View this page in: English
Email: "ucnguBrctvdgcxgt0eqo"
Wybierz język
1-Click Zapytanie
Produkt
Weidmueller
2501110000
PICOPAK-CI-CO-LP-P
Poproś o ofertę
Prawa autorskie do obrazu: Weidmueller
Weidmueller 2501110000
PICOPAK-CI-CO-LP-P
Na prośbę. Prześlij nam wiadomość e-mail z zapytaniem o cenę i dostępność.
"ucnguBrctvdgcxgt0eqo"
Opis
Parametry techniczne
| Type: | PICOPAK-CI-CO-LP-P |
| Order No.: | 2501110000 |
| Version: | Signal converter/insulator, Output current loop powered, Input : 4-20 mA, Output : 4-20 mA |
| GTIN (EAN): | 4050118514704 |
| Qty.: | 1 pc(s). |
| Width: | 6.1 |
| Width (inches): | 0.24 inch |
| Height: | 79.4 mm |
| Height (inches): | 3.126 inch |
| Depth: | 55 mm |
| Depth (inches): | 2.165 inch |
| Weight: | 50 g |
| Net weight: | 47 g |
| Humidity: | 0...95 % (no condensation) |
| Operating temperature, max.: | 70 °C |
| Operating temperature, min.: | -40 °C |
| Storage temperature, max.: | 85 °C |
| Storage temperature, min.: | -40 °C |
| Operating temperature: | -40 °C...70 °C |
| Storage temperature: | -40 °C...85 °C |
| Certificate No. (cURus): | E141197 |
| Number of inputs: | 1 |
| Sensor: | Current source |
| Input current: | 4...20 mA |
| Voltage drop, current input: | ≤3,5 V |
| Number of outputs: | 1 |
| Output current: | 4...20 mA, loop-powered |
| Cut-off frequency (-3 dB): | ≥3,5 kHz |
| Load impedance current: | ≤ 600 Ω |
| Supply voltage (output): | 18…32 V |
| Accuracy: | < 0.1 % of measuring range |
| Configuration: | Potentiometer |
| Galvanic isolation: | 2-way isolator |
| Long-term drift: | ≤±0.05% of the measurement range / year |
| Power consumption, max.: | 0.85 W |
| Power consumption, typ.: | 0.55 W |
| Rail: | TS 35 |
| Standard: | EN 61010-1, EN 61326-1, UL 61010-1:2012, 3rd Edition |
| Step response time: | ≤ 5 ms |
| Temperature coefficient: | ≤ 200 ppm/K |
| Voltage supply: | Output loop powered |
| EMC standards: | EN 61326-1 |
| Galvanic isolation: | 2-way isolator |
| Insulation voltage: | 3.5 kV |
| Pollution severity: | 2 |
| Standard: | EN 61010-1, EN 61326-1, UL 61010-1:2012, 3rd Edition |
| Surge voltage category: | II |
| Type of connection: | PUSH IN |
| Wire connection cross-section, finely stranded, min.: | 0.5 mm² |
| Wire connection cross section, finely stranded, max.: | 1.5 mm² |
| Wire cross-section, finely stranded, min. (AWG): | AWG 20 |
| Wire cross-section, finely stranded, max. (AWG): | AWG 14 |
| Product information: | The passive Isolator PicoPak-CI-CO-LP separates stand- analogue current signals. An analogue input current signal is converted linear and galvanic isolated into an analogue out- put current signal. The power supply occurs through the input and output measuring circuit. The measuring range can be adjusted if necessary via the potentiometers (Zero and Span) installed on the front. |
| ETIM 6.0: | EC002653 |
| ETIM 7.0: | EC002653 |
| eClass 9.0: | 27-21-01-20 |
| eClass 9.1: | 27-21-01-90 |
| eClass 10.0: | 27-21-01-20 |
| ROHS: | Conform |
| Type: | PICOPAK-CI-CO-LP-P |
| Order No.: | 2501110000 |
| Version: | Signal converter/insulator, Output current loop powered, Input : 4-20 mA, Output : 4-20 mA |
| GTIN (EAN): | 4050118514704 |
| Qty.: | 1 pc(s). |
| Width: | 6.1 |
| Width (inches): | 0.24 inch |
| Height: | 79.4 mm |
| Height (inches): | 3.126 inch |
| Depth: | 55 mm |
| Depth (inches): | 2.165 inch |
| Weight: | 50 g |
| Net weight: | 47 g |
| Humidity: | 0...95 % (no condensation) |
| Operating temperature, max.: | 70 °C |
| Operating temperature, min.: | -40 °C |
| Storage temperature, max.: | 85 °C |
| Storage temperature, min.: | -40 °C |
| Operating temperature: | -40 °C...70 °C |
| Storage temperature: | -40 °C...85 °C |
| Certificate No. (cURus): | E141197 |
| Number of inputs: | 1 |
| Sensor: | Current source |
| Input current: | 4...20 mA |
| Voltage drop, current input: | ≤3,5 V |
| Number of outputs: | 1 |
| Output current: | 4...20 mA, loop-powered |
| Cut-off frequency (-3 dB): | ≥3,5 kHz |
| Load impedance current: | ≤ 600 Ω |
| Supply voltage (output): | 18…32 V |
| Accuracy: | < 0.1 % of measuring range |
| Configuration: | Potentiometer |
| Galvanic isolation: | 2-way isolator |
| Long-term drift: | ≤±0.05% of the measurement range / year |
| Power consumption, max.: | 0.85 W |
| Power consumption, typ.: | 0.55 W |
| Rail: | TS 35 |
| Standard: | EN 61010-1, EN 61326-1, UL 61010-1:2012, 3rd Edition |
| Step response time: | ≤ 5 ms |
| Temperature coefficient: | ≤ 200 ppm/K |
| Voltage supply: | Output loop powered |
| EMC standards: | EN 61326-1 |
| Galvanic isolation: | 2-way isolator |
| Insulation voltage: | 3.5 kV |
| Pollution severity: | 2 |
| Standard: | EN 61010-1, EN 61326-1, UL 61010-1:2012, 3rd Edition |
| Surge voltage category: | II |
| Type of connection: | PUSH IN |
| Wire connection cross-section, finely stranded, min.: | 0.5 mm² |
| Wire connection cross section, finely stranded, max.: | 1.5 mm² |
| Wire cross-section, finely stranded, min. (AWG): | AWG 20 |
| Wire cross-section, finely stranded, max. (AWG): | AWG 14 |
| Product information: | The passive Isolator PicoPak-CI-CO-LP separates stand- analogue current signals. An analogue input current signal is converted linear and galvanic isolated into an analogue out- put current signal. The power supply occurs through the input and output measuring circuit. The measuring range can be adjusted if necessary via the potentiometers (Zero and Span) installed on the front. |
| ETIM 6.0: | EC002653 |
| ETIM 7.0: | EC002653 |
| eClass 9.0: | 27-21-01-20 |
| eClass 9.1: | 27-21-01-90 |
| eClass 10.0: | 27-21-01-20 |
| ROHS: | Conform |
Parametry logistyczne
| ECCN: | |
| Kraj pochodzenia: | |
| EAN: | |
| Waga: | 0,047 kg |
| Długość: | 0,00 m |
| Szerokość: | 0,00 m |
| Wysokość: | 0,00 m |