7760054300
EPAK-CM-CO-H
| Type: | EPAK-CM-CO-H |
| Order No.: | 7760054300 |
| GTIN (EAN): | 6944169742385 |
| Qty.: | 1 pc(s). |
| Length: | 100 mm |
| Length (inches): | 3.937 inch |
| Width: | 17.5 |
| Width (inches): | 0.689 inch |
| Depth: | 89 mm |
| Depth (inches): | 3.504 inch |
| Net weight: | 80 g |
| Operating temperature, max.: | 60 °C |
| Operating temperature, min.: | -20 °C |
| Storage temperature, max.: | 85 °C |
| Storage temperature, min.: | -40 °C |
| Operating temperature: | -20 °C...60 °C |
| Storage temperature: | -40 °C...85 °C |
| REACH SVHC: | Lead 7439-92-1 |
| Input signal: | AC (sine), DC |
| Input current: | 0.1…1A AC/DC, 0.5…5A AC/DC |
| Input frequency: | 40…60 Hz |
| Output current: | 4...20 mA, Alarm output: 22 mA (measurement range exceeded / incorrect input type) |
| Load impedance current: | ≤ 500 Ω |
| Accuracy: | ± 0.5 % of measuring range |
| Galvanic isolation: | between input ⁄ output ⁄ supply |
| Power consumption: | ≤ 100 mA @ 24 VDC |
| Step response time: | ≤ 300 ms (RMS) |
| Temperature coefficient: | ≤ 250 ppm/K |
| Voltage supply: | 18…30 VDC |
| EMC standards: | IEC 61000-6 /-2, IEC 61000-6-4 |
| Galvanic isolation: | between input ⁄ output ⁄ supply |
| Impulse withstand voltage: | 4 kV (1.2/50 µs) |
| Insulation voltage: | 2.2 kVAC, 1 min, 50 Hz |
| Pollution severity: | 2 |
| Surge voltage category: | II |
| Type of connection: | Screw connection |
| Tightening torque, min.: | 0.4 Nm |
| Tightening torque, max.: | 0.6 Nm |
| Clamping range, rated connection: | 2 mm² |
| Clamping range, min.: | 0.5 mm² |
| Clamping range, max.: | 2 mm² |
| Wire connection cross section AWG, min.: | AWG 30 |
| Wire connection cross section AWG, max.: | AWG 14 |
| ETIM 6.0: | EC002653 |
| ETIM 7.0: | EC002653 |
| eClass 9.0: | 27-21-01-20 |
| eClass 9.1: | 27-21-01-90 |
| eClass 10.0: | 27-21-01-20 |
| ROHS: | Conform |
| Type: | EPAK-CM-CO-H |
| Order No.: | 7760054300 |
| GTIN (EAN): | 6944169742385 |
| Qty.: | 1 pc(s). |
| Length: | 100 mm |
| Length (inches): | 3.937 inch |
| Width: | 17.5 |
| Width (inches): | 0.689 inch |
| Depth: | 89 mm |
| Depth (inches): | 3.504 inch |
| Net weight: | 80 g |
| Operating temperature, max.: | 60 °C |
| Operating temperature, min.: | -20 °C |
| Storage temperature, max.: | 85 °C |
| Storage temperature, min.: | -40 °C |
| Operating temperature: | -20 °C...60 °C |
| Storage temperature: | -40 °C...85 °C |
| REACH SVHC: | Lead 7439-92-1 |
| Input signal: | AC (sine), DC |
| Input current: | 0.1…1A AC/DC, 0.5…5A AC/DC |
| Input frequency: | 40…60 Hz |
| Output current: | 4...20 mA, Alarm output: 22 mA (measurement range exceeded / incorrect input type) |
| Load impedance current: | ≤ 500 Ω |
| Accuracy: | ± 0.5 % of measuring range |
| Galvanic isolation: | between input ⁄ output ⁄ supply |
| Power consumption: | ≤ 100 mA @ 24 VDC |
| Step response time: | ≤ 300 ms (RMS) |
| Temperature coefficient: | ≤ 250 ppm/K |
| Voltage supply: | 18…30 VDC |
| EMC standards: | IEC 61000-6 /-2, IEC 61000-6-4 |
| Galvanic isolation: | between input ⁄ output ⁄ supply |
| Impulse withstand voltage: | 4 kV (1.2/50 µs) |
| Insulation voltage: | 2.2 kVAC, 1 min, 50 Hz |
| Pollution severity: | 2 |
| Surge voltage category: | II |
| Type of connection: | Screw connection |
| Tightening torque, min.: | 0.4 Nm |
| Tightening torque, max.: | 0.6 Nm |
| Clamping range, rated connection: | 2 mm² |
| Clamping range, min.: | 0.5 mm² |
| Clamping range, max.: | 2 mm² |
| Wire connection cross section AWG, min.: | AWG 30 |
| Wire connection cross section AWG, max.: | AWG 14 |
| ETIM 6.0: | EC002653 |
| ETIM 7.0: | EC002653 |
| eClass 9.0: | 27-21-01-20 |
| eClass 9.1: | 27-21-01-90 |
| eClass 10.0: | 27-21-01-20 |
| ROHS: | Conform |
| ECCN: | |
| Kraj pochodzenia: | |
| EAN: | |
| Waga: | 0,106 kg |
| Długość: | 0,00 m |
| Szerokość: | 0,00 m |
| Wysokość: | 0,00 m |