View this page in: English
Email: "ucnguBrctvdgcxgt0eqo"
Wybierz język
1-Click Zapytanie
Produkt
Weidmueller
8287730000
MCZ O 24VUC
Poproś o ofertę
Prawa autorskie do obrazu: Weidmueller
Weidmueller 8287730000
MCZ O 24VUC
Na prośbę. Prześlij nam wiadomość e-mail z zapytaniem o cenę i dostępność.
"ucnguBrctvdgcxgt0eqo"
Opis
Parametry techniczne
| Type: | MCZ O 24VUC |
| Order No.: | 8287730000 |
| Version: | MCZ SERIES, solid-state relais, 1 NO contact (Transistor), Rated control voltage: 24 V UC ±20 % , Rated switching voltage: 24 VDC ±20%, Continuous current: 2 A, Tension-clamp connection |
| GTIN (EAN): | 4008190985400 |
| Qty.: | 10 pc(s). |
| Width: | 6.1 mm |
| Width (inches): | 0.24 inch |
| Height: | 91 mm |
| Height (inches): | 3.583 inch |
| Depth: | 63.2 mm |
| Depth (inches): | 2.488 inch |
| Net weight: | 22.6 g |
| Humidity: | 40 °C / 93 % rel. humidity, no condensation |
| Operating temperature, max.: | 40 °C |
| Operating temperature, min.: | -25 °C |
| Storage temperature, max.: | 60 °C |
| Storage temperature, min.: | -40 °C |
| Operating temperature: | -25 °C...40 °C |
| Storage temperature: | -40 °C...60 °C |
| MTTF: | 1,430 Years |
| REACH SVHC: | Lead 7439-92-1 |
| Certificate No. (cURus): | E141197 |
| Rated control voltage: | 24 V UC ±20 % |
| Nominal control current: | 10 mA DC ±20 %, 10 mA AC ±20 % |
| Power rating: | 195 mW / 220 mVA |
| Status indicator: | LED |
| Protective circuit: | Rectifier |
| Rated switching voltage: | 24 VDC ±20% |
| Continuous current: | 2 A |
| Switch-on delay: | ≤ 10 ms |
| Switch-off delay: | ≤ 10 ms |
| Voltage drop at max. load: | ≤ 1.8 V |
| Short-circuit-proof: | Yes |
| Protective circuit, load side: | Varistor |
| max. switching frequency (AC control voltage): | 10 Hz |
| max. switching frequency (DC control voltage): | 30 Hz |
| Nominal auxiliary voltage: | 24 V DC ± 20 % |
| Contact type: | 1 NO contact (Transistor) |
| Rail: | TS 35 |
| Colour: | beige |
| UL 94 flammability rating: | V-0 |
| Rated voltage: | 300 V |
| Pollution severity: | 2 |
| Surge voltage category: | III |
| Clearance and creepage distances for control side - load side: | ≥ 5.5 mm |
| Impulse withstand voltage: | 6 kV (1.2/50 µs) |
| Protection degree: | IP20 |
| Standards: | DIN EN 50178, UL508 |
| Certificate No. (CSA): | 154685-1198742 |
| Certificate No. (cURus): | E141197 |
| Wire connection method: | Tension-clamp connection |
| Stripping length, rated connection: | 8 mm |
| Clamping range, rated connection: | 1.5 mm² |
| Clamping range, min.: | 0.5 mm² |
| Clamping range, max.: | 1.5 mm² |
| Wire connection cross section AWG, min.: | AWG 26 |
| Wire connection cross section AWG, max.: | AWG 16 |
| Wire cross-section, solid, min.: | 0.5 mm² |
| Wire cross-section, solid, max.: | 1.5 mm² |
| Wire connection cross-section, finely stranded, min.: | 0.5 mm² |
| Wire connection cross section, finely stranded, max.: | 1.5 mm² |
| Wire cross-section, finely stranded, min. (AWG): | AWG 26 |
| Wire cross-section, finely stranded, max. (AWG): | AWG 16 |
| Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min.: | 0.5 mm² |
| Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max.: | 1.5 mm² |
| Conductor cross-section, flexible, AEH (DIN 46228-1), min.: | 0.5 mm² |
| Conductor cross-section, flexible, AEH (DIN 46228-1), max.: | 1.5 mm² |
| Blade size: | 0.6 x 3.5 mm |
| ETIM 6.0: | EC001504 |
| ETIM 7.0: | EC001504 |
| eClass 9.0: | 27-37-16-04 |
| eClass 9.1: | 27-37-16-04 |
| eClass 10.0: | 27-37-16-04 |
| UNSPSC: | 30-21-18-01 |
| ROHS: | Conform |
| Type: | MCZ O 24VUC |
| Order No.: | 8287730000 |
| Version: | MCZ SERIES, solid-state relais, 1 NO contact (Transistor), Rated control voltage: 24 V UC ±20 % , Rated switching voltage: 24 VDC ±20%, Continuous current: 2 A, Tension-clamp connection |
| GTIN (EAN): | 4008190985400 |
| Qty.: | 10 pc(s). |
| Width: | 6.1 mm |
| Width (inches): | 0.24 inch |
| Height: | 91 mm |
| Height (inches): | 3.583 inch |
| Depth: | 63.2 mm |
| Depth (inches): | 2.488 inch |
| Net weight: | 22.6 g |
| Humidity: | 40 °C / 93 % rel. humidity, no condensation |
| Operating temperature, max.: | 40 °C |
| Operating temperature, min.: | -25 °C |
| Storage temperature, max.: | 60 °C |
| Storage temperature, min.: | -40 °C |
| Operating temperature: | -25 °C...40 °C |
| Storage temperature: | -40 °C...60 °C |
| MTTF: | 1,430 Years |
| REACH SVHC: | Lead 7439-92-1 |
| Certificate No. (cURus): | E141197 |
| Rated control voltage: | 24 V UC ±20 % |
| Nominal control current: | 10 mA DC ±20 %, 10 mA AC ±20 % |
| Power rating: | 195 mW / 220 mVA |
| Status indicator: | LED |
| Protective circuit: | Rectifier |
| Rated switching voltage: | 24 VDC ±20% |
| Continuous current: | 2 A |
| Switch-on delay: | ≤ 10 ms |
| Switch-off delay: | ≤ 10 ms |
| Voltage drop at max. load: | ≤ 1.8 V |
| Short-circuit-proof: | Yes |
| Protective circuit, load side: | Varistor |
| max. switching frequency (AC control voltage): | 10 Hz |
| max. switching frequency (DC control voltage): | 30 Hz |
| Nominal auxiliary voltage: | 24 V DC ± 20 % |
| Contact type: | 1 NO contact (Transistor) |
| Rail: | TS 35 |
| Colour: | beige |
| UL 94 flammability rating: | V-0 |
| Rated voltage: | 300 V |
| Pollution severity: | 2 |
| Surge voltage category: | III |
| Clearance and creepage distances for control side - load side: | ≥ 5.5 mm |
| Impulse withstand voltage: | 6 kV (1.2/50 µs) |
| Protection degree: | IP20 |
| Standards: | DIN EN 50178, UL508 |
| Certificate No. (CSA): | 154685-1198742 |
| Certificate No. (cURus): | E141197 |
| Wire connection method: | Tension-clamp connection |
| Stripping length, rated connection: | 8 mm |
| Clamping range, rated connection: | 1.5 mm² |
| Clamping range, min.: | 0.5 mm² |
| Clamping range, max.: | 1.5 mm² |
| Wire connection cross section AWG, min.: | AWG 26 |
| Wire connection cross section AWG, max.: | AWG 16 |
| Wire cross-section, solid, min.: | 0.5 mm² |
| Wire cross-section, solid, max.: | 1.5 mm² |
| Wire connection cross-section, finely stranded, min.: | 0.5 mm² |
| Wire connection cross section, finely stranded, max.: | 1.5 mm² |
| Wire cross-section, finely stranded, min. (AWG): | AWG 26 |
| Wire cross-section, finely stranded, max. (AWG): | AWG 16 |
| Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min.: | 0.5 mm² |
| Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max.: | 1.5 mm² |
| Conductor cross-section, flexible, AEH (DIN 46228-1), min.: | 0.5 mm² |
| Conductor cross-section, flexible, AEH (DIN 46228-1), max.: | 1.5 mm² |
| Blade size: | 0.6 x 3.5 mm |
| ETIM 6.0: | EC001504 |
| ETIM 7.0: | EC001504 |
| eClass 9.0: | 27-37-16-04 |
| eClass 9.1: | 27-37-16-04 |
| eClass 10.0: | 27-37-16-04 |
| UNSPSC: | 30-21-18-01 |
| ROHS: | Conform |
Parametry logistyczne
| ECCN: | |
| Kraj pochodzenia: | |
| EAN: | |
| Waga: | 0,026 kg |
| Długość: | 0,00 m |
| Szerokość: | 0,00 m |
| Wysokość: | 0,00 m |