View this page in: English
Email: "ucnguBrctvdgcxgt0eqo"
Wybierz język
1-Click Zapytanie
Produkt
Weidmueller
8581180000
WAS4 PRO FREQ
Poproś o ofertę
Prawa autorskie do obrazu: Weidmueller
Weidmueller 8581180000
WAS4 PRO FREQ
Na prośbę. Prześlij nam wiadomość e-mail z zapytaniem o cenę i dostępność.
"ucnguBrctvdgcxgt0eqo"
Opis
Parametry techniczne
| Delivery status: | This article will no longer be available in the future. |
| Available until: | 2020-12-31 |
| Type: | WAS4 PRO FREQ |
| Order No.: | 8581180000 |
| Version: | Frequency signal isolating transformer, Screw connection |
| GTIN (EAN): | 4032248234486 |
| Qty.: | 1 pc(s). |
| Length: | 92.4 mm |
| Length (inches): | 3.638 inch |
| Width: | 12.5 mm |
| Width (inches): | 0.492 inch |
| Depth: | 112.4 mm |
| Depth (inches): | 4.425 inch |
| Net weight: | 118.7 g |
| Operating temperature, max.: | 55 °C |
| Operating temperature, min.: | 0 °C |
| Storage temperature, max.: | 85 °C |
| Storage temperature, min.: | -20 °C |
| Operating temperature: | 0 °C...55 °C |
| Storage temperature: | -20 °C...85 °C |
| MTTF: | 458 Years |
| REACH SVHC: | Lead 7439-92-1 |
| Number of inputs: | 1 |
| Sensor: | 2-, 3-wire PNP/NPN, Namur initiator, push-pull step, Frequency |
| Sensor supply: | 16 V DC @ max. 15 mA |
| Rated input level: | Threshold/hysteresis: Namur: approx. 1.7 mA/approx. 0.2 mA; NPN: approx. 6.5 V/approx. 0.2 V; PNP: approx. 6,7 V/approx. 0.5 V |
| Input frequency: | 0…100kHz, adjustable |
| Number of outputs: | 1 |
| Output voltage, note: | 0...5 V, 0...10 V, Adjustable |
| Output current: | 0...20 mA, 4...20 mA, Adjustable |
| load impedance voltage: | ≥ 1 kΩ |
| Load impedance current: | ≤ 600 Ω |
| Offset voltage: | max. 0.05 V |
| Offset current: | max. 100 µA |
| Status indicator: | Green LED |
| Accuracy: | < 0.2% of output range |
| Configuration: | DIP switch (measurement range 0...15900 Hz), Frequency generator (measurement range 0...100 kHz) |
| Current-carrying capacity of cross-connect.: | ≤ 2 A |
| Galvanic isolation: | 3-way isolator |
| Input/Output: | configurable |
| Rail: | TS 35 |
| Step response time: | 360 ms + 2 times the period time of input frequency |
| Temperature coefficient: | max. 200 ppm/K of output range |
| Voltage supply: | 24 V DC ± 25 % |
| Clearance & creepage distances: | ≥ 5.5 mm |
| EMC standards: | EN 55011, EN 61000-6, EN 61326 |
| Galvanic isolation: | 3-way isolator |
| Impulse withstand voltage: | 6 kV |
| Pollution severity: | 2 |
| Rated voltage: | 300 V |
| Surge voltage category: | III |
| Type of connection: | Screw connection |
| Stripping length, rated connection: | 7 mm |
| Tightening torque, min.: | 0.4 Nm |
| Tightening torque, max.: | 0.5 Nm |
| Clamping range, rated connection: | 2.5 mm² |
| Clamping range, min.: | 0.5 mm² |
| Clamping range, max.: | 2.5 mm² |
| ETIM 6.0: | EC002918 |
| ETIM 7.0: | EC002918 |
| eClass 9.0: | 27-21-01-28 |
| eClass 9.1: | 27-21-01-28 |
| eClass 10.0: | 27-21-01-28 |
| ROHS: | Conform |
| Delivery status: | This article will no longer be available in the future. |
| Available until: | 2020-12-31 |
| Type: | WAS4 PRO FREQ |
| Order No.: | 8581180000 |
| Version: | Frequency signal isolating transformer, Screw connection |
| GTIN (EAN): | 4032248234486 |
| Qty.: | 1 pc(s). |
| Length: | 92.4 mm |
| Length (inches): | 3.638 inch |
| Width: | 12.5 mm |
| Width (inches): | 0.492 inch |
| Depth: | 112.4 mm |
| Depth (inches): | 4.425 inch |
| Net weight: | 118.7 g |
| Operating temperature, max.: | 55 °C |
| Operating temperature, min.: | 0 °C |
| Storage temperature, max.: | 85 °C |
| Storage temperature, min.: | -20 °C |
| Operating temperature: | 0 °C...55 °C |
| Storage temperature: | -20 °C...85 °C |
| MTTF: | 458 Years |
| REACH SVHC: | Lead 7439-92-1 |
| Number of inputs: | 1 |
| Sensor: | 2-, 3-wire PNP/NPN, Namur initiator, push-pull step, Frequency |
| Sensor supply: | 16 V DC @ max. 15 mA |
| Rated input level: | Threshold/hysteresis: Namur: approx. 1.7 mA/approx. 0.2 mA; NPN: approx. 6.5 V/approx. 0.2 V; PNP: approx. 6,7 V/approx. 0.5 V |
| Input frequency: | 0…100kHz, adjustable |
| Number of outputs: | 1 |
| Output voltage, note: | 0...5 V, 0...10 V, Adjustable |
| Output current: | 0...20 mA, 4...20 mA, Adjustable |
| load impedance voltage: | ≥ 1 kΩ |
| Load impedance current: | ≤ 600 Ω |
| Offset voltage: | max. 0.05 V |
| Offset current: | max. 100 µA |
| Status indicator: | Green LED |
| Accuracy: | < 0.2% of output range |
| Configuration: | DIP switch (measurement range 0...15900 Hz), Frequency generator (measurement range 0...100 kHz) |
| Current-carrying capacity of cross-connect.: | ≤ 2 A |
| Galvanic isolation: | 3-way isolator |
| Input/Output: | configurable |
| Rail: | TS 35 |
| Step response time: | 360 ms + 2 times the period time of input frequency |
| Temperature coefficient: | max. 200 ppm/K of output range |
| Voltage supply: | 24 V DC ± 25 % |
| Clearance & creepage distances: | ≥ 5.5 mm |
| EMC standards: | EN 55011, EN 61000-6, EN 61326 |
| Galvanic isolation: | 3-way isolator |
| Impulse withstand voltage: | 6 kV |
| Pollution severity: | 2 |
| Rated voltage: | 300 V |
| Surge voltage category: | III |
| Type of connection: | Screw connection |
| Stripping length, rated connection: | 7 mm |
| Tightening torque, min.: | 0.4 Nm |
| Tightening torque, max.: | 0.5 Nm |
| Clamping range, rated connection: | 2.5 mm² |
| Clamping range, min.: | 0.5 mm² |
| Clamping range, max.: | 2.5 mm² |
| ETIM 6.0: | EC002918 |
| ETIM 7.0: | EC002918 |
| eClass 9.0: | 27-21-01-28 |
| eClass 9.1: | 27-21-01-28 |
| eClass 10.0: | 27-21-01-28 |
| ROHS: | Conform |
Parametry logistyczne
| ECCN: | |
| Kraj pochodzenia: | |
| EAN: | |
| Waga: | 0,124 kg |
| Długość: | 0,00 m |
| Szerokość: | 0,00 m |
| Wysokość: | 0,00 m |