8461480000
MCZ CFC 0-20MA
| Type: | MCZ CFC 0-20MA |
| Order No.: | 8461480000 |
| Version: | DC/f transformer, Input : 0-20 mA, Output frequency: 0...1/ 4/ 8/ 16 kHz |
| GTIN (EAN): | 4032248037780 |
| Qty.: | 10 pc(s). |
| Length: | 91 mm |
| Length (inches): | 3.583 inch |
| Width: | 6 mm |
| Width (inches): | 0.236 inch |
| Depth: | 63.2 mm |
| Depth (inches): | 2.488 inch |
| Net weight: | 28.3 g |
| Operating temperature, max.: | 50 °C |
| Operating temperature, min.: | 0 °C |
| Storage temperature, max.: | 85 °C |
| Storage temperature, min.: | -20 °C |
| Operating temperature: | 0 °C...50 °C |
| Storage temperature: | -20 °C...85 °C |
| REACH SVHC: | Lead 7439-92-1 |
| Number of inputs: | 1 |
| Input current: | 0...20 mA |
| Input resistance, current: | 50 Ω |
| Voltage drop: | 1 V at 20 mA |
| Number of outputs: | 1 |
| Output frequency: | 0...1/ 4/ 8/ 16 kHz |
| Output level: | PNP, Ub-0.7 V |
| Output current: | max. 20 mA |
| Load impedance current: | ≤ 600 Ω |
| Status indicator: | LED, pulsing |
| Accuracy: | 0.2 % v. FSR |
| Configuration: | DIP switch |
| Current consumption: | 14 mA without load |
| Current-carrying capacity of cross-connect.: | ≤ 20 A |
| Galvanic isolation: | between input ⁄ output ⁄ supply |
| Input/Output: | DC/ f |
| Rail: | TS 35 |
| Temperature coefficient: | ≤ 250 ppm/K |
| Voltage supply: | 24 V DC ± 10 % |
| Clearance & creepage distances: | ≥ 1.5 mm |
| EMC standards: | EN 55011, EN 61000-6 |
| Galvanic isolation: | between input ⁄ output ⁄ supply |
| Impulse withstand voltage: | 1.5 kV |
| Insulation voltage: | 1 kV DC |
| Pollution severity: | 2 |
| Rated voltage: | 100 V |
| Surge voltage category: | III |
| Type of connection: | Tension-clamp connection |
| Clamping range, rated connection: | 1.5 mm² |
| Clamping range, min.: | 0.5 mm² |
| Clamping range, max.: | 1.5 mm² |
| Wire connection cross section AWG, min.: | AWG 26 |
| Wire connection cross section AWG, max.: | AWG 16 |
| Wire cross-section, solid, min.: | 0.5 mm² |
| Wire cross-section, solid, max.: | 1.5 mm² |
| Wire connection cross-section, finely stranded, min.: | 0.5 mm² |
| Wire connection cross section, finely stranded, max.: | 1.5 mm² |
| Wire cross-section, finely stranded, min. (AWG): | AWG 26 |
| Wire cross-section, finely stranded, max. (AWG): | AWG 16 |
| Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min.: | 0.5 mm² |
| Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max.: | 1.5 mm² |
| Conductor cross-section, flexible, AEH (DIN 46228-1), min.: | 0.5 mm² |
| Conductor cross-section, flexible, AEH (DIN 46228-1), max.: | 1.5 mm² |
| ETIM 6.0: | EC002918 |
| ETIM 7.0: | EC002918 |
| eClass 9.0: | 27-21-01-28 |
| eClass 9.1: | 27-21-01-28 |
| eClass 10.0: | 27-21-01-28 |
| UNSPSC: | 31-12-10-07 |
| ROHS: | Conform |
| Type: | MCZ CFC 0-20MA |
| Order No.: | 8461480000 |
| Version: | DC/f transformer, Input : 0-20 mA, Output frequency: 0...1/ 4/ 8/ 16 kHz |
| GTIN (EAN): | 4032248037780 |
| Qty.: | 10 pc(s). |
| Length: | 91 mm |
| Length (inches): | 3.583 inch |
| Width: | 6 mm |
| Width (inches): | 0.236 inch |
| Depth: | 63.2 mm |
| Depth (inches): | 2.488 inch |
| Net weight: | 28.3 g |
| Operating temperature, max.: | 50 °C |
| Operating temperature, min.: | 0 °C |
| Storage temperature, max.: | 85 °C |
| Storage temperature, min.: | -20 °C |
| Operating temperature: | 0 °C...50 °C |
| Storage temperature: | -20 °C...85 °C |
| REACH SVHC: | Lead 7439-92-1 |
| Number of inputs: | 1 |
| Input current: | 0...20 mA |
| Input resistance, current: | 50 Ω |
| Voltage drop: | 1 V at 20 mA |
| Number of outputs: | 1 |
| Output frequency: | 0...1/ 4/ 8/ 16 kHz |
| Output level: | PNP, Ub-0.7 V |
| Output current: | max. 20 mA |
| Load impedance current: | ≤ 600 Ω |
| Status indicator: | LED, pulsing |
| Accuracy: | 0.2 % v. FSR |
| Configuration: | DIP switch |
| Current consumption: | 14 mA without load |
| Current-carrying capacity of cross-connect.: | ≤ 20 A |
| Galvanic isolation: | between input ⁄ output ⁄ supply |
| Input/Output: | DC/ f |
| Rail: | TS 35 |
| Temperature coefficient: | ≤ 250 ppm/K |
| Voltage supply: | 24 V DC ± 10 % |
| Clearance & creepage distances: | ≥ 1.5 mm |
| EMC standards: | EN 55011, EN 61000-6 |
| Galvanic isolation: | between input ⁄ output ⁄ supply |
| Impulse withstand voltage: | 1.5 kV |
| Insulation voltage: | 1 kV DC |
| Pollution severity: | 2 |
| Rated voltage: | 100 V |
| Surge voltage category: | III |
| Type of connection: | Tension-clamp connection |
| Clamping range, rated connection: | 1.5 mm² |
| Clamping range, min.: | 0.5 mm² |
| Clamping range, max.: | 1.5 mm² |
| Wire connection cross section AWG, min.: | AWG 26 |
| Wire connection cross section AWG, max.: | AWG 16 |
| Wire cross-section, solid, min.: | 0.5 mm² |
| Wire cross-section, solid, max.: | 1.5 mm² |
| Wire connection cross-section, finely stranded, min.: | 0.5 mm² |
| Wire connection cross section, finely stranded, max.: | 1.5 mm² |
| Wire cross-section, finely stranded, min. (AWG): | AWG 26 |
| Wire cross-section, finely stranded, max. (AWG): | AWG 16 |
| Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min.: | 0.5 mm² |
| Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max.: | 1.5 mm² |
| Conductor cross-section, flexible, AEH (DIN 46228-1), min.: | 0.5 mm² |
| Conductor cross-section, flexible, AEH (DIN 46228-1), max.: | 1.5 mm² |
| ETIM 6.0: | EC002918 |
| ETIM 7.0: | EC002918 |
| eClass 9.0: | 27-21-01-28 |
| eClass 9.1: | 27-21-01-28 |
| eClass 10.0: | 27-21-01-28 |
| UNSPSC: | 31-12-10-07 |
| ROHS: | Conform |
| ECCN: | |
| Kraj pochodzenia: | |
| EAN: | |
| Waga: | 0,03 kg |
| Długość: | 0,00 m |
| Szerokość: | 0,00 m |
| Wysokość: | 0,00 m |