106458
NJ6-22-N-5M
Inductive sensor
Series: Cylindrical type, Housing material: PBT, Output type: 2-wire, Installation: flush, Type of voltage: DC, Connection type: cable, Degree of protection: IP68fa
| Switching function: | Normally closed (NC) |
| Output type: | NAMUR |
| Rated operating distance: | 6 mm |
| Installation: | flush |
| Assured operating distance: | 0 ... 4.86 mm |
| Reduction factor rAl: | 0.4 |
| Reduction factor rCu: | 0.3 |
| Reduction factor r304: | 0.85 |
| Output type: | 2-wire |
| Nominal voltage: | 8.2 V (Ri approx. 1 kΩ) |
| Switching frequency: | 0 ... 2000 Hz |
| Hysteresis: | typ. % |
| Current consumption: Measuring plate not detected: | min. 3 mA |
| Current consumption: Measuring plate detected: | ≤ 1 mA |
| MTTFd: | 4566 a |
| Mission Time (TM): | 20 a |
| Diagnostic Coverage (DC): | 0 % |
| Standard conformity: NAMUR: | EN 60947-5-6:2000 IEC 60947-5-6:1999 |
| Standard conformity: Standards: | EN 60947-5-2:2007 EN 60947-5-2/A1:2012 IEC 60947-5-2:2007 IEC 60947-5-2 AMD 1:2012 |
| IECEx approval: Equipment protection level Gb: | IECEx PTB 11.0037X |
| IECEx approval: Equipment protection level Da: | IECEx PTB 11.0037X |
| IECEx approval: Equipment protection level Mb: | IECEx PTB 11.0037X |
| ATEX approval: Equipment protection level Gb: | PTB 00 ATEX 2048 X |
| ATEX approval: Equipment protection level Gc (ic): | PF13CERT2895 X |
| ATEX approval: Equipment protection level Da: | PTB 00 ATEX 2048 X |
| FM approval: Control drawing: | 116-0165 |
| UL approval: | cULus Listed, General Purpose |
| CSA approval: | cCSAus Listed, General Purpose |
| CCC approval: | CCC approval / marking not required for products rated ≤36 V |
| Ambient temperature: | -25 ... 100 °C (-13 ... 212 °F) |
| Connection type: | cable |
| Housing material: | PBT |
| Sensing face: | PBT |
| Degree of protection: | IP68 |
| Cable: Cable diameter: | 6 mm ± 0.2 mm |
| Cable: Bending radius: | > 10 x cable diameter |
| Cable: Material: | PVC |
| Cable: Core cross-section: | 0.75 mm2 |
| Cable: Length: | 5 m |
| Use in the hazardous area: | see instruction manuals |
| ТН ВЭД: | |
| Страна происхождения: | ID |
| EAN: | |
| Вес: | 0,00 kg |
| Длина: | 0,00 m |
| Ширина: | 0,00 m |
| Высота: | 0,00 m |