View this page in: English
Email: "ucnguBrctvdgcxgt0eqo"
Wybierz język
1-Click Zapytanie
Produkt
Weidmueller
2489740000
ACT20P-CI-VO-P
Poproś o ofertę
Prawa autorskie do obrazu: Weidmueller
Weidmueller 2489740000
ACT20P-CI-VO-P
Na prośbę. Prześlij nam wiadomość e-mail z zapytaniem o cenę i dostępność.
"ucnguBrctvdgcxgt0eqo"
Opis
Parametry techniczne
| Type: | ACT20P-CI-VO-P |
| Order No.: | 2489740000 |
| Version: | Signal converter/isolator, Input : 0(4)-20 mA, Output : 0-10 V |
| GTIN (EAN): | 4050118535181 |
| Qty.: | 1 pc(s). |
| Width: | 12.5 mm |
| Width (inches): | 0.492 inch |
| Height: | 127.1 mm |
| Height (inches): | 5.004 inch |
| Depth: | 113.7 mm |
| Depth (inches): | 4.476 inch |
| Weight: | 110 g |
| Net weight: | 120 g |
| Humidity: | 5...95 %, no condensation |
| Operating temperature, max.: | 60 °C |
| Operating temperature, min.: | -20 °C |
| Storage temperature, max.: | 85 °C |
| Storage temperature, min.: | -40 °C |
| Operating temperature: | -20 °C...60 °C |
| Storage temperature: | -40 °C...85 °C |
| REACH SVHC: | Lead 7439-92-1 |
| Number of inputs: | 1 |
| Sensor supply: | > 17 V DC at 20 mA |
| Input signal: | 2-/3-wire transmitter, Current source |
| Input current: | 0...20 mA, 4…20mA |
| Voltage drop: | ≤ 1 V |
| Number of outputs: | 1 |
| Output voltage, note: | 0…10 V (if input: 0…20 mA), 2…10 V (if input: 4…20 mA) |
| load impedance voltage: | ≥ 600 kΩ |
| Accuracy: | ±0,1 % FSR max., 0,05 % FSR typ. |
| Configuration: | none |
| Current consumption: | ≤60 mA (24V power supply, 20mA output) |
| Galvanic isolation: | 3-way isolator, between input ⁄ output ⁄ supply |
| Rail: | TS 35 |
| Step response time: | ≤ 0,5 ms |
| Temperature coefficient: | 80 ppm/K |
| Voltage supply: | 20…30 V DC |
| EMC standards: | EN 61326-1 |
| Galvanic isolation: | 3-way isolator, between input ⁄ output ⁄ supply |
| Impulse withstand voltage: | 4 kV (1.2/50 µs) |
| Insulation voltage: | 2 kV inputs / outputs / power supply |
| Pollution severity: | 2 |
| Surge voltage category: | III |
| Marking: | II 3 G Ex ec IIC T5 Gc |
| Type of connection: | PUSH IN |
| Wire connection cross section AWG, min.: | AWG 26 |
| Wire connection cross section AWG, max.: | AWG 14 |
| Wire cross-section, solid, min.: | 0.2 mm² |
| Wire cross-section, solid, max.: | 2.5 mm² |
| Wire connection cross-section, finely stranded, min.: | 0.2 mm² |
| Wire connection cross section, finely stranded, max.: | 2.5 mm² |
| Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min.: | 0.2 mm² |
| Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max.: | 2.5 mm² |
| ETIM 6.0: | EC002653 |
| ETIM 7.0: | EC002653 |
| eClass 9.0: | 27-21-01-20 |
| eClass 9.1: | 27-21-01-90 |
| eClass 10.0: | 27-21-01-20 |
| Approvals: | CULUS; |
| ROHS: | Conform |
| Type: | ACT20P-CI-VO-P |
| Order No.: | 2489740000 |
| Version: | Signal converter/isolator, Input : 0(4)-20 mA, Output : 0-10 V |
| GTIN (EAN): | 4050118535181 |
| Qty.: | 1 pc(s). |
| Width: | 12.5 mm |
| Width (inches): | 0.492 inch |
| Height: | 127.1 mm |
| Height (inches): | 5.004 inch |
| Depth: | 113.7 mm |
| Depth (inches): | 4.476 inch |
| Weight: | 110 g |
| Net weight: | 120 g |
| Humidity: | 5...95 %, no condensation |
| Operating temperature, max.: | 60 °C |
| Operating temperature, min.: | -20 °C |
| Storage temperature, max.: | 85 °C |
| Storage temperature, min.: | -40 °C |
| Operating temperature: | -20 °C...60 °C |
| Storage temperature: | -40 °C...85 °C |
| REACH SVHC: | Lead 7439-92-1 |
| Number of inputs: | 1 |
| Sensor supply: | > 17 V DC at 20 mA |
| Input signal: | 2-/3-wire transmitter, Current source |
| Input current: | 0...20 mA, 4…20mA |
| Voltage drop: | ≤ 1 V |
| Number of outputs: | 1 |
| Output voltage, note: | 0…10 V (if input: 0…20 mA), 2…10 V (if input: 4…20 mA) |
| load impedance voltage: | ≥ 600 kΩ |
| Accuracy: | ±0,1 % FSR max., 0,05 % FSR typ. |
| Configuration: | none |
| Current consumption: | ≤60 mA (24V power supply, 20mA output) |
| Galvanic isolation: | 3-way isolator, between input ⁄ output ⁄ supply |
| Rail: | TS 35 |
| Step response time: | ≤ 0,5 ms |
| Temperature coefficient: | 80 ppm/K |
| Voltage supply: | 20…30 V DC |
| EMC standards: | EN 61326-1 |
| Galvanic isolation: | 3-way isolator, between input ⁄ output ⁄ supply |
| Impulse withstand voltage: | 4 kV (1.2/50 µs) |
| Insulation voltage: | 2 kV inputs / outputs / power supply |
| Pollution severity: | 2 |
| Surge voltage category: | III |
| Marking: | II 3 G Ex ec IIC T5 Gc |
| Type of connection: | PUSH IN |
| Wire connection cross section AWG, min.: | AWG 26 |
| Wire connection cross section AWG, max.: | AWG 14 |
| Wire cross-section, solid, min.: | 0.2 mm² |
| Wire cross-section, solid, max.: | 2.5 mm² |
| Wire connection cross-section, finely stranded, min.: | 0.2 mm² |
| Wire connection cross section, finely stranded, max.: | 2.5 mm² |
| Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min.: | 0.2 mm² |
| Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max.: | 2.5 mm² |
| ETIM 6.0: | EC002653 |
| ETIM 7.0: | EC002653 |
| eClass 9.0: | 27-21-01-20 |
| eClass 9.1: | 27-21-01-90 |
| eClass 10.0: | 27-21-01-20 |
| Approvals: | CULUS; |
| ROHS: | Conform |
Parametry logistyczne
| ECCN: | |
| Kraj pochodzenia: | |
| EAN: | |
| Waga: | 0,12 kg |
| Długość: | 0,00 m |
| Szerokość: | 0,00 m |
| Wysokość: | 0,00 m |