View this page in: English
Email: "ucnguBrctvdgcxgt0eqo"
Wybierz język
1-Click Zapytanie
Produkt
Weidmueller
8951000000
TOP 110VDC/48VDC 0,5A
Poproś o ofertę
Prawa autorskie do obrazu: Weidmueller
Weidmueller 8951000000
TOP 110VDC/48VDC 0,5A
Na prośbę. Prześlij nam wiadomość e-mail z zapytaniem o cenę i dostępność.
"ucnguBrctvdgcxgt0eqo"
Opis
Parametry techniczne
| Type: | TOP 110VDC/48VDC 0,5A |
| Order No.: | 8951000000 |
| Version: | TERMOPTO, solid-state relais, 1 NO contact (Transistor), Rated control voltage: 110 V DC ±20 % , Rated switching voltage: 5...48 V DC, Continuous current: 500 mA, PUSH IN |
| GTIN (EAN): | 4032248742356 |
| Qty.: | 10 pc(s). |
| Width: | 6.1 mm |
| Width (inches): | 0.24 inch |
| Height: | 79.4 mm |
| Height (inches): | 3.126 inch |
| Depth: | 55 mm |
| Depth (inches): | 2.165 inch |
| Net weight: | 18.8 g |
| Operating temperature, max.: | 60 °C |
| Operating temperature, min.: | -20 °C |
| Storage temperature, max.: | 80 °C |
| Storage temperature, min.: | -40 °C |
| Operating temperature: | -20 °C...60 °C |
| Storage temperature: | -40 °C...80 °C |
| MTTF: | 2,500 Years |
| REACH SVHC: | Lead 7439-92-1 |
| Rated control voltage: | 110 V DC ±20 % |
| Nominal control current: | 2.6 mA DC |
| Power rating: | ≤ 280 mW |
| Cut-in / dropout voltage: | 88 V / 27.5 V DC |
| Status indicator: | Green LED |
| Protective circuit: | Varistor, Reverse polarity protection |
| Rated switching voltage: | 5...48 V DC |
| Continuous current: | 500 mA |
| Load category: | DC1 |
| Switch-on delay: | < 18 µs |
| Switch-off delay: | < 340 µs |
| Voltage drop at max. load: | < 1 V |
| Leakage current: | < 10 µA |
| Short-circuit-proof: | No |
| Protective circuit, load side: | Free-wheeling diode |
| max. switching frequency (DC control voltage): | 200 Hz |
| Contact type: | 1 NO contact (Transistor) |
| Rail: | TS 35 |
| Colour: | black |
| UL 94 flammability rating: | V-0 |
| Rated voltage: | 300 V |
| Pollution severity: | 2 |
| Surge voltage category: | III |
| Clearance and creepage distances for control side - load side: | > 3 mm |
| Impulse withstand voltage: | 4 kV (1.2/50 µs) |
| Protection degree: | IP20 |
| Standards: | DIN EN 50178, IEC 62314, UL508 |
| Certificate no. (cULus): | E223474 |
| Wire connection method: | PUSH IN |
| Stripping length, rated connection: | 10 mm |
| Clamping range, rated connection: | 1.5 mm² |
| Clamping range, min.: | 0.5 mm² |
| Clamping range, max.: | 2.5 mm² |
| Wire connection cross section AWG, min.: | AWG 20 |
| Wire connection cross section AWG, max.: | AWG 14 |
| Wire cross-section, solid, min.: | 0.5 mm² |
| Wire cross-section, solid, max.: | 1.5 mm² |
| Wire connection cross-section, finely stranded, min.: | 0.5 mm² |
| Wire connection cross section, finely stranded, max.: | 1.5 mm² |
| Wire cross-section, finely stranded, min. (AWG): | AWG 20 |
| Wire cross-section, finely stranded, max. (AWG): | AWG 14 |
| Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min.: | 0.5 mm² |
| Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max.: | 1.5 mm² |
| Conductor cross-section, flexible, AEH (DIN 46228-1), min.: | 0.5 mm² |
| Conductor cross-section, flexible, AEH (DIN 46228-1), max.: | 1.5 mm² |
| Blade size: | 0.6 x 3.5 mm |
| ETIM 6.0: | EC001504 |
| ETIM 7.0: | EC001504 |
| eClass 9.0: | 27-37-16-04 |
| eClass 9.1: | 27-37-16-04 |
| eClass 10.0: | 27-37-16-04 |
| ROHS: | Conform |
| Type: | TOP 110VDC/48VDC 0,5A |
| Order No.: | 8951000000 |
| Version: | TERMOPTO, solid-state relais, 1 NO contact (Transistor), Rated control voltage: 110 V DC ±20 % , Rated switching voltage: 5...48 V DC, Continuous current: 500 mA, PUSH IN |
| GTIN (EAN): | 4032248742356 |
| Qty.: | 10 pc(s). |
| Width: | 6.1 mm |
| Width (inches): | 0.24 inch |
| Height: | 79.4 mm |
| Height (inches): | 3.126 inch |
| Depth: | 55 mm |
| Depth (inches): | 2.165 inch |
| Net weight: | 18.8 g |
| Operating temperature, max.: | 60 °C |
| Operating temperature, min.: | -20 °C |
| Storage temperature, max.: | 80 °C |
| Storage temperature, min.: | -40 °C |
| Operating temperature: | -20 °C...60 °C |
| Storage temperature: | -40 °C...80 °C |
| MTTF: | 2,500 Years |
| REACH SVHC: | Lead 7439-92-1 |
| Rated control voltage: | 110 V DC ±20 % |
| Nominal control current: | 2.6 mA DC |
| Power rating: | ≤ 280 mW |
| Cut-in / dropout voltage: | 88 V / 27.5 V DC |
| Status indicator: | Green LED |
| Protective circuit: | Varistor, Reverse polarity protection |
| Rated switching voltage: | 5...48 V DC |
| Continuous current: | 500 mA |
| Load category: | DC1 |
| Switch-on delay: | < 18 µs |
| Switch-off delay: | < 340 µs |
| Voltage drop at max. load: | < 1 V |
| Leakage current: | < 10 µA |
| Short-circuit-proof: | No |
| Protective circuit, load side: | Free-wheeling diode |
| max. switching frequency (DC control voltage): | 200 Hz |
| Contact type: | 1 NO contact (Transistor) |
| Rail: | TS 35 |
| Colour: | black |
| UL 94 flammability rating: | V-0 |
| Rated voltage: | 300 V |
| Pollution severity: | 2 |
| Surge voltage category: | III |
| Clearance and creepage distances for control side - load side: | > 3 mm |
| Impulse withstand voltage: | 4 kV (1.2/50 µs) |
| Protection degree: | IP20 |
| Standards: | DIN EN 50178, IEC 62314, UL508 |
| Certificate no. (cULus): | E223474 |
| Wire connection method: | PUSH IN |
| Stripping length, rated connection: | 10 mm |
| Clamping range, rated connection: | 1.5 mm² |
| Clamping range, min.: | 0.5 mm² |
| Clamping range, max.: | 2.5 mm² |
| Wire connection cross section AWG, min.: | AWG 20 |
| Wire connection cross section AWG, max.: | AWG 14 |
| Wire cross-section, solid, min.: | 0.5 mm² |
| Wire cross-section, solid, max.: | 1.5 mm² |
| Wire connection cross-section, finely stranded, min.: | 0.5 mm² |
| Wire connection cross section, finely stranded, max.: | 1.5 mm² |
| Wire cross-section, finely stranded, min. (AWG): | AWG 20 |
| Wire cross-section, finely stranded, max. (AWG): | AWG 14 |
| Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min.: | 0.5 mm² |
| Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max.: | 1.5 mm² |
| Conductor cross-section, flexible, AEH (DIN 46228-1), min.: | 0.5 mm² |
| Conductor cross-section, flexible, AEH (DIN 46228-1), max.: | 1.5 mm² |
| Blade size: | 0.6 x 3.5 mm |
| ETIM 6.0: | EC001504 |
| ETIM 7.0: | EC001504 |
| eClass 9.0: | 27-37-16-04 |
| eClass 9.1: | 27-37-16-04 |
| eClass 10.0: | 27-37-16-04 |
| ROHS: | Conform |
Parametry logistyczne
| ECCN: | |
| Kraj pochodzenia: | |
| EAN: | |
| Waga: | 0,02 kg |
| Długość: | 0,00 m |
| Szerokość: | 0,00 m |
| Wysokość: | 0,00 m |