View this page in: English
Email: "ucnguBrctvdgcxgt0eqo"
Wybierz język
1-Click Zapytanie
Produkt
Weidmueller
7760054303
EPAK-TMR-PT100-S
Poproś o ofertę
Prawa autorskie do obrazu: Weidmueller
Weidmueller 7760054303
EPAK-TMR-PT100-S
Na prośbę. Prześlij nam wiadomość e-mail z zapytaniem o cenę i dostępność.
"ucnguBrctvdgcxgt0eqo"
Opis
Parametry techniczne
| Type: | EPAK-TMR-PT100-S |
| Order No.: | 7760054303 |
| GTIN (EAN): | 6944169742446 |
| Qty.: | 1 pc(s). |
| Length: | 100 mm |
| Length (inches): | 3.937 inch |
| Width: | 17.5 |
| Width (inches): | 0.689 inch |
| Depth: | 89 mm |
| Depth (inches): | 3.504 inch |
| Net weight: | 80 g |
| Operating temperature, max.: | 60 °C |
| Operating temperature, min.: | -20 °C |
| Storage temperature, max.: | 85 °C |
| Storage temperature, min.: | -40 °C |
| Operating temperature: | -20 °C...60 °C |
| Storage temperature: | -40 °C...85 °C |
| REACH SVHC: | Lead 7439-92-1 |
| Sensor: | PT100 / 2-/3-/4-wire |
| Temperature input range: | PT1000: -200°C…850 °C, Range is factory set (Please specify the temperature range with the order) |
| Accuracy: | 0.2% FSR |
| Configuration: | Factory setting |
| Galvanic isolation: | between input/output |
| Power consumption: | <60mA @ 24VDC |
| Step response time: | ≤ 200 ms (10…90%) |
| Temperature coefficient: | ≤ 150 ppm/K |
| Voltage supply: | 18…30 VDC |
| EMC standards: | EN 61000-6-2, EN 61000-6-4 |
| Galvanic isolation: | between input/output |
| Impulse withstand voltage: | 4 kV (1.2/50 µs) |
| Insulation voltage: | 2.2 kVAC, 1 min, 50 Hz |
| Pollution severity: | 2 |
| Surge voltage category: | II |
| Alarm function: | as per factory setting, Top and bottom limit values, window range, Alarm delay: 0…10 s, Hysteresis: 5 °C |
| Type: | Relay, 1 CO contact |
| Max. switching voltage, DC: | 30 V |
| Max. switching voltage, AC: | 250 V |
| Rated switching current: | 3 A |
| Type of connection: | Screw connection |
| Tightening torque, min.: | 0.4 Nm |
| Tightening torque, max.: | 0.6 Nm |
| Clamping range, rated connection: | 2 mm² |
| Clamping range, min.: | 0.5 mm² |
| Clamping range, max.: | 2 mm² |
| Wire connection cross section AWG, min.: | AWG 30 |
| Wire connection cross section AWG, max.: | AWG 14 |
| ETIM 6.0: | EC002919 |
| ETIM 7.0: | EC002919 |
| eClass 9.0: | 27-21-01-29 |
| eClass 9.1: | 27-21-01-29 |
| eClass 10.0: | 27-21-01-29 |
| ROHS: | Conform |
| Type: | EPAK-TMR-PT100-S |
| Order No.: | 7760054303 |
| GTIN (EAN): | 6944169742446 |
| Qty.: | 1 pc(s). |
| Length: | 100 mm |
| Length (inches): | 3.937 inch |
| Width: | 17.5 |
| Width (inches): | 0.689 inch |
| Depth: | 89 mm |
| Depth (inches): | 3.504 inch |
| Net weight: | 80 g |
| Operating temperature, max.: | 60 °C |
| Operating temperature, min.: | -20 °C |
| Storage temperature, max.: | 85 °C |
| Storage temperature, min.: | -40 °C |
| Operating temperature: | -20 °C...60 °C |
| Storage temperature: | -40 °C...85 °C |
| REACH SVHC: | Lead 7439-92-1 |
| Sensor: | PT100 / 2-/3-/4-wire |
| Temperature input range: | PT1000: -200°C…850 °C, Range is factory set (Please specify the temperature range with the order) |
| Accuracy: | 0.2% FSR |
| Configuration: | Factory setting |
| Galvanic isolation: | between input/output |
| Power consumption: | <60mA @ 24VDC |
| Step response time: | ≤ 200 ms (10…90%) |
| Temperature coefficient: | ≤ 150 ppm/K |
| Voltage supply: | 18…30 VDC |
| EMC standards: | EN 61000-6-2, EN 61000-6-4 |
| Galvanic isolation: | between input/output |
| Impulse withstand voltage: | 4 kV (1.2/50 µs) |
| Insulation voltage: | 2.2 kVAC, 1 min, 50 Hz |
| Pollution severity: | 2 |
| Surge voltage category: | II |
| Alarm function: | as per factory setting, Top and bottom limit values, window range, Alarm delay: 0…10 s, Hysteresis: 5 °C |
| Type: | Relay, 1 CO contact |
| Max. switching voltage, DC: | 30 V |
| Max. switching voltage, AC: | 250 V |
| Rated switching current: | 3 A |
| Type of connection: | Screw connection |
| Tightening torque, min.: | 0.4 Nm |
| Tightening torque, max.: | 0.6 Nm |
| Clamping range, rated connection: | 2 mm² |
| Clamping range, min.: | 0.5 mm² |
| Clamping range, max.: | 2 mm² |
| Wire connection cross section AWG, min.: | AWG 30 |
| Wire connection cross section AWG, max.: | AWG 14 |
| ETIM 6.0: | EC002919 |
| ETIM 7.0: | EC002919 |
| eClass 9.0: | 27-21-01-29 |
| eClass 9.1: | 27-21-01-29 |
| eClass 10.0: | 27-21-01-29 |
| ROHS: | Conform |
Parametry logistyczne
| ECCN: | |
| Kraj pochodzenia: | |
| EAN: | |
| Waga: | 0,119 kg |
| Długość: | 0,00 m |
| Szerokość: | 0,00 m |
| Wysokość: | 0,00 m |