EKM1101
EKM1101 | EtherCAT Coupler with ID switch and diagnostics
The EKM1101 EtherCAT Coupler connects the ELMxxxx EtherCAT measurement modules with EtherCAT. Such a station consists of an EKM1101 coupler, any number of EtherCAT Terminals and a bus end cap or an EtherCAT extension such as EK1110 or EK1122. The coupler converts the passing telegrams from Ethernet 100BASE-TX to E-bus signal representation.
Task within EtherCAT system: | coupling of EtherCAT Terminals (ELxxxx) to 100BASE-TX EtherCAT networks, with identity verification |
Data transfer medium: | Ethernet/EtherCAT cable (min. Cat. 5), shielded |
Distance between stations: | max. 100 m (100BASE-TX) |
Number of EtherCAT Terminals: | up to 65,534 |
Type/number of peripheral signals: | max. 4.2 GB addressable I/O points |
Number of configurable IDs: | 256 |
Protocol: | EtherCAT |
Delay: | approx. 1 µs |
Data transfer rates: | 100 Mbit/s |
Bus interface: | 2 x RJ45 |
Power supply: | 24 V DC (-15 %/+20 %) |
Current consumption E-bus: | – |
Current consumption from US: | 50 mA + (∑ E-bus current/4) |
Current consumption from UP: | 50 mA + load |
Current supply E-bus: | 2000 mA |
Power contacts: | max. 24 V DC/max. 2 A |
Special features: | electrically isolated output voltages, reverse polarity protection, diagnostics of supply and output voltages |
Electrical isolation: | 500 V (power contact/supply voltage/EtherCAT) |
Weight: | approx. 450 g |
Operating/storage temperature: | -25…+60 °C/-40…+85 °C |
Relative humidity: | 95 %, no condensation |
Vibration/shock resistance: | conforms to EN 60068-2-6/EN 60068-2-27 |
EMC immunity/emission: | conforms to EN 61000-6-2/EN 61000-6-4 |
Protect. class/installation pos.: | IP 20/variable |
Approvals/markings: | CE |
ТН ВЭД: | |
Страна происхождения: | |
EAN: | |
Вес: | 0,00 kg |
Длина: | 0,00 m |
Ширина: | 0,00 m |
Высота: | 0,00 m |