View this page in: English
Email: "ucnguBrctvdgcxgt0eqo"
Wybierz język
1-Click Zapytanie
Produkt
Weidmueller
7760054123
ACT20P-CI-CO-ILP-S
Poproś o ofertę
Prawa autorskie do obrazu: Weidmueller
Weidmueller 7760054123
ACT20P-CI-CO-ILP-S
Na prośbę. Prześlij nam wiadomość e-mail z zapytaniem o cenę i dostępność.
"ucnguBrctvdgcxgt0eqo"
Opis
Parametry techniczne
| Type: | ACT20P-CI-CO-ILP-S |
| Order No.: | 7760054123 |
| Version: | Signal converter/isolator, Input current loop feed, Input : 0(4)-20 mA, (loop powered), Output : 0(4)-20 mA |
| GTIN (EAN): | 6944169656637 |
| Qty.: | 1 pc(s). |
| Width: | 12.5 |
| Width (inches): | 0.492 inch |
| Height: | 117.2 mm |
| Height (inches): | 4.614 inch |
| Depth: | 114 mm |
| Depth (inches): | 4.488 inch |
| Weight: | 126 g |
| Net weight: | 100 g |
| Humidity: | 5...95 %, no condensation |
| Storage temperature, min.: | -40 °C |
| Ambient temperature: | -20 °C...+60 °C |
| Storage temperature: | -40 °C... |
| REACH SVHC: | Lead 7439-92-1 |
| Number of inputs: | 1 |
| Sensor: | Current source |
| Input current: | 0(4)...20 mA current loop |
| Voltage drop, current input: | 3.8 V |
| Number of outputs: | 1 |
| Output current: | 0…20 mA (if input: 0…20 mA), 4…20 mA (if input: 4…20 mA) |
| Load impedance current: | ≤ 600 Ω |
| Accuracy: | < 0.1 % of end value |
| Configuration: | none |
| Galvanic isolation: | 2-way isolator |
| Rail: | TS 35 |
| Step response time: | ≤ 1 ms |
| Temperature coefficient: | ≤ 100 ppm/K |
| Voltage supply: | Loop powered, via 4…20 mA input |
| EMC standards: | EN 61010-1:2011, UL 61010-1, IEC61000-6-2, IEC 61000-6-4 |
| Galvanic isolation: | 2-way isolator |
| Impulse withstand voltage: | 4 kV (1.2/50 µs) |
| Insulation voltage: | 2 kV inputs / outputs |
| Pollution severity: | 2 |
| Rated voltage: | 300 V |
| Surge voltage category: | III |
| Marking: | II 3 G Ex ec IIC T6 Gc |
| Type of connection: | Screw connection |
| Tightening torque, min.: | 0.4 Nm |
| Tightening torque, max.: | 0.6 Nm |
| Clamping range, rated connection: | 2.5 mm² |
| Clamping range, min.: | 0.5 mm² |
| Clamping range, max.: | 2.5 mm² |
| Wire connection cross section AWG, min.: | AWG 26 |
| Wire connection cross section AWG, max.: | AWG 12 |
| ETIM 6.0: | EC002475 |
| ETIM 7.0: | EC002475 |
| eClass 9.0: | 27-21-01-23 |
| eClass 9.1: | 27-21-01-23 |
| eClass 10.0: | 27-21-01-23 |
| ROHS: | Conform |
| Type: | ACT20P-CI-CO-ILP-S |
| Order No.: | 7760054123 |
| Version: | Signal converter/isolator, Input current loop feed, Input : 0(4)-20 mA, (loop powered), Output : 0(4)-20 mA |
| GTIN (EAN): | 6944169656637 |
| Qty.: | 1 pc(s). |
| Width: | 12.5 |
| Width (inches): | 0.492 inch |
| Height: | 117.2 mm |
| Height (inches): | 4.614 inch |
| Depth: | 114 mm |
| Depth (inches): | 4.488 inch |
| Weight: | 126 g |
| Net weight: | 100 g |
| Humidity: | 5...95 %, no condensation |
| Storage temperature, min.: | -40 °C |
| Ambient temperature: | -20 °C...+60 °C |
| Storage temperature: | -40 °C... |
| REACH SVHC: | Lead 7439-92-1 |
| Number of inputs: | 1 |
| Sensor: | Current source |
| Input current: | 0(4)...20 mA current loop |
| Voltage drop, current input: | 3.8 V |
| Number of outputs: | 1 |
| Output current: | 0…20 mA (if input: 0…20 mA), 4…20 mA (if input: 4…20 mA) |
| Load impedance current: | ≤ 600 Ω |
| Accuracy: | < 0.1 % of end value |
| Configuration: | none |
| Galvanic isolation: | 2-way isolator |
| Rail: | TS 35 |
| Step response time: | ≤ 1 ms |
| Temperature coefficient: | ≤ 100 ppm/K |
| Voltage supply: | Loop powered, via 4…20 mA input |
| EMC standards: | EN 61010-1:2011, UL 61010-1, IEC61000-6-2, IEC 61000-6-4 |
| Galvanic isolation: | 2-way isolator |
| Impulse withstand voltage: | 4 kV (1.2/50 µs) |
| Insulation voltage: | 2 kV inputs / outputs |
| Pollution severity: | 2 |
| Rated voltage: | 300 V |
| Surge voltage category: | III |
| Marking: | II 3 G Ex ec IIC T6 Gc |
| Type of connection: | Screw connection |
| Tightening torque, min.: | 0.4 Nm |
| Tightening torque, max.: | 0.6 Nm |
| Clamping range, rated connection: | 2.5 mm² |
| Clamping range, min.: | 0.5 mm² |
| Clamping range, max.: | 2.5 mm² |
| Wire connection cross section AWG, min.: | AWG 26 |
| Wire connection cross section AWG, max.: | AWG 12 |
| ETIM 6.0: | EC002475 |
| ETIM 7.0: | EC002475 |
| eClass 9.0: | 27-21-01-23 |
| eClass 9.1: | 27-21-01-23 |
| eClass 10.0: | 27-21-01-23 |
| ROHS: | Conform |
Parametry logistyczne
| ECCN: | |
| Kraj pochodzenia: | |
| EAN: | |
| Waga: | 0,125 kg |
| Długość: | 0,00 m |
| Szerokość: | 0,00 m |
| Wysokość: | 0,00 m |