038141
NBN3-F25F-E8-V1
Inductive sensor
Series: Double sensor, Housing material: PBT, Output type: 3-wire, Installation: flush mountable, Type of voltage: DC, Connection type: Connector plug M12 x 1 , 4-pin, Degree of protection: IP67fa
Switching function: | 2 x normally open (NO) |
Output type: | PNP |
Rated operating distance: | 3 mm |
Installation: | flush mountable |
Output polarity: | DC |
Assured operating distance: | 0 ... 2.3 mm |
Actual operating distance: | 2.6 ... 2.6 mm typ. |
Reduction factor rAl: | 0.5 |
Reduction factor r304: | 1 |
Reduction factor rSt37: | 1.1 |
Output type: | 3-wire |
Operating voltage: | 10 ... 30 V DC |
Switching frequency: | 0 ... 500 Hz |
Hysteresis: | typ. 5 % |
Reverse polarity protection: | all connections |
Short-circuit protection: | pulsing |
Voltage drop: | ≤ 3 V |
Operating current: | 0 ... 200 mA |
Off-state current: | 0 ... 0.5 mA typ. 0.1 µA at 25 °C |
No-load supply current: | ≤ 25 mA |
Time delay before availability: | ≤ 500 ms |
Operating voltage indicator: | LED, green |
Switching state indicator: | LED, yellow |
MTTFd: | 870 a |
Mission Time (TM): | 20 a |
Diagnostic Coverage (DC): | 0 % |
Standard conformity: Standards: | EN 60947-5-2:2007 EN 60947-5-2/A1:2012 IEC 60947-5-2:2007 IEC 60947-5-2 AMD 1:2012 |
UL approval: | cULus Listed, General Purpose |
CSA approval: | cCSAus Listed, General Purpose |
CCC approval: | CCC approval / marking not required for products rated ≤36 V |
Ambient temperature: | -25 ... 70 °C (-13 ... 158 °F) |
Storage temperature: | -40 ... 85 °C (-40 ... 185 °F) |
Connection type: | Connector plug M12 x 1 , 4-pin |
Housing material: | PBT |
Sensing face: | PBT |
Degree of protection: | IP67 |
Tightening torque, fastening screws: | M5 x 25 : 2.7 Nm |
Note: | Installation in housing |
ТН ВЭД: | |
Страна происхождения: | CZ |
EAN: | |
Вес: | 0,00 kg |
Длина: | 0,00 m |
Ширина: | 0,00 m |
Высота: | 0,00 m |