7760054119
ACT20P-CI2-CO-OLP-S
| Type: | ACT20P-CI2-CO-OLP-S |
| Order No.: | 7760054119 |
| Version: | Signal converter/isolator, Output current loop powered, Input : 4-20 mA, Output : 4-20 mA, (loop powered) |
| GTIN (EAN): | 6944169656590 |
| Qty.: | 1 pc(s). |
| Width: | 12.5 |
| Width (inches): | 0.492 inch |
| Height: | 117.2 mm |
| Height (inches): | 4.614 inch |
| Depth: | 114 mm |
| Depth (inches): | 4.488 inch |
| Weight: | 126 g |
| Net weight: | 100 g |
| Humidity: | 5...95 %, no condensation |
| Operating temperature, max.: | 60 °C |
| Operating temperature, min.: | -20 °C |
| Storage temperature, max.: | 85 °C |
| Storage temperature, min.: | -40 °C |
| Operating temperature: | -20 °C...60 °C |
| Ambient temperature: | -20 °C...+60 °C |
| Storage temperature: | -40 °C...85 °C |
| REACH SVHC: | Lead 7439-92-1 |
| Number of inputs: | 1 |
| Sensor: | Current source |
| Input current: | 4…20mA |
| Voltage drop, current input: | < 3 V |
| Number of outputs: | 1 |
| Output current: | 4...20 mA, loop-powered |
| Load impedance current: | ≤ 600 Ω |
| Accuracy: | < 0.1 % of end value |
| Configuration: | none |
| Galvanic isolation: | 2-way isolator |
| Rail: | TS 35 |
| Step response time: | ≤ 2 ms |
| Temperature coefficient: | ≤ 100 ppm/K |
| Voltage supply: | via output current loop, min. 12 V DC/ max. 30 V DC |
| EMC standards: | EN 61010-1:2011, UL 61010-1, IEC61000-6-2, IEC 61000-6-4 |
| Galvanic isolation: | 2-way isolator |
| Impulse withstand voltage: | 4 kV (1.2/50 µs) |
| Insulation voltage: | 2 kV inputs / outputs |
| Pollution severity: | 2 |
| Rated voltage: | 300 V |
| Surge voltage category: | III |
| Marking: | II 3 G Ex ec IIC T6 Gc |
| Type of connection: | Screw connection |
| Tightening torque, min.: | 0.4 Nm |
| Tightening torque, max.: | 0.6 Nm |
| Clamping range, rated connection: | 2.5 mm² |
| Clamping range, min.: | 0.5 mm² |
| Clamping range, max.: | 2.5 mm² |
| Wire connection cross section AWG, min.: | AWG 26 |
| Wire connection cross section AWG, max.: | AWG 12 |
| ETIM 6.0: | EC002475 |
| ETIM 7.0: | EC002475 |
| eClass 9.0: | 27-21-01-23 |
| eClass 9.1: | 27-21-01-23 |
| eClass 10.0: | 27-21-01-23 |
| ROHS: | Conform |
| Type: | ACT20P-CI2-CO-OLP-S |
| Order No.: | 7760054119 |
| Version: | Signal converter/isolator, Output current loop powered, Input : 4-20 mA, Output : 4-20 mA, (loop powered) |
| GTIN (EAN): | 6944169656590 |
| Qty.: | 1 pc(s). |
| Width: | 12.5 |
| Width (inches): | 0.492 inch |
| Height: | 117.2 mm |
| Height (inches): | 4.614 inch |
| Depth: | 114 mm |
| Depth (inches): | 4.488 inch |
| Weight: | 126 g |
| Net weight: | 100 g |
| Humidity: | 5...95 %, no condensation |
| Operating temperature, max.: | 60 °C |
| Operating temperature, min.: | -20 °C |
| Storage temperature, max.: | 85 °C |
| Storage temperature, min.: | -40 °C |
| Operating temperature: | -20 °C...60 °C |
| Ambient temperature: | -20 °C...+60 °C |
| Storage temperature: | -40 °C...85 °C |
| REACH SVHC: | Lead 7439-92-1 |
| Number of inputs: | 1 |
| Sensor: | Current source |
| Input current: | 4…20mA |
| Voltage drop, current input: | < 3 V |
| Number of outputs: | 1 |
| Output current: | 4...20 mA, loop-powered |
| Load impedance current: | ≤ 600 Ω |
| Accuracy: | < 0.1 % of end value |
| Configuration: | none |
| Galvanic isolation: | 2-way isolator |
| Rail: | TS 35 |
| Step response time: | ≤ 2 ms |
| Temperature coefficient: | ≤ 100 ppm/K |
| Voltage supply: | via output current loop, min. 12 V DC/ max. 30 V DC |
| EMC standards: | EN 61010-1:2011, UL 61010-1, IEC61000-6-2, IEC 61000-6-4 |
| Galvanic isolation: | 2-way isolator |
| Impulse withstand voltage: | 4 kV (1.2/50 µs) |
| Insulation voltage: | 2 kV inputs / outputs |
| Pollution severity: | 2 |
| Rated voltage: | 300 V |
| Surge voltage category: | III |
| Marking: | II 3 G Ex ec IIC T6 Gc |
| Type of connection: | Screw connection |
| Tightening torque, min.: | 0.4 Nm |
| Tightening torque, max.: | 0.6 Nm |
| Clamping range, rated connection: | 2.5 mm² |
| Clamping range, min.: | 0.5 mm² |
| Clamping range, max.: | 2.5 mm² |
| Wire connection cross section AWG, min.: | AWG 26 |
| Wire connection cross section AWG, max.: | AWG 12 |
| ETIM 6.0: | EC002475 |
| ETIM 7.0: | EC002475 |
| eClass 9.0: | 27-21-01-23 |
| eClass 9.1: | 27-21-01-23 |
| eClass 10.0: | 27-21-01-23 |
| ROHS: | Conform |
| ECCN: | |
| Kraj pochodzenia: | |
| EAN: | |
| Waga: | 0,128 kg |
| Długość: | 0,00 m |
| Szerokość: | 0,00 m |
| Wysokość: | 0,00 m |