203016
NBB15-U2-E2
Inductive sensor
Series: VariKont ®, Housing material: PA/metal with epoxy powder coating, Output type: 3-wire, Installation: flush, Type of voltage: DC, Connection type: screw terminals, Degree of protection: IP68 / IP69Kfa
Switching function: | Normally open (NO) |
Output type: | PNP |
Rated operating distance: | 15 mm |
Installation: | flush |
Output polarity: | DC |
Assured operating distance: | 0 ... 12.15 mm |
Actual operating distance: | 13.5 ... 16.5 mm typ. 15 mm |
Reduction factor rAl: | 0.33 |
Reduction factor rCu: | 0.31 |
Reduction factor r304: | 0.74 |
Reduction factor rBrass: | 0.41 |
Output type: | 3-wire |
Operating voltage: | 10 ... 30 V |
Switching frequency: | 0 ... 560 Hz |
Hysteresis: | typ. 5 % |
Reverse polarity protection: | reverse polarity protected |
Short-circuit protection: | pulsing |
Voltage drop: | ≤ 2 V |
Operating current: | 0 ... 200 mA |
Off-state current: | 0 ... 0.5 mA typ. 0.01 mA |
No-load supply current: | ≤ 20 mA |
Time delay before availability: | 80 ms |
Operating voltage indicator: | LED, green |
Switching state indicator: | LED, yellow |
MTTFd: | 1289 a |
Mission Time (TM): | 20 a |
Diagnostic Coverage (DC): | 0 % |
Standard conformity: Standards: | EN 60947-5-2:2007 EN 60947-5-2/A1:2012 IEC 60947-5-2:2007 IEC 60947-5-2 AMD 1:2012 |
UL approval: | cULus Listed, General Purpose |
CCC approval: | CCC approval / marking not required for products rated ≤36 V |
Ambient temperature: | -25 ... 85 °C (-13 ... 185 °F) |
Connection type: | screw terminals |
Core cross-section: | up to 2.5 mm2 |
Housing material: | PA/metal with epoxy powder coating |
Sensing face: | PA |
Housing base: | plastic |
Degree of protection: | IP68 / IP69K |
Mass: | 225 g |
Note: | Tightening torque: 1.8 Nm (housing) |
ТН ВЭД: | |
Страна происхождения: | VN |
EAN: | |
Вес: | 0,00 kg |
Длина: | 0,00 m |
Ширина: | 0,00 m |
Высота: | 0,00 m |