View this page in: English
Email: "ucnguBrctvdgcxgt0eqo"
Wybierz język
1-Click Zapytanie
Produkt
Weidmueller
2519590000
KLIPPON BDX M25 S
Poproś o ofertę
Prawa autorskie do obrazu: Weidmueller
Weidmueller 2519590000
KLIPPON BDX M25 S
Na prośbę. Prześlij nam wiadomość e-mail z zapytaniem o cenę i dostępność.
"ucnguBrctvdgcxgt0eqo"
Opis
Parametry techniczne
| Type: | KLIPPON BDX M25 S |
| Order No.: | 2519590000 |
| Version: | Klippon BDX (compensating elements), Compensating element, M 25, 10 mm, IP66, Stainless steel 1.4404 (316L) |
| GTIN (EAN): | 4050118532081 |
| Qty.: | 1 pc(s). |
| Length: | 22 mm |
| Length (inches): | 0.866 inch |
| Width: | 32 mm |
| Width (inches): | 1.26 inch |
| Net weight: | 60 g |
| Approval conditions: | ATEX, IECEX, EAC |
| Certificate no. cable gland (ATEX): | SIRA 09ATEX3321X |
| Certificate no. cable gland (CSA): | 2310046 |
| Certificate no. cable gland (EAC): | RU C-GB.ГБ06.B.00098 |
| Certificate no. cable gland (IECEx): | IECEx SIR 09.0132X |
| Certificate no. cable gland (LLOYDSREG): | 10/00056 |
| Certificate no. cable gland (MARITREG): | 09.00783.011 |
| Material: | Stainless steel 1.4404 (316L) |
| External thread: | M 25 |
| Pitch of thread: | 1.5 mm |
| Length of thread: | 10 mm |
| AF size 1: | 32 mm |
| Impact resistance: | 7 J ATEX version |
| Protection degree: | IP66 |
| Protection degree with GWDR: | IP66 |
| Operating temperature range, min.: | -60 °C |
| Operating temperature range, max.: | 200 °C |
| Head diameter: | 31 mm |
| Air flow: | 0.25 l / 1 h |
| Filter: | Bronze insert (90% copper, 10% tin) |
| O-Ring: | Silicone |
| Sealing: | Silicone |
| Tightening torque: | 10 Nm |
| Torque for connecting adapter, min.: | 10 Nm |
| Torque for connecting adapter, max.: | 10 Nm |
| Torque for lock nut, min.: | 10 Nm |
| Torque for lock nut, max.: | 10 Nm |
| Explosion protection type: | Improved safety Ex e |
| Standards: | IEC 60079-0, IEC 60079-7, IEC 60079-31 |
| Note: protection class: | - The venting element should be fitted on the bottom side of the enclosure, aligned vertically with the thread upwards, and at the lowest point to permit proper drainage. - The supplied assembly instructions must be read prior to installation and strictly adhered to. - The water flow rate was tested using a water-filled, empty enclosure (no pressure or heat-producing internal components). The water flow rate may vary due to operational parameters and environmental conditions. |
| ETIM 6.0: | EC000814 |
| ETIM 7.0: | EC000814 |
| eClass 9.0: | 27-14-44-25 |
| eClass 9.1: | 27-14-44-90 |
| eClass 10.0: | 27-14-44-25 |
| ROHS: | Conform |
| Type: | KLIPPON BDX M25 S |
| Order No.: | 2519590000 |
| Version: | Klippon BDX (compensating elements), Compensating element, M 25, 10 mm, IP66, Stainless steel 1.4404 (316L) |
| GTIN (EAN): | 4050118532081 |
| Qty.: | 1 pc(s). |
| Length: | 22 mm |
| Length (inches): | 0.866 inch |
| Width: | 32 mm |
| Width (inches): | 1.26 inch |
| Net weight: | 60 g |
| Approval conditions: | ATEX, IECEX, EAC |
| Certificate no. cable gland (ATEX): | SIRA 09ATEX3321X |
| Certificate no. cable gland (CSA): | 2310046 |
| Certificate no. cable gland (EAC): | RU C-GB.ГБ06.B.00098 |
| Certificate no. cable gland (IECEx): | IECEx SIR 09.0132X |
| Certificate no. cable gland (LLOYDSREG): | 10/00056 |
| Certificate no. cable gland (MARITREG): | 09.00783.011 |
| Material: | Stainless steel 1.4404 (316L) |
| External thread: | M 25 |
| Pitch of thread: | 1.5 mm |
| Length of thread: | 10 mm |
| AF size 1: | 32 mm |
| Impact resistance: | 7 J ATEX version |
| Protection degree: | IP66 |
| Protection degree with GWDR: | IP66 |
| Operating temperature range, min.: | -60 °C |
| Operating temperature range, max.: | 200 °C |
| Head diameter: | 31 mm |
| Air flow: | 0.25 l / 1 h |
| Filter: | Bronze insert (90% copper, 10% tin) |
| O-Ring: | Silicone |
| Sealing: | Silicone |
| Tightening torque: | 10 Nm |
| Torque for connecting adapter, min.: | 10 Nm |
| Torque for connecting adapter, max.: | 10 Nm |
| Torque for lock nut, min.: | 10 Nm |
| Torque for lock nut, max.: | 10 Nm |
| Explosion protection type: | Improved safety Ex e |
| Standards: | IEC 60079-0, IEC 60079-7, IEC 60079-31 |
| Note: protection class: | - The venting element should be fitted on the bottom side of the enclosure, aligned vertically with the thread upwards, and at the lowest point to permit proper drainage. - The supplied assembly instructions must be read prior to installation and strictly adhered to. - The water flow rate was tested using a water-filled, empty enclosure (no pressure or heat-producing internal components). The water flow rate may vary due to operational parameters and environmental conditions. |
| ETIM 6.0: | EC000814 |
| ETIM 7.0: | EC000814 |
| eClass 9.0: | 27-14-44-25 |
| eClass 9.1: | 27-14-44-90 |
| eClass 10.0: | 27-14-44-25 |
| ROHS: | Conform |
Parametry logistyczne
| ECCN: | |
| Kraj pochodzenia: | |
| EAN: | |
| Waga: | 0,092 kg |
| Długość: | 0,00 m |
| Szerokość: | 0,00 m |
| Wysokość: | 0,00 m |