Article image 9918840024

Weidmueller 9918840024

CP SNT 12W 24V 0.5A

2580180000

Na prośbę. Prześlij nam wiadomość e-mail z zapytaniem o cenę i dostępność.
"ucnguBrctvdgcxgt0eqo"

Opis

Parametry techniczne

Delivery status: This article will no longer be available in the future.
Available until: 2019-12-31
Type: CP SNT 12W 24V 0.5A
Order No.: 9918840024
Version: Power supply, switch-mode power supply unit, 24 V
GTIN (EAN): 4032248217519
Qty.: 1 pc(s).
Width: 22.5 mm
Width (inches): 0.886 inch
Height: 92.4 mm
Height (inches): 3.638 inch
Depth: 112.4 mm
Depth (inches): 4.425 inch
Net weight: 151.9 g
Humidity at operating temperature: 20 to 85% RH without condensation
Humidity at storage temperature: 20 to 90% RH
Operating temperature, max.: 50 °C
Operating temperature, min.: -20 °C
Storage temperature, max.: 85 °C
Storage temperature, min.: -40 °C
Operating temperature: -20 °C...50 °C
Storage temperature: -40 °C...85 °C
REACH SVHC: Lead 7439-92-1
Connection range: 0.5 mm² to 2.5 mm²
Connection system: Screw connection
DC input voltage range: 80...370 V DC
Input current: 260 mA @ 115 V AC; 180 mA @ 230 V AC
Input current at 125 Vdc: 125 mA ± 20%
Input current at 250 Vdc: 65 mA ± 20%
Input frequency: 50/ 60 Hz
Input fuse: 2 A time-lag fuse (internal)
Input voltage (voltage mode input): 85...265 V AC, 120...300 V DC
Surge protection: Varistor
Wire connection method: Screw connection
Connection range: 0.5 mm² to 2.5 mm²
Control at 10...100% load: 0.6%
Control at input voltage: 0.2%
Mains failure bridge-over time: 30 ms @ 115 V AC / 80 ms @ 230 V AC
Max. capacitance at output: 8000 µF
Max. residual ripple: 0.1 %
Output current: 0.5 A
Output power: 12 W
Output voltage: 24 V
Output voltage type: DC
Overload protection: Surge current / thermal cut-out
Parallel connection option: No
Rated output voltage: 24 V DC ± 1 %
Surge protection: Varistor
Wire connection method: Screw connection
Degree of efficiency at max. load: 80%
EMC standards: IEC 61000-6 /-2, -3
Low Voltage Directive: 73/ 23/ EWG
Mounting position, installation notice: horizontally, on terminal rail TS 35
Operating temperature: -20 °C...50 °C
Power factor correction: No
Protection degree: IP20
Short-circuit protection: Yes
Standards: DIN EN 50178, DIN EN 60950, IEC950
Status indication: Green LED
Output current: 0.5 A
Humidity at operating temperature: 20 to 85% RH without condensation
Humidity at storage temperature: 20 to 90% RH
electrical isolation, I/O rail: 4 kV
electrical isolation, input-earth: 1.5 kV
electrical isolation, input-output: 3 kV
electrical isolation, output-earth: 0.5 kV
Connection system: Screw connection
Status indication: Green LED
Certificate No. (CSA): 200039-1174514
Certificate no. (cULus): E196651
ETIM 6.0: EC002540
ETIM 7.0: EC002540
eClass 9.0: 27-04-07-01
eClass 9.1: 27-04-07-01
eClass 10.0: 27-04-07-01
UNSPSC: 30-21-18-01
ROHS: Conform
Delivery status: This article will no longer be available in the future.
Available until: 2019-12-31
Type: CP SNT 12W 24V 0.5A
Order No.: 9918840024
Version: Power supply, switch-mode power supply unit, 24 V
GTIN (EAN): 4032248217519
Qty.: 1 pc(s).
Width: 22.5 mm
Width (inches): 0.886 inch
Height: 92.4 mm
Height (inches): 3.638 inch
Depth: 112.4 mm
Depth (inches): 4.425 inch
Net weight: 151.9 g
Humidity at operating temperature: 20 to 85% RH without condensation
Humidity at storage temperature: 20 to 90% RH
Operating temperature, max.: 50 °C
Operating temperature, min.: -20 °C
Storage temperature, max.: 85 °C
Storage temperature, min.: -40 °C
Operating temperature: -20 °C...50 °C
Storage temperature: -40 °C...85 °C
REACH SVHC: Lead 7439-92-1
Connection range: 0.5 mm² to 2.5 mm²
Connection system: Screw connection
DC input voltage range: 80...370 V DC
Input current: 260 mA @ 115 V AC; 180 mA @ 230 V AC
Input current at 125 Vdc: 125 mA ± 20%
Input current at 250 Vdc: 65 mA ± 20%
Input frequency: 50/ 60 Hz
Input fuse: 2 A time-lag fuse (internal)
Input voltage (voltage mode input): 85...265 V AC, 120...300 V DC
Surge protection: Varistor
Wire connection method: Screw connection
Connection range: 0.5 mm² to 2.5 mm²
Control at 10...100% load: 0.6%
Control at input voltage: 0.2%
Mains failure bridge-over time: 30 ms @ 115 V AC / 80 ms @ 230 V AC
Max. capacitance at output: 8000 µF
Max. residual ripple: 0.1 %
Output current: 0.5 A
Output power: 12 W
Output voltage: 24 V
Output voltage type: DC
Overload protection: Surge current / thermal cut-out
Parallel connection option: No
Rated output voltage: 24 V DC ± 1 %
Surge protection: Varistor
Wire connection method: Screw connection
Degree of efficiency at max. load: 80%
EMC standards: IEC 61000-6 /-2, -3
Low Voltage Directive: 73/ 23/ EWG
Mounting position, installation notice: horizontally, on terminal rail TS 35
Operating temperature: -20 °C...50 °C
Power factor correction: No
Protection degree: IP20
Short-circuit protection: Yes
Standards: DIN EN 50178, DIN EN 60950, IEC950
Status indication: Green LED
Output current: 0.5 A
Humidity at operating temperature: 20 to 85% RH without condensation
Humidity at storage temperature: 20 to 90% RH
electrical isolation, I/O rail: 4 kV
electrical isolation, input-earth: 1.5 kV
electrical isolation, input-output: 3 kV
electrical isolation, output-earth: 0.5 kV
Connection system: Screw connection
Status indication: Green LED
Certificate No. (CSA): 200039-1174514
Certificate no. (cULus): E196651
ETIM 6.0: EC002540
ETIM 7.0: EC002540
eClass 9.0: 27-04-07-01
eClass 9.1: 27-04-07-01
eClass 10.0: 27-04-07-01
UNSPSC: 30-21-18-01
ROHS: Conform

Parametry logistyczne

ECCN:
Kraj pochodzenia: DE
EAN: 4032248217519
Waga: 0,00 kg
Długość: 0,00 m
Szerokość: 0,00 m
Wysokość: 0,00 m