ID |
| EAN: | |
| Вес: | 0,00 kg |
| Длина: | 0,00 m |
| Ширина: | 0,00 m |
| Высота: | 0,00 m |